Summary of the content on the page No. 1
USER’S GUIDE
V:1647-0816-10
TE1380
13” HDTV
For the most up-to-date version of this User’s Guide, go to www.gpx.com
Summary of the content on the page No. 2
Warnings and Precautions • CAUTION: TO PREVENT ELECTRIC SHOCK, • W ARNING: Lithium batteries, like all rechargeable MATCH WIDE BLADE OF PLUG TO WIDE SLOT, batteries are recyclable and should be recycled or FULLY INSERT. disposed of in normal household waste. Contact your local government for disposal or recycling practices in • W ARNING: To reduce the risk of fire or electric shock, your area. They should never be incinerated since they do not expose this apparatus to rain or moisture.
Summary of the content on the page No. 3
Important Safety Instructions 1. Read these Instructions. FCC Warnings 2. Keep these Instructions. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the 3. Heed all Warnings. user’s authority to operate the equipment. 4. Follow all instructions. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC 5. Do not use this apparatus near water. Rule
Summary of the content on the page No. 4
13” HDTV Features Included • 13.3” LED display • TE1380 • ATSC/NTSC tuner • Remote: requires 2, AAA size, batteries • Electronic program guide (included) • Aspect ratio: 16:9 widescreen • Detachable stand: requires 3 screws • Resolution: 1280 x 800 (included) • TV supports: 480p, 480i, 720p, 1080i, 1080p • AC/DC power adapter • Viewing angle: 40˚ (H) x 25˚ (V) • Contrast: 500:1 2 • Brightness: 200 cd/m • Response time: <16ms • Color: 16.7 million • V-chip • Closed captioning • Multi-language
Summary of the content on the page No. 5
TAble o F Con Ten TS Warnings and Precautions 2 Important Safety Instructions 3 • FCC Warnings • Additional Warnings 13” HDTV 4 • Features • Included Introduction 6 Setup
Summary of the content on the page No. 6
Introduction MenU Press to access the television menu. Po WeR Vol UMe Press to power Press to adjust the the television off volume. or on. CHAnnel SoURCe Press to adjust the Press to adjust the television channel. television source. DC Po WeR InPUT USb PoRT Use for connecting a thumb drive or for software updates. HDMI InPUTS VGA/PC InPUT PC AUDIo InPUT RF InPUT CoMPonenT VIDeo InPUT STeReo RCA STeReo HeADPHone AUDIo InPUT CoMPoSITe JACK VIDeo InPUT 6 GPX
Summary of the content on the page No. 7
Po WeR MUTe Press to power the television off or on. Press to mute the volume. nUMbeR KeYPAD SleeP Press repeatedly to set the sleep timer. PReV After the set time has expired the television In TV mode, press to switch to the previous will automatically power off. channel. ASPeCT FReeZe Press to adjust the aspect ratio between Press to freeze or unfreeze the current FULL, NORMAL, WATERGLASS, and CINEMA. frame in TV mode. PICTURe GUIDe Press to adjust the picture between In TV mode, press to v
Summary of the content on the page No. 8
Setup Power DC power input: requires an AC/DC power adapter (included). Plug the included AC/DC power adapter into the DC Po WeR InPUT and a standard AC power outlet to power the television. Remote Requires 2, AAA size, batteries (included) TV Stand Requires TV stand and screws (included). The TV stand can be removed allowing you to mount the TV onto a wall. When removing or attached the TV stand, use a philips-head screwdriver to loosen or tighten the screws. Using an power drill could da
Summary of the content on the page No. 9
Television Setup Connecting a TV Antenna Connecting basic Cable Requires a TV antenna (not included). Requires a cable connection. 1. Connect a VHF, UHF, or HDTV antenna to the 1. Connect a cable to the RF InPUT on the RF InPUT on the television. television. 2. Press the SoURCe button to switch to TV 2. Press the SoURCe button to switch to TV mode. mode. 3. Press the MenU button to access the setup 3. Press the MenU button to access the setup menu. menu. 4. Press the ARRo W () buttons to 4.
Summary of the content on the page No. 10
Television Auto Scanning for Channels The Auto Channel Scan must be run before any channels can be viewed on the television. 1. Press the SoURCe button to switch to TV mode. 2. Press the MenU button to access the setup menu. 3. Press the ARRo W () buttons to highlight the CHANNEL icon. Press the enTeR button. 4. Press the ARRo W () buttons to highlight SIGNAL TYPE. Press the ARRo W () buttons to select AIR. 5. Press the ARRo W () buttons to highlight AUTO CHANNEL SEARCH. Press the en
Summary of the content on the page No. 11
Television Setting the Clock Television Menu 1. Press the MenU button to access the setup Press the MenU button to access the TV menu. menu. Press the eXIT button to exit the TV menu. 2. Press the ARRo W () buttons to Picture highlight the SETUP icon. Press the enTeR Picture Settings button. Screen Settings 3. Press the ARRo W () buttons to PC Settings highlight CLOCK. Press the enTeR button. Color Temperature Advanced Picture Settings 4. Press the ARRo W () buttons to highlight TIME
Summary of the content on the page No. 12
HDMI HDMI Connecting Other Devices (Set-Top Box, Gaming Device, DVD Player, VCR, or PC) Composite and Connecting a Set-Top box RCA ster eo • You will need: a set-top box, composite and RCA stereo cables or component and RCA stereo cables or an HDMI cable. (not included) • Connect the set-top box’s audio and video outputs to the corresponding audio and video inputs on the television. • Power the television on and press the SoURCe button to switch to the connected input. (AV (composite),
Summary of the content on the page No. 13
vGA/PC INPUT Connecting a Computer • You will need: a PC with a VGA output, and a PC Audio Input VGA cable. (not included) • Connect the computer’s VGA output to the VGA/PC In PUT on the television. • Power the television on and press the SoURCe button to switch to the PC Mode. • Audio from the connected PC can be input to the television through the TV’s PC AUDIo In PUT by using a 3.5mm audio cable (not included). Customer Support: 1-888-999-4215 GPX 13
Summary of the content on the page No. 14
USB Port Connecting a USb Thumb Drive 1. Load a USB thumb drive into the USb PoRT as shown in the image to the right. Using a Connected USb Thumb Drive 1. Follow the instructions for Connecting a USB thumb drive. 2. Press the SoURCe button to switch to Media mode. 3. Use the ARRo W and enTeR buttons to select and play content from the connected USB thumb drive. 4. Press the eXIT button to return to the media menu. The USB port can also be used to upgrade the televisions firmware. For deta
Summary of the content on the page No. 15
Customer Support: 1-888-999-4215 GPX 15
Summary of the content on the page No. 16
Company Information International Support To download this User’s Guide in English, Spanish, or French, visit the support section at www.gpx.com. Para transferir esta guía de usuario en inglés, español, o francés, visite la sección de la ayuda en www.gpx.com. Pour télécharger ce guide de l’utilisateur en anglais, espagnol, ou français, visitez la section de soutien chez www.gpx.com. Contact Information Phone: 1-888-999-4215 email: prodinfo@gpx.com Parts email: partsinfo@dpi-global.com Web
