Summary of the content on the page No. 1
H
Summary of the content on the page No. 2
English TABLE OF CONTENTS FOR YOUR SAFETY …………………………………………………….... 2 PRCAUTIONS AND REMINDERS ………………………………………. 4 IMPORTANT SAFETY INSTRUCTIONS ……………………………….. 6 Package Contents………………………………………………… 8 Attaching the Base ………………………………………………… 8 Preparing Your LCD HDTV for Wall Mounting ……………… 9 PREPARATION …………………………………………………………… 10 PERIPHERAL CONNECTION GUIDE …………………………………. 12 OPERATING INSTRUCTIONS …………………………………………. 14 TO USE THE FRONT PANEL CONTROL ……………………... 14 T
Summary of the content on the page No. 3
SYMBOL SYMBOL DEFINITION DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that SA 1965 may be of sufficient magnitude to constitute a risk of electrical shock to persons. INSTRUCTIONS: The exclamation point within on equilateral triangle to alert the User to the presence of important operating and maintenance (servicing)
Summary of the content on the page No. 4
FOR YOUR SAFETY Before operating the TV please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equi
Summary of the content on the page No. 5
This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on February 17, 2009. Some older television receivers, if they rely on a TV antenna, will need a TV Converter to receive over the air digital pro-gramming, but should continue to work as before for other purposes (e.g., for watching low-power TV stations still broadcasting in analog, wat
Summary of the content on the page No. 6
PRECAUTIONS AND REMINDERS Place unit on even surfaces. Don't place the TV in confined spaces or in a box when using it. Unplug immediately if is malfunction Unplug immediately if other foreign like no picture, no video/audio,smoke materials are put inside TV box or if and bad odor from TV. the TV fell down. Don't throw any object inside the TV box like metals or other flammable Prohibit/Avoid opening TV cabinet
Summary of the content on the page No. 7
Remember to unplug the AC cord Avoid direct sunlight, dusty, high from the AC outlet before cleaning. Do humidity and smoky areas. not use liquid cleaners or aerosol cleaners to clean the display. Make sure to unplug the unit when not Call service personnel to clean the in use for a long period of time (days). internal part of the TV once a year. Do not cover or block any vents and Do not place the display near water, openings. Inadequate ventilation may suc
Summary of the content on the page No. 8
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
Summary of the content on the page No. 9
18. Tilt/Stability – All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design. Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet, which could ultimately overturn the product. Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set an
Summary of the content on the page No. 10
Package Contents ◎AOC L42H861 TV unit ◎Remote Control ◎Two (AAA) Batteries for the Remote Control ◎Base ◎Four screws (to attach the Base to the stand) ◎Power Cord ◎User Manual ◎Quick Setup Guide IMPORTANT: Do not apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations. Attaching the Base IMPORTANT: The Base of the HDTV must be assembled prior to usage.
Summary of the content on the page No. 11
Preparing Your LCD HDTV for Wall Mounting We suggest that you keep your TV at least 2.36 inches (60 mm) from the wall to prevent cable interference. Before mounting your TV on the wall, you need to remove the base. To attach a wall mount bracket to your TV: 1 Remove the two T4 and two M4 screws holding your TV to the stand. 2 Secure the wall mount bracket to the back of your TV using four M6 screws, as indicated in the illustration.
Summary of the content on the page No. 12
PREPARATION Please, make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord! 1. Install the base stand; place the TV on a solid surface. Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to r
Summary of the content on the page No. 13
3. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V). 4. Power: Insert the power cord in the wall socket having an AC power supply. You can see LED states at the front panel. If the LED color is Blue, means the TV set is power on. If the LED color is Red, which means this TV set is in standby state. 5. Turn the TV on: Push the POWER key on the Remote control or the Front panel control knobs. Wait a minute, the TV will p
Summary of the content on the page No. 14
PERIPHERAL CONNECTION GUIDE HDMI S-Video Composite Pr Pb Y PC Audio in 15-pin D-Sub 1. HDMI – Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the TV indicates this connection. 2. RGB PC – Connect the video and audio cables from a computer here. 3. AV/S-VI
Summary of the content on the page No. 15
4. COMPONENT (YPb/CbPr/Cr with Audio L/R) – Connect the primary source for component video devices such as a DVD Player or set top box here. From left to right, use red for Pr, blue for Pb, green for Y, red for right audio (R) and white for left audio (L) inputs. 5. DTV – Connect to an antenna or digital cable (out-of-the-wall, not from Cable Box) for Digital TV.* 6. SPDIF (Optical Digital Audio Out) - When a digital audio signal is associated with the input selected for viewing, the
Summary of the content on the page No. 16
OPERATION INSTRUCTIONS TO USE THE FRONT PANEL CONTROL 1. VOL + VOL +: Press to increase the sound volume level. 2. VOL - VOL - : Press to decrease the sound volume level. 3. CH ▲ CH +: Press to select the next higher Program number. 4. CH ▼ CH - : Press to select the next lower Program number. 5. MENU Menu key: Press to open or exit the OSD menu. 6. INPUT Source key: Press to select the input source. Power key: Press to turn on / off (standby) the TV set. 7. POWER (Please
Summary of the content on the page No. 17
TO USE THE REMOTE CONTROL POWER PREV CH Press to power ON/OFF (standby) TV.(Note:1.TV is never completely Press to display the previous TV . power off. unless physically unplugged. MTS/SAP Press to activate the NTSC TV 2.Press to turn on TV after the power sounds, such as: Stereo, SAP or on status LED had changed to the Mono tone. And languages of DTV. red color and stopped flashing. ) WIDE VIDEO Press to choose the display aspect Press repeatedly to choo
Summary of the content on the page No. 18
VIEWING MODES ILLUSTRATIONS Normal Mode on 16:9 Display screen The original content would be at the center of the screen. Wide Mode on 16:9 Display screen The original content in this mode has to fill the entire width of the display horizontally. Wide Mode on 16:10 Display screen Wide1 and Wide2 are applied: Wide1: The original content would fill the full screen while the proper ratio of 16:9 content is still maintained. Little cropping of the content on the sides is nec
Summary of the content on the page No. 19
ZOOM Mode on 16:10 Display screen For those wide format images which are originally programmed into 4:3 frames with top and bottom black bars, this mode has to stretch the image in both wide and high directions to the full display with active data. Little cropping on sides is necessary for full display. 16:9 image in 4:3 frame Same image in ZOOM mode CINEMA Mode on 16:9 or 16:10 Display screen This mode is applied to view 2.35:1 format content on 16:9 displays. To crop
Summary of the content on the page No. 20
CONNECTING EQUIPMENT Coaxial (RF) Using Your Antenna or Digital Cable for DTV 1. Turn off the power to the HDTV. 2. Connect the coaxial (RF) connector from your antenna or digital cable (out-of-the-wall, not from the Cable Box) to the ANTENNA/CABLE DIGITAL/ANALOG connector. 3. Turn on the power to the HDTV. 4. Select DTV using the INPUT button on the remote, side of the HDTV or directly by pressing the TV button on the Remote Control. Using Your Antenna or Cable for TV
