Summary of the content on the page No. 1
Pub. 988-0143-881
www.eaglesonar.com
Mapping GPS Receiver
Installation and Operation
Instructions
Summary of the content on the page No. 2
Copyright © 2005 LEI-Eagle. All rights reserved. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Eagle Electronics. Any unauthorized commercial distribution of this manual is strictly prohibited. Eagle and IntelliMap are registered trademarks of LEI. MapCreate, FreedomMaps and NauticPath are trademarks of LEI. Fishing Hot Spots is a registered trademark of Fishing Hot Spots , Inc. LakeMaster P
Summary of the content on the page No. 3
Table of Contents Section 1: Read Me First!............................................................... 1 ® Capabilities and Specifications: IntelliMap 640c ............................ 2 How GPS Works ................................................................................. 4 Introduction to GPS and WAAS......................................................... 6 How to use this manual: typographical conventions ........................ 8 Arrow Keys....................................
Summary of the content on the page No. 4
Navigate to a Point of Interest......................................................... 46 Creating and Saving a Trail............................................................. 46 To Save a Trail .............................................................................. 47 Displaying a Saved Trail.................................................................. 48 To turn off trail display:................................................................ 48 To turn on trail display:.....
Summary of the content on the page No. 5
Waypoint Position ......................................................................... 66 Selecting a Waypoint .................................................................... 66 Set a Waypoint by Average Position ............................................ 66 Set a Waypoint by Projecting a Position...................................... 67 Section 5: System & GPS Setup Options.................................. 69 Alarms...................................................................
Summary of the content on the page No. 6
Screen Contrast and Brightness...................................................... 93 Set Language .................................................................................... 93 Set Local Time .................................................................................. 93 Show WAAS Alarm........................................................................... 94 Software Version Information.......................................................... 94 Sounds and Alarm Sound Sty
Summary of the content on the page No. 7
Section 1: Read Me First! How this manual can get you out on the road, fast! Welcome to the exciting world of digital GPS! We know you're anxious to begin navigating, but we have a favor to ask. Before you grab the ® IntelliMap 640c and begin installing it, please give us a moment or two to explain how our manual can help you get the best performance from your compact, wide-screen, mapping GPS receiver. First, we want to thank you for buying an Eagle GPS unit. Whether you're a first time user or
Summary of the content on the page No. 8
After you've learned the basics (or if you already have some GPS expe- rience), you may want to try out some of the IntelliMap 640c's many advanced navigation features. That brings us to Section 4, Advanced GPS Operations. This section contains the rest of the unit's GPS com- mand functions, organized in alphabetical order. When you come to a GPS menu command on the IntelliMap 640c's screen, you can look it up in the manual by skimming over the table of contents, just flipping through Section 3
Summary of the content on the page No. 9
Case size:......................... 5.4" H x 6.9" W x 3.4" D (13.8 x 17.6 x 8.6 cm); sealed and waterproof; suitable for saltwater use. MMC slots: ...................... One, with waterproof door (SD card compatible). Recording:........................MMC & SD cards for recording GPS trip de- tails and displaying charts or custom maps. Back-up memory: .......... Built-in memory stores GPS data for dec- ades. User settings are stored when unit is turned off. Languages:...................... 10; m
Summary of the content on the page No. 10
NOTE: The above memory capacities refer only to the IntelliMap 640c's on- board memory. The amount of GPS data you can record and save for recall later is limited only by the number and size of MMC cards you have. NOTICE! The storage temperature range for your IntelliMap 640c is from -4 degrees to +167 degrees Fahrenheit (-20 degrees to +75 degrees Celsius). Extended storage in temperatures higher or lower than specified will damage the liquid crystal display in your unit. This type of damage is
Summary of the content on the page No. 11
The background map is suitable for many navigation chores, but for maximum accuracy and much more detail, you need our optional map- making software, MapCreate 6, or one of our special plug-and-play mapping cards. Some unit features — such as searching for businesses and addresses — won't work without a custom MapCreate map. There is so much detail in our background map and even more in MapCreate that we'll describe their contents and differences in Section 3, Basic GPS Operations, on page 36.
Summary of the content on the page No. 12
Introduction to GPS and WAAS Well, now you know the basics of how the unit does its work. You might be ready to jump ahead to Section 2, Installation & Accessories, on page 11, so you can mount your IntelliMap 640c and plug in the power. Or you might want to see how our text formatting makes the manual tuto- rials easy to skim. If that's the case, move on to "How to Use This Man- ual" on page 8. But, if you want to understand the current state of sat- ellite navigation, look over this segment de
Summary of the content on the page No. 13
The system requires signal reception from three satellites in order to determine a position. This is called a 2D fix. It takes four satellites to determine both position and elevation (your height above sea level — also called altitude). This is called a 3D fix. Remember, the unit must have a clear view of the satellites in order to receive their signals. Unlike radio or television signals, GPS works at very high frequencies. These signals can be easily blocked by trees, buildings, an automobile
Summary of the content on the page No. 14
only a tool. Always have another method of navigation available, such as a map or chart and a compass. Also remember that this unit will always show navigation information in the shortest line from your present position to a waypoint, regardless of terrain! It only calculates position, it can’t know what’s between you and your destination, for example. It’s up to you to safely navigate around obstacles, no matter how you’re using this product. How to use this manual: typographical conventions Ma
Summary of the content on the page No. 15
4. The wait message disappears and the IntelliMap 640c begins show- ing navigation information along the trail. Now, begin moving and fol- low your IntelliMap 640c. Translated into complete English, step 1 above would mean: "Start on the Map Page. Press the Menu key twice. Next, repeatedly press (or press and hold) the down arrow key to scroll down the menu and select (highlight) the My Trails menu command. Finally, press the Enter key." Step 2 would mean: "Press the down arrow key repeatedly to
Summary of the content on the page No. 16
Notes 10
Summary of the content on the page No. 17
Section 2: Installation & Accessories Preparations You can install the GPS system in some other order if you prefer, but we recommend this installation sequence: Caution: You should read over this entire installation section before drill- ing any holes in your vehicle or vessel! 1. Determine the approximate location for the GPS unit, so you can plan how and where to route the cables for the antenna and power. This will help you make sure you have enough cable length for the de- sired configurati
Summary of the content on the page No. 18
You need to select an antenna installation location that has a clear, un- obstructed view of the sky. After the module is installed, route the cable to the unit, plug it in the center socket on the back and your system is ready to use. See the module's instruction sheet, publication part num- ber 988-0148-371, for complete installation directions. In an automobile, you may achieve good results by placing the external antenna on the top of the dash or at the base of the windshield. A piece of th
Summary of the content on the page No. 19
For example, if you have to extend the power cable to the battery or power buss, attach one end of the fuse holder directly to the battery or power buss. This will protect both the unit and the power cable in the event of a short. It uses a 3-amp fuse. To unit Optional power off switch for saltwater installations Red wire with 3 amp fuse Black wire 12 volt battery Power connections for the IntelliMap 640c GPS unit. WARNING: This product must be independently fused with the en- closed 3-amp fuse
Summary of the content on the page No. 20
Rear view of unit Power Connector GPS Connector NMEA 0183 Com Port Power cable 3-amp fuse Com port data wires (three) GPS antenna 12-volt battery module Cable connections. NMEA Cable Connections NMEA is a standard communications format for marine electronic equipment. For example, an autopilot can connect to the NMEA inter- face on the IntelliMap 640c and receive positioning information. The IntelliMap 640c can exchange information with any device that trans- mits or receives NMEA 0183 data. 14
