Summary of the content on the page No. 1
Pub. 988-0143-681
www.eaglesonar.com
IntelliMap 320
Mapping GPS Receiver
Installation and Operation
Instructions
Summary of the content on the page No. 2
Copyright © 2002 Eagle Electronics All rights reserved. ® Eagle is a registered trademark of Eagle Electronics Marine-Tex is a trademark of Illinois Tool Works Inc. Points of Interest Data in this unit are by infoUSA, copyright 2001-2002, All Rights Reserved. infoUSA is a trademark of infoUSA, Inc. eXitSource Database, copyright 2001-2002 Zenrin Co. Ltd. Exit Authority and eXitSource are trademarks of Zenrin Co. Ltd. Eagle Electronics may find it necessary to change or end our policies,
Summary of the content on the page No. 3
Table of Contents Section 1: Read Me First!.........................................................1 Capabilities and Specifications: IntelliMap 320 ...................... 2 How Eagle GPS Works ................................................................. 4 How To Use This Manual: Typographical Conventions.............. 8 Section 2: Installation & Accessories ..................................11 GPS Antenna/Receiver Module Installation.............................. 11 Power Connections....
Summary of the content on the page No. 4
Create Icon On Map................................................................ 54 Create Icon At Current Position ............................................ 54 Delete an Icon ......................................................................... 54 Navigate To an Icon................................................................ 55 Routes.......................................................................................... 55 Create and Save a Route ...............................
Summary of the content on the page No. 5
Map Datum Selection ................................................................. 77 Map Detail Category Selection................................................... 77 Map Orientation ......................................................................... 78 Navionics Charts....................................................................... 79 Pop-Up Help................................................................................ 85 Position Pinning..............................
Summary of the content on the page No. 6
WARNING! A CAREFUL NAVIGATOR NEVER RELIES ON ONLY ONE METHOD TO OBTAIN POSITION INFORMATION. CAUTION When showing navigation data to a position (waypoint), a GPS unit will show the shortest, most direct path to the waypoint. It provides navigation data to the waypoint regardless of obstructions. Therefore, the prudent navigator will not only take advantage of all available navigation tools when traveling to a waypoint, but will also visually check to make sure a clear, safe path to the waypoint
Summary of the content on the page No. 7
Section 1: Read Me First! How this manual can get you out on the road, fast! Welcome to the exciting world of digital GPS! We know you're anxious to begin navigating, but we have a favor to ask. Before you grab the IntelliMap 320 and begin installing it, please give us a moment or two to explain how our manual can help you get the best performance from your compact, wide-screen, mapping GPS receiver. First, we want to thank you for buying an Eagle GPS unit. Whether you're a first time user or a
Summary of the content on the page No. 8
Section 3 contains short, easy-to-scan GPS lessons that follow one an- other in chronological order. They're all you'll need to know to find your way on the water or in the wilderness quickly. After you've learned the basics (or if you already have some GPS expe- rience), you may want to try out some of the IntelliMap 320's many ad- vanced navigation features. That brings us to Section 4, Advanced GPS Operations. This section contains the rest of the unit's GPS command functions, organized in al
Summary of the content on the page No. 9
Input power:................... 10 to 15 volts DC. Case size:......................... 5.4" H x 6.9" W x 3.4" D (13.8 x 17.6 x 8.6 cm); sealed and waterproof; suitable for saltwater use. MMC slots: ...................... One with waterproof door (SD card compati- ble). Back-up memory: .......... Built-in memory stores sonar records and GPS data for decades. Languages:...................... 10; menu languages selectable by user. GPS Receiver/antenna:......... External; EGC-12w 12 parallel channel
Summary of the content on the page No. 10
NOTE: The above memory capacities refer only to the IntelliMap 320's on- board memory. The amount of GPS data you can record and save for recall later is only limited by the number of MMC cards you have. NOTICE! The storage temperature range for your IntelliMap 320 is from -4 de- grees to +167 degrees Fahrenheit (-20 degrees to +75 degrees Celsius). Extended storage in temperatures higher or lower than specified will damage the liquid crystal display in your unit. This type of damage is not cove
Summary of the content on the page No. 11
The background map is suitable for many navigation chores, but for maximum accuracy and much more detail, you need our optional map- making software, MapCreate 6. Some unit features — such as searching for businesses and addresses — won't work without a custom MapCreate map. There is so much detail in our background map (and even more in MapCreate) that we'll describe their contents and differ- ences in Section 6, Basic GPS Operations, on page 21. Another portion of the IntelliMap 320's onboard
Summary of the content on the page No. 12
Introduction to GPS and WAAS Well, now you know the basics of how the unit does its work. You might be ready to jump ahead to Section 2, Installation & Accessories, on page 11, so you can mount your IntelliMap 320 and plug in the power. Or you might want to see how our text formatting makes the manual tuto- rials easy to skim. If that's the case, move on to "How to Use This Man- ual" on page 8. But, if you want to understand the current state of sat- ellite navigation, look over this segment des
Summary of the content on the page No. 13
determine a position. This is called a 2D fix. It takes four satellites to determine both position and elevation (your height above sea level — also called altitude). This is called a 3D fix. Remember, the unit must have a clear view of the satellites in order to receive their signals. Unlike radio or television signals, GPS works at very high frequencies. These signals can be easily blocked by trees, buildings, an automobile roof, even your body. Like most GPS receivers, this unit doesn’t have
Summary of the content on the page No. 14
receiver is only a tool. Always have another method of navigation avail- able, such as a map or chart and a compass. Also remember that this unit will always show navigation information in the shortest line from your present position to a waypoint, regardless of terrain! It only calculates position, it can’t know what’s between you and your destination, for example. It’s up to you to safely navigate around obstacles, no matter how you’re using this product. How to use this manual: typographical
Summary of the content on the page No. 15
3. You are asked to wait while it converts the trail into a route. 4. The wait message disappears and the IntelliMap 320 begins showing navigation information along the trail. Now, begin moving and follow your IntelliMap 320. Translated into complete English, step 1 above would mean: "Start on the Map Page. Press the Menu key twice. Next, repeatedly press (or press and hold) the down arrow key to scroll down the menu and select (highlight) the My Trails menu command. Finally, press the Enter key
Summary of the content on the page No. 16
Notes 10
Summary of the content on the page No. 17
Section 2: Installation & Accessories Preparations You can install the GPS system in some other order if you prefer, but we recommend this installation sequence: Caution: You should read over this entire installation section before drill- ing any holes in your vehicle or vessel! 1. Determine the approximate location for the GPS unit, so you can plan how and where to route the cables for the antenna and power. This will help you make sure you have enough cable length for the de- sired configurati
Summary of the content on the page No. 18
You need to select an antenna installation location that has a clear, un- obstructed view of the sky. After the module is installed, route the cable to the unit, plug it in the center socket on the back and your system is ready to use. See the module's instruction sheet, publication part num- ber 988-0148-37, for complete installation directions. In an automobile, you may achieve good results by simply placing the external antenna on the top of the dash, at the base of the windshield. A piece of
Summary of the content on the page No. 19
For example, if you have to extend the power cable to the battery or power buss, attach one end of the fuse holder directly to the battery or power buss. This will protect both the unit and the power cable in the event of a short. It uses a 3-amp fuse. To unit Optional power off switch for saltwater installations Red wire with 3 amp fuse Black wire 12 volt battery Power connections for the IntelliMap 320 GPS unit. CAUTION: Do not use this product without a 3-amp fuse wired into the power cable!
Summary of the content on the page No. 20
Bracket Installation Mount the IntelliMap 320 in any convenient location, provided there is clearance behind the unit when it's tilted for the best viewing angle. You should also make sure there is enough room behind the IntelliMap 320 to attach the power and GPS antenna/receiver module cables. (A drawing on the next page shows the dimensions of a gimbal-mounted IntelliMap 320.) Holes in the bracket's base allow wood screw or through-bolt mounting. You may need to place a piece of plywood on the
