Summary of the content on the page No. 1
High Speed Laser Fax
Operating Instructions
Model No. KX-FL501AL
KX-FL501NZ
Please read these Operating Instructions
KX-FL501AL - for Australia
KX-FL501NZ - for New Zealand
before using the unit and save for future
reference.
Summary of the content on the page No. 2
Thank you for purchasing a Panasonic facsimile. For your future reference Date of purchase Serial number (found on the rear of the unit) Dealer’s name and address Dealer’s telephone number Caution: l Do not rub or use an eraser on the printed side of recording paper, as the print may smear. l KX-FL501AL is designed for the Australian network. l KX-FL501NZ is designed for the New Zealand network. Copyright: This manual is copyrighted by Kyushu Matsushita Electric Co., Ltd. (KME) and its licensee.
Summary of the content on the page No. 3
For Australian users Warning: l Please ensure that a separate telephone, not dependent on local power, is available for emergency use. l This equipment will be inoperable when mains power fails. l When a failure occurs which results in the internal parts becoming accessible,disconnect the power supply cord immediately and return this unit to an authorised service centre. l Disconnect the telephone connection before disconnecting power connection prior to relocating the equipment, and reconnect t
Summary of the content on the page No. 4
Important information (for Australian users)! Instructions to customer Installation Attached to this apparatus is an approval label. This label is evidence that it is a “Permitted Attachment” which has been authorised to be connected to your telephone service. Conditions relating to connection and operation of this Permitted Attachment are contained in Telecommunications General By-Law 220 (5). You are authorised to install this Permitted Attachment yourself by plugging it into the line socket
Summary of the content on the page No. 5
Safety instructions Important safety instructions! When using this unit, basic safety precautions 11. Never push any objects through slots in this should always be followed to reduce the risk of unit. This may result in the risk of fire or fire, electric shock, or personal injury. electric shock. Never spill any liquid on the 1. Read and understand all instructions. unit. 2. Follow all warnings and instructions marked 12. To reduce the risk of electric shock, do not on this unit. disassemble thi
Summary of the content on the page No. 6
Safety instructions CAUTION: Laser radiation Toner cartridge l The printer of this unit utilises a laser. Use l Be careful of the following when you handle of controls or adjustments or performance the toner cartridge. of procedures other than those specified —If you ingest any toner, drink several herein may result in hazardous radiation glasses of water to dilute your stomach exposure. contents, and seek immediate medical treatment. —If any toner comes into contact with your eyes, flush them t
Summary of the content on the page No. 7
Safety instructions CAUTION: OTHER INFORMATION: Installation l Keep the unit away from electrical noise l Never install telephone wiring during a generating devices, such as fluorescent lightning storm. lamps and motors. l Never install telephone jacks in wet l The unit should be kept free from dust, high locations unless the jack is specifically temperature and vibration. designed for wet locations. l The unit should not be exposed to direct l Never touch uninsulated telephone wires or sunligh
Summary of the content on the page No. 8
Table of Contents Initial Preparation Accessories Included accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Accessory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Help Button Help function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Finding the Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Controls Location . . . . . . .
Summary of the content on the page No. 9
Copy Copying Making a copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Convenient way to make a copy . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Programmable Features Features Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Summary Basic features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Advanced features. . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 10
Accessories Included accessories! Power cord .......................1 Telephone line cord ..........1 Handset............................1 Handset cord....................1 Paper stacker ...................1 Document stacker ............1 Paper tray.........................1 Telephone plug..................1 Operating Instructions.......1 (KX-FL501AL only) Quick Start Sheet.............1 Drum unit..........................1 Toner cartridge..................1 (complementary starter toner cartrid
Summary of the content on the page No. 11
Help Button Help function! You can print a quick reference for assistance as follows. Press HELP . HELP Display 1 ROTATE & SET Display: Rotate until the desired item is EASY DIAL 2 displayed. 1. How to set the date, time, your logo and fax number. QUICK SET UP 2. How to program the features. EASY DIAL SET FEATURE LIST 3. How to store names in the EASY DIAL directory and how to dial them. EASY DIAL 4. Help with problems receiving faxes. FAX RECEIVING 5. How to use the copier function. COPIER 6
Summary of the content on the page No. 12
Finding the Controls Overview! Document guides Handset ● To make or answer calls Paper tray Speaker (Left side of the unit) Recording paper entrance Front cover Document entrance Document stacker Front cover open button Document exit Recording paper exit Paper stacker extender Paper stacker *The document stacker and paper stacker may not be shown in all illustrations. 12
Summary of the content on the page No. 13
Finding the Controls Location! l To store a scanned document into l To turn on/off AUTO ANSWER (p. 42, 43). memory, and then send it (p. 34). l l To make a collated copy (p. 55). To adjust volumes (p. 23). l To select an enlargement or l To use ONE-TOUCH DIAL (p. 24, 28, 35). reduction rate in copy mode l To transmit to multiple stations (p. 38, 41). (p. 55). l To print a quick reference (p. 11). l To select a resolution (p. 34, 54). Dial keypad Display QUICK SCAN START MANUAL BROAD R RE EC
Summary of the content on the page No. 14
Setup Toner cartridge and drum unit! Caution: l Read the instructions below before you begin installation. After you have read them, open the drum unit protection bag. The drum unit contains a photosensitive drum. Exposing it to light may damage the drum. Once you have opened the protection bag: —Do not expose the drum unit to light for more than 5 minutes. —Do not touch or scratch the green drum surface. —Do not place the drum unit near dust or dirt, or in a high humidity area. —Do not expose t
Summary of the content on the page No. 15
Setup The toner cartridge is installed when 5 the triangles match. Triangles Tap on the toner cartridge several 6 times to allow the toner to fall into the drum unit. Grab the tabs, and shake Toner cartridge the drum and toner unit horizontally several times. Tabs Push the front cover open button then Front cover 7 open the front cover. Front cover open button Install the drum and toner unit by 8 holding the tabs. Drum and toner unit l If the lower glass is dirty, clean it with a soft dry clot
Summary of the content on the page No. 16
Setup Paper tray, document stacker and paper stacker! Paper tray Insert the paper tray into the two slots on the Paper tray back of the unit ( ). 1 Let it lean back until it clicks into place ( ). 2 2 1 Document stacker Align with the ribs on the document exit ( ). 1 Pull the document stacker forward gently until it 2 clicks into place ( ). 2 Document exit Document stacker 1 Ribs Paper stacker Pegs Line up the slots in the paper stacker with the pegs on the bottom of the unit, then slide until
Summary of the content on the page No. 17
Setup Recording paper! 2 2 A4 size recording paper can be loaded. The unit can hold up to 150 sheets of 60 g/m to 75 g/m 2 paper or 120 sheets of 90 g/m paper. Fan the stack of paper to prevent a paper 1 jam. Insert the paper into the recording paper Printing side is back. 2 entrance. l The paper should not be over the tab. Recording l If the paper is not inserted correctly, paper readjust the paper, or the paper may jam. entrance Correct Incorrect Stack of paper Tab Note for recording paper
Summary of the content on the page No. 18
Setup Connections! Connect the handset cord. 1 Connect the telephone line cord. 2 Connect the power cord. 3 l When the power is turned on for the first time, the unit will print some basic information. Power cord To a power outlet (220–240 V, 50/60 Hz) n KX-FL501AL users Connect to “LINE . To the single Handset cord telephone line Telephone line cord Telephone plug (KX-FL501AL only) n KX-FL501NZ users To the single telephone line Caution: l When you operate this product, the power outlet s
Summary of the content on the page No. 19
Setup Date and time, your logo and facsimile telephone number! You should program the date and time, your logo and facsimile telephone number. This information will be printed on each page transmitted from your unit. Your logo Your facsimile telephone number Date and time Example: FROM :Panasonic Fax FAX NO. :1234567 Feb. 26 2001 09:02AM P1 Fax Correspondence Setting the date and time Press MENU . Press SET . 1 7 Display: SYSTEM SET UP SETUP ITEM [ ] Press , then 0 1 . Press MENU . 2 8 SET DAT
Summary of the content on the page No. 20
Setup Setting your logo The logo can be your company, division or name. Display MENU / MENU Press . 1 Display: SYSTEM SET UP Press , then 0 2. 2 YOUR LOGO Press . SET 3 LOGO= RECALL EASY DIAL SET (Hyphen) Enter your logo, up to 30 characters, using HANDSET MUTE STOP 4 the dial keypad. See the next page for details. (Insert) (Delete) Example: “Bill” 2 1.Press twice. LOGO=B To change capital or lower case letters Cursor Pressing the key will change to capital or 2.Press six 4 times. lower case alt
