Summary of the content on the page No. 1
ES
USER’S GUIDE
Please keep all information for future reference.
Safety Precautions
Before trying to use the Digital Keyboard, be sure to
read the separate “Safety Precautions”.
GUÍA DEL USUARIO
Guarde toda la información para futuras consultas.
Precauciones de seguridad
Antes de intentar usar el teclado digital, asegúrese de
leer las “Precauciones de seguridad” separadas.
CTK4200/WK220-ES1B
Español English
Summary of the content on the page No. 2
NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that inter
Summary of the content on the page No. 3
Important! Please note the following important information before using this product. � Before using the optional AC Adaptor to power the unit, be sure to check the AC Adaptor for any damage first. Carefully check the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is seriously damaged. � Never attempt to recharge batteries. � Do not use rechargeable batteries. � Never mix old batteries with new ones. � Use recommended batteries o
Summary of the content on the page No. 4
Contents General Guide ..................................E-4 Using Built-in Songs to Master Keyboard Play................................ E-31 Using the 10-key Pad ( ).................................E-7 br FUNCTION Button ( ) Functions ....................E-7 Phrases............................................................ E-31 ct Returning the Digital Keyboard to Its Step Up Lesson Flow....................................... E-31 Factory Default Settings ...................................
Summary of the content on the page No. 5
Contents Other Useful Digital Keyboard Functions........................................E-55 Changing the Scale of the Keyboard................E-55 Using Music Preset ..........................................E-56 Using the Arpeggiator.......................................E-57 Deleting User Song Data..................................E-58 Deleting All Data in Digital Keyboard Memory ............................................................E-58 Connecting External Devices .......E-59 Connect
Summary of the content on the page No. 6
General Guide � In this manual, the term “Digital Keyboard” refers to the CTK-4200/WK-220/WK-225. � Illustrations in this User’s Guide show the WK-220. • In this manual, buttons and other controllers are identified using the numbers shown below. � There is a button number reference at the back of this manual. You can tear it out and refer to the button numbers as required. 1 1 2 2 3 34 4 5 5 6 6 7 7 8 8 9 9 bk bk bl bl bm bm bq bqbp bpbo bo bn bn br br bs bs bt bt ck ck cl cl cm cm cn cn co co
Summary of the content on the page No. 7
General Guide � The following explains the meaning of the $ symbol that appears on the product console and with the key names below. $ : Indicates a function that is enabled by holding down the button for some time. POWER button ☞E-10 Area1, WATCH button ☞E-33, 48 1 bt VOLUME knob ☞E-10 Area2, REMEMBER button ☞E-34, 48 2 ck RECORDER button ☞E-50 Area3, NEXT button ☞E-32, 48 3 cl RHYTHM EDITOR button ☞E-45 Area4, AUTO button ☞E-36, 48 4 cm METRONOME, $ BEAT button ☞E-13 STORE, MUSIC CHALLENGE but
Summary of the content on the page No. 8
General Guide ■ Back ds dt ek el em en eo USB port ☞E-59 AUDIO IN jack ☞E-19 ds em SUSTAIN/ASSIGNABLE JACK ☞E-17 DC 9.5V terminal ☞E-9 dt en MIC VOLUME knob PHONES/OUTPUT jack ☞E-11 ek eo (WK-220 and WK-225) ☞E-19 MIC IN/SAMPLING jack el (WK-220 and WK-225) ☞E-19 E-6
Summary of the content on the page No. 9
General Guide Using the 10-key Pad ( ) FUNCTION Button ( ) Functions br ct Use the number buttons and the [–] and [+] keys to change You can use the FUNCTION button ( ) to adjust the reverb ct the settings of the parameters that appear in the upper left effect, to delete data, and to perform a wide range of other area of the display. Digital Keyboard operations. To select a function 1. Press (FUNCTION) to display the function ct menu. 2. Use the (10-key) [4] (o) and [6] (p) keys br to disp
Summary of the content on the page No. 10
General Guide See Function Display Returning the Digital Keyboard to Page Its Factory Default Settings 1 Transpose Trans. E-17 2 Accompaniment Volume AcompVol E-42 Perform the following procedure when you want to return the 3 Song Volume Song Vol E-30 Digital Keyboard’s stored data and settings to their initial factory defaults. 4 Touch Response Touch E-12 5 Tuning Tune E-17 1. Turn off the Digital Keyboard. 6 Reverb Reverb E-16 7 Chorus Chorus E-16 2. While holding down (SONG BANK) and the
Summary of the content on the page No. 11
Getting Ready to Play Using Batteries Preparing the Music Stand � Be sure to turn off power before loading batteries. Music stand � It is up to you to prepare six commercially available batteries. Do not use oxyride batteries or any other nickel based batteries. 1. Open the battery cover on the bottom of the Digital Keyboard. Power Supply Either an AC adaptor or batteries can be used to power this Digital Keyboard. Normally, use of AC adaptor power is recommended.
Summary of the content on the page No. 12
Playing the Digital Keyboard 1 1 2 2 5 5 bn bn br br bm bm ct ct Auto Power Off Turning on Power and Playing If you do not perform any operation on the Digital Keyboard 1. Press . for one of the trigger times noted below, Auto Power Off will 1 This turns on power. turn off power. � To turn off the Digital Keyboard, press again. During battery operation : 6 minutes 1 During AC adaptor operation : 30 minutes 2. Try playing something on the keyboard. Use 2 ■ Disabling Auto Power Off to adjust
Summary of the content on the page No. 13
Playing the Digital Keyboard Using Headphones Connecting a Microphone (WK-220 and WK-225) Using headphones cuts off output from the built-in speakers, which means you can practice playing even late at night You can connect a dynamic microphone (only) to the Digital without disturbing others. Keyboard for output through the Digital Keyboard’s speakers. � Be sure to turn down the volume level before connecting � You can adjust the volume level of microphone input with headphones. the (MIC V
Summary of the content on the page No. 14
Playing the Digital Keyboard Changing Keyboard Response to Adjusting Display Contrast Touch Pressure 1. Press (FUNCTION) and then use the ct br (Touch Response) (10-key) [4] (o) and [6] (p) keys to display “OTHER” (page E-7). Touch Response alters tone volume in accordance with keyboard pressure (speed). This provides you some of the Flashes same expressivity you get on an acoustic piano. OT HER Pressing fast produces louder notes. 2. Press (10-key) [9] (ENTER) key. br 3. Use the (10-k
Summary of the content on the page No. 15
Playing the Digital Keyboard Changing the Metronome Tempo Using the Metronome Use the following procedure to change the tempo of the The metronome lets you play and practice along with a steady metronome. beat to help keep you on tempo. 1. Press . bm Start/Stop Use y (slower) and t (faster) to change the tempo setting. Holding down either button changes the setting at 1. Press . 5 high speed. This starts the metronome. � Pressing t and y at the same time will initialize the tempo setting in
Summary of the content on the page No. 16
Controlling the Keyboard Sounds bn bn br br co cocp cp cr cr ct ct 3. Try playing something on the keyboard. Select from a variety of musical The tone of the instrument you selected will sound. instrument sounds Your Digital Keyboard lets you select tones for a wide variety of musical instrument sounds, including violin, flute, orchestra, and more. Even the same song sound takes on a different feel by changing the instrument type. To select an instrument for playing 1. Press (TONE). bn Play
Summary of the content on the page No. 17
Controlling the Keyboard Sounds Layering Two Tones Splitting the Keyboard between Two Different Tones You can use the following procedure to layer two different tones (such as piano and strings) so they sound You can use the procedure below to assign different tones to simultaneously when you press a keyboard key. the right range and left range of the keyboard, so it sounds like you are playing an ensemble between two instruments. 1. Select the first tone you want to use. Press (TONE) and
Summary of the content on the page No. 18
Controlling the Keyboard Sounds 5. Pressing again to unsplit the keyboard (so it co Using Chorus plays only the tone you selected in step 1). � Each press of toggles between split (two tones) and Chorus is a function that adds depth and breadth to notes. It co unsplit (one tone). makes you sound as if you are playing multiple instruments. 1. Press (FUNCTION) and then use the ct br (10-key) [4] (o) and [6] (p) keys to display � If you turn on both layer and split, layering will be applied
Summary of the content on the page No. 19
Controlling the Keyboard Sounds Using a Pedal Changing the Pitch (Transpose, Tuning, Octave Shift) A pedal can be used to change notes in various ways while playing. � A pedal unit does not come with the Digital Keyboard. Changing the Pitch in Semitone Steps Purchase one separately from your retailer. See page E-3 (Transpose) for information about options. The transpose feature lets you change the pitch, in semitone Connecting a Pedal Unit steps. A simple operation lets you instantly chang
Summary of the content on the page No. 20
Controlling the Keyboard Sounds Octave Shift Octave Shift lets you raise or lower the pitch of the keyboard notes in octave units. � The octave shift setting range is –2 to +2 octaves. � When using Split (page E-15), you can individually set the left and right keyboard ranges to the pitches you want. 1. Keep pressing until the screen shown below cp appears on the display. If you want to use Split, turn on Split before pressing . cp � If you do not perform any operation for a few seconds aft
