Summary of the content on the page No. 1
Summary of the content on the page No. 2
© Copyright 2004 Compex Systems Pte Ltd All Rights Reserved This document contains information, which is protected by copyright. Reproduction, adaptation or translation without prior permission is prohibited, except as allowed under the copyright laws. Trademark Information ® ® ® Compex , ReadyLINK and MicroHub are registered trademarks of Compex, Inc. Microsoft Windows and the Windows logo are the trademarks of Microsoft Corp. NetWare is the registered trademark of Novell Inc. A
Summary of the content on the page No. 3
FCC NOTICE This device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that i
Summary of the content on the page No. 4
Therefore, this product is in conformity with the following regional standards: FCC Class A following the provisions of FCC Part 15 directive; CE Mark following the provisions of the EC directive. This Class A digital apparatus complies with Canadian ICES-003. iii
Summary of the content on the page No. 5
Technical Support Information The warranty information and registration form are found in the Quick Install Guide. For technical support, you may contact Compex or its subsidiaries. For your convenience, you may also seek technical assistance from the local distributor, or from the authorized dealer/reseller that you have purchased this product from. For technical support by email, write to support@compex.com.sg. Refer to the table below for the nearest Technical Support Centers:
Summary of the content on the page No. 6
About This Document The product described in this document, Compex Web Management Switch Series, Compex SGX3226 is a licensed product of Compex Systems Pte Ltd. This document contains instructions for installing, configuring and using Compex SGX3226. It also gives an overview of the key applications and the networking concepts with respect to the product. This documentation is for both Network Administrators and the end user who possesses some basic knowledge in the networking struct
Summary of the content on the page No. 7
References on Menu Command, Push Button, Radio Button, LED and Label appear in Bold. For example, Click on the Ok button vi
Summary of the content on the page No. 8
Table of Contents Copyrights © 2004 Compex Systems Pte Ltd ..................................................................................i Trademark Information.....................................................................................................................i Disclaimer ........................................................................................................................................i Your Feedback.................................................
Summary of the content on the page No. 9
Table of Contents Chapter 5 Web-based Interface Configuration for Compex SGX3226 .............. 19 5.1 Port Configuration................................................................................................................19 5.2 VLAN Configuration ...........................................................................................................21 5.3 Trunk Configuration......................................................................................................
Summary of the content on the page No. 10
Table of Contents Chapter 8 Using SYSTEM TOOLS Menu ............................................................ 58 8.1 Set System Clock .................................................................................................................58 8.2 Remote Management............................................................................................................59 8.3 System Configuration.....................................................................................
Summary of the content on the page No. 11
Chapter 1 Product Overview Chapter 1 Product Overview 1.1 Introduction Compex Managed Switch Series Compex SGX3226 is a 24-port 10/100Mbps Fast Ethernet SNMP Managed Switch with Integrated Router, which comes with 2 expansion slots to support 1000 Base-T Gigabit Copper Modules for uplink connection. All 24 auto-sensing ports, which have the abilities to support full and half duplex transmission, are on independent switching segment. Compex SGX3226 is specially designed to suppor
Summary of the content on the page No. 12
Chapter 1 Product Overview • Port Trunking Up to 4 ports may be defined for Port Trunking, delivering up to 800Mbps cascading bandwidth between two switches. • VLAN support and tagging Compex SGX3226 can support up to 32 port-based VLANs and static configuration of 802.1Q VLAN tagging. It allows network administrator to separate the network into a few segments by defining which port belong to which VLAN segment. This can effectively control broadcast and multi-cast packet flooding t
Summary of the content on the page No. 13
Chapter 1 Product Overview 1.3 Network Applications Compex SGX3226 may be used in the backbone with ADSL broadband connection as the access to the Internet. Virtual LAN may be defined on Compex SGX3226 to logically segmenting your LAN into multiple broadcast domains with workgroup classifications. SGX3226 SNMP Manager High Bandwidth Servers Internet Servers User groups on Private LAN Switching SXP1226WM Figure 1.2 Compex SGX3226 in the backbone 3
Summary of the content on the page No. 14
Chapter 1 Product Overview 4
Summary of the content on the page No. 15
Chapter 1 Product Overview Optional modules may be installed on Compex SGX3226 to support inter-building connectivity using fiber optical cables. Building A Gigabit Ethernet on Fiber (1000 Base-SX) or Fast Ethernet on Fiber (100 Base-FX) Building C Building B Figure 1.3 Compex SGX3226 installed with optional fiber optic module 5
Summary of the content on the page No. 16
Chapter 2 Getting Started Chapter 2 Getting Started This chapter outlines the basic requirement for any installation and configuration of Compex SGX3226. 2.1 Packaging Content Thank you for purchasing the Compex Web Managed Switch SGX3226. You will find the following items in the package: Please note that the actual product appearance may slightly differ depending on the hardware version. 1 x Compex SGX3226 unit 2 x brackets 6 x screws 1 x RS232 straight cabl
Summary of the content on the page No. 17
Chapter 2 Getting Started 2.2 Setup Considerations Prepare checklist before you start: • Check your Local Area Network configurations. Check if the network has Static IP addressing or dynamic IP assignment. • Check whether any of the browsers (Netscape Navigator, Netscape Communicator or Microsoft Internet Explorer) is installed in your PC. 2.2.1 Software Requirements • Windows 95/98/98SE/2000/NT/ME/XP • Any other TCP/IP-enabled systems like Mac OS and UNIX • Hyper Terminal Progr
Summary of the content on the page No. 18
Chapter 3 Hardware Installation Chapter 3 Hardware Installation This chapter gives an in-sight on the hardware installation aspect from installing the physical cables to resetting the device. 3.1 Physical Setup for Compex SGX3226 Compex SGX3226 is ideally suitable for office environment usage, which can be either installed on a flat surface (desktop) or mounted on a 19-inch rack. The following steps illustrate how a proper installation has to be done. 3.1.1 Desktop Installation
Summary of the content on the page No. 19
Chapter 3 Hardware Installation 3. Connect the power cord to the power socket on the rear panel of Compex SGX3226. NOTE For proper ventilation, do allow about at least 4 inches of clearance on the front and 4 inches on the back of the Switch. This is especially important for enclosed rack installation. 3.1.3 Expansion Module Installation A series of optional expansion modules are available for Compex SGX3226 to enhance the features. As Compex SGX3226 supports the hot plug f
Summary of the content on the page No. 20
Chapter 3 Hardware Installation 3.2 Connecting Your modem to Compex SGX3226 Connect one end of the modem cable to any port of Compex SGX3226. The other end of the modem cable is to be connected to your own ADSL/Cable modem. (Set up the modem for dial-up connection. You may need to refer to your respective modems manual for installation.) NOTE Connect Compex SGX3226 using one modem first. Once you have established an Internet connection, then add the additional modem as and when you
