Summary of the content on the page No. 1
ES
USER’S GUIDE
GUÍA DEL USUARIO
Please keep all information for future reference.
Guarde toda información para tener como referencia futura.
Safety Precautions
Before trying to use the piano, be sure to read
the separate “Safety Precautions”.
Precauciones de seguridad
Antes de intentar usar el piano, asegúrese de
leer las “Precauciones de seguridad” separadas.
PX730/7ES1A
Español English
Summary of the content on the page No. 2
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other appar
Summary of the content on the page No. 3
Contents Assembling the Stand............................................................................................... E-27 Unpacking................................................................. E-27 To connect the cable................................................. E-32 Assembling the Stand............................................... E-27 To install the music stand..........................................E-32 General Guide ................................... E-2 Configuring Set
Summary of the content on the page No. 4
General Guide Bottom 12 3 4 Rear Front 5 6 bn 7 8 9 bo bk bl bm E-2
Summary of the content on the page No. 5
General Guide *CAUTION • Make sure that the cover is fully open whenever you are playing on the keyboard. A partially open cover can suddenly close unexpectedly and pinch your fingers. NOTE � The names shown here are always indicated in bold when they appear within the text of this manual. Pedal connector RECORDER (L) button USB port METRONOME (R) button DC 12V terminal GRAND PIANO (MODERN) button PHONES jacks GRAND PIANO (CLASSIC) button VOLUME controller ELEC PIANO butt
Summary of the content on the page No. 6
Power Outlet Your digital piano runs on standard household power. Be sure to turn off power whenever you are not using the digital piano. Using an AC Adaptor Use only the AC adaptor (JEITA Standard, with unified polarity plug) that comes with this digital piano. Use of a different type of AC adaptor can cause malfunction of the digital piano. Specified AC Adaptor: AD-A12150LW � Use the supplied power cord to connect the AC adaptor as shown in the illustration below. DC 12V terminal Househo
Summary of the content on the page No. 7
Connections IMPORTANT! To either of the digital piano’s PHONES jack � Whenever connecting something to the digital piano, Pin plug Audio amplifier AUX IN jack, etc. first use the VOLUME controller to set the volume to RIGHT (Red) a low level. After connecting, you can adjust the LEFT (White) volume to the level you want. Stereo standard plug Guitar amplifier Keyboard amplifier, etc. Pin plug (white) Connecting Headphones INPUT 1 INPUT 2 Pin plug (red) Bottom PHONES jacks Pin jack Standard plu
Summary of the content on the page No. 8
Playing with Different Tones VOLUME FUNCTION SONG a POWER METRONOME GRAND PIANO ELEC PIANO Selecting and Playing a Tone The piano comes with 16 built-in tones. * The names of the tones are marked above the keyboard keys to which they are assigned. To select a tone 1. Press the POWER button. IMPORTANT! � When you turn on the digital piano, it performs a power up operation in order to initialize its system. During system initialization the tone button lamps cycle on and off in the sequence for ab
Summary of the content on the page No. 9
Playing with Different Tones 3. Use the VOLUME controller to adjust the To adjust the brilliance of a volume. tone NOTE 1. While holding down the FUNCTION button, � GRAND PIANO tones (MODERN, CLASSIC) use the BRILLIANCE keys to specify a Your digital piano has a total of 16 built-in tones. The MODERN and CLASSIC tones are stereo brilliance value in the range of –3 to 0 to 3. sampled tones that can be selected using the GRAND PIANO buttons. Try using the GRAND PIANO tones to familiarize y
Summary of the content on the page No. 10
Playing with Different Tones To adjust the volume balance between Layering Two Tones two layered tones Use the following procedure to layer two tones, so they sound at the same time. 1. While holding down the FUNCTION button, When specifying two tones for layering, first tone you use the keyboard keys shown below to adjust select will be the main tone, while the second tone will the volume of the layered tones. be the layered tone. 1. While holding down the FUNCTION button, hold down the
Summary of the content on the page No. 11
Playing with Different Tones ■ About DSP Using Effects DSP makes it possible to digitally produce complex acoustic effects. The DSP is assigned to each tone Reverb : Makes your notes resonate. whenever you turn on digital piano power. Chorus : Adds more breadth to your notes. To turn reverb on and off Using the Digital Piano’s Pedals 1. While holding down the FUNCTION button, press the MODERN button to toggle reverb Your digital piano comes equipped with three pedals: damper, soft, and sost
Summary of the content on the page No. 12
Playing with Different Tones 4. Press the METRONOME button or SONG Using the Metronome a button to turn off the metronome. 1. Press the METRONOME button. NOTE � This starts the metronome. � To return the tempo setting to the default tempo of � The lamp above the SONG a button flash in time the currently selected Music Library tune, press the with the metronome beat. + and – keys at the same time in step 3. Pressing + and – while recording will return the tempo value to 2. To change the bea
Summary of the content on the page No. 13
Playing with Different Tones Changing the Octaves of the duet Playing a Piano Duet keyboards You can use the Duet Mode to split the piano’s You can change the ranges of the left and right keyboard in the center so two people can play a duet. keyboards in octave units from their initial default Keyboard settings. This comes in handy, for example, if the initial Split point default range is not enough when one person is Left keyboard Right keyboard playing the left hand part and another per
Summary of the content on the page No. 14
Playing Back Built-in Songs FUNCTION SONG a RECORDER METRONOME Your digital piano comes with a Music Library of 60 Playing Back a Specific Music built-in tunes. You can play all 60 tunes in sequence, from beginning to end. Library Song The Music Library includes both built-in songs (01 to IMPORTANT! 60), plus one song (61) that have been saved to digital � After you select a built-in song, it can take a number piano memory from a computer*. You can use the of seconds for the song data to
Summary of the content on the page No. 15
Playing Back Built-in Songs 4. To stop playback, press the SONG a button again. � Playback will stop automatically when the end of the song is reached. NOTE � Pressing the + and – keys at the same time will select song number 01. � You also can adjust the playback tempo and volume of the song. See “Configuring Settings with the Keyboard” on page E-18 for more information. Practicing with a Music Library Song You can turn off the left hand part or right hand part of a song and play along o
Summary of the content on the page No. 16
Recording and Play Back FUNCTION SONG a RECORDER METRONOME You can store the notes you play in digital piano Recording Data Storage memory for later playback. � Starting a new recording deletes any data that was previously recorded in memory. � Should power fail during recording, all of the data in Tracks the track you are recording will be deleted. A track is a container of recorded data, and a song IMPORTANT! consists of two tracks: Track 1 and Track 2. You can record each track separatel
Summary of the content on the page No. 17
Recording and Play Back 4. Start playing something on the keyboard. To record to a specific track of � Recording will start automatically. a song 5. To stop recording, press the SONG a After recording to either of the tracks of a song, you can button. record to the other track while listening to playback � This will cause the RECORDER button lamp and the what you recorded in the first track. lamp of the track you recorded to change from flashing to lit. 1. Press the RECORDER button twice s
Summary of the content on the page No. 18
Recording and Play Back To record to one track of a Playing Back from Digital song while listening to the Piano Memory playback of the other track 1. Press the RECORDER button so its lamp is lit. 1. Press the RECORDER button so its lamp is lit. NOTE � When a song has something recorded in both tracks, 2. While holding down the FUNCTION button, you can turn off one track and play back just the press the RECORDER (L) button or other track, if you want. METRONOME (R) button to select the tra
Summary of the content on the page No. 19
Recording and Play Back Deleting Recorded Data The following procedure deletes a specific track of a song. IMPORTANT! � The procedure below deletes all of the data of the selected track. Note that the delete operation cannot be undone. Check to make sure you really do not need the data in digital piano memory before you perform the following steps. 1. Press the RECORDER button twice so its lamp is flashing. 2. While holding down the FUNCTION button, press the RECORDER (L) button or METRO
Summary of the content on the page No. 20
Configuring Settings with the Keyboard FUNCTION In addition to selecting tones and Music Library tunes, 4. Release the FUNCTION button to complete you also can use the FUNCTION button in the setting procedure. combination with the keyboard keys to configure effect, keyboard touch, and other settings. NOTE � You can configure the digital piano so no operation tone sounds in step 3. For details, see “ Operation To configure settings with the tone” under “Parameter List” on pages E-20 - E
