Summary of the content on the page No. 1
Summary of the content on the page No. 2
SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the pres- ence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The ex
Summary of the content on the page No. 3
TABLE OF CONTENTS INTRO INTRODUCTION 2P REMOTE CONTROLLER 3P FRONT PANEL 4P REAR PANEL 5~6P OPERATION OSD 8P DISPLAY / SEQUENCE 9P PRIVACY / MUTE / AUDIO 10P RECORD 11P SEARCH 12~14P BACKUP 14P PTZ 15~16P RS-232 / ALARM 17~18P REMOTE VIEWER 19~22P SETUP MENU DIAGRAM 23P 1. BASIC SETTING RECORDING SCHEDULE 25P CAMERA REGISTRATION 26P AUDIO 26P HDD 27P PRE-POST RECORDING 27P 2. INTERNET & NETWORK NETWORK CONNECTION 28P SERVICE PORT & DDNS 28P UPDATE SERVER 29P 3. DISPLAY ADJUSTMENT 30P OSD 30P SEQ
Summary of the content on the page No. 4
AI A.I. D DV VR is an ideal cost-effective CCTV solution for smallscale surveillance systems. Easy to install and use, the A.I. DVR performs 5 actions simultaneously. - Monitors 8 or 16 cameras - Records video in MPEG-4 format with audio - Control sensor & alarm functions - Advanced search - Transmits data over the network Sophisticated search functions help the user easily find a desirable record. A.I. DVR can control PTZ cameras through the 485 serial ports. And A.I. DVR can control sen
Summary of the content on the page No. 5
User’s Remote Power Cord DVR Battery Manual Controller (110V or 220V) DVR User’s Manual Remote Controller Power Cord Battery NOTICE If anything is missing from the package, please notify the shop you purchased DVR from. MODE1 - Ch1 Audio On/Off MODE2 - Ch2 Audio On/Off PANIC RECORDING - Emergency recording ID - Select DVR ID LIVE/SEARCH PLAYBACK CONTROL - Change Live/Search Mode - Search videos OSD - OSD On/Off SEQUENCE - Sequence On/Off MUTE - Sound On/Off MENU - Enter/Exit the
Summary of the content on the page No. 6
RECORDING - Start / Stop recording manually DISPLAY - Change screen mode SEQUENCE - Sequence On/Off OSD - OSD On/Off MUTE - Sound On/Off EJECT - Eject a CD from CD-ROM LED - Power/HDD/CD-RW/Network SEARCH MODE CONTROL - Playback recorded data LIVE/SEARCH - Change Live/Search Mode MENU - Enter/Exit the setup menu or sub-menu DIRECTION BUTTONS - Move cursor ENTER - Confirm selection or Setting REMOTE CONTROLLER SIGNAL RECEIVER NUMBER BUTTONS - Input numbers or Channel FUNCTION/BACKSPACE - En
Summary of the content on the page No. 7
AUDIO/MIC VI VI VI VI VI VI VIDEO OUT IDE DE DE DE DE DEO O O O O OU OU OU OU OU OUT ALARM IN & OUT RESET RS-485 CAMERA × 8 RS-232 CAMERA CONNECTION NNECTION POWER CONNECTION & POWER SWITCH USB MOUSE NETWORK VGA MONITOR Camera Connection Connect the CCD cameras to VIDEO IN on the rear panel of the DVR. Audio connection Connect a microphone to AUDIO IN 1 & 2 and speaker to AUDIO OUT on the rear panel of DVR. Audio input and output should be amplified, since the DVR does not have a
Summary of the content on the page No. 8
VIDEO OUT VI VIDE DEO O OU OU ALARM IN & OUT RESET CAMERA × 16 RS-232 CAMERA CONNECTION RS-485 85 POWER CONNECTION & POWER SWITCH USB MOUSE VGA MONITOR NETWORK AUDIO/MIC Camera Connection Connect the CCD cameras to VIDEO IN on the rear panel of the DVR. Audio connection Connect a microphone to AUDIO IN 1 & 2 and speaker to AUDIO OUT on the rear panel of DVR. Audio input and output should be amplified, since the DVR does not have an embedded amplifier. VGA Monitor Connection Conn
Summary of the content on the page No. 9
This manual is a setup and maintenance guide that can be used for refer- ence when setting up the unit and for troubleshooting when a problem occurs. Only authorized personnel should attempt to repair this unit. This manual explains about 16 channels DVR. It differs as several functions and screen comparing with 8 channels DVR. For example, the number of screen, button and sequence etc. Manufactory reserves the right to make changes to the product repre- sented by this manual without notice. T
Summary of the content on the page No. 10
O OPERA PERATION Ho How to displa w y DVR information On Screen Display(OSD) To To tog to gle between the all OSD display mode and all OSD hide modes, press the OSD button on the remote controller or the OSD button on the front panel. Live Mode (Black) Search Mode : Normal (Green) Sequence Disk Space Date/Time Mute Date/Time Mute Disk Space Playback Control : Audio Off & Recording Off Audio out Current Mode : Audio On & Recording Off Control : Audio Off & Recording On : Audio On
Summary of the content on the page No. 11
OPERATION How to display each channel & multichannel (DISPLAY) It takes about 20 seconds to initialize the DVR after input power. Once the DVR completes the initializing process, it will display the live video on the connected VGA monitor. Press the camera channel number ~ buttons on the remote controller or channel number ~ buttons on the front panel. To change display mode: REMOTE CONTROLLER Press the DISPLAY button FRONT PANEL Press the DISPLAY
Summary of the content on the page No. 12
How to hide monitoring channels for privacy Go to SETUP menu(1.BASIC SETTING - CAMERA REGISTRATION) to do setting the private protection. Press the MENU button and then press + button on the remote controller. Select ‘On’ in a privacy tab of the channel which you want to set up. Monitoring channels will not be shown on the screen. But the video can be recorded and played in th
Summary of the content on the page No. 13
OPERATION How to record monitoring channels All channels are recorded automatically when you use DVR at first time. If you want to change the recording schedule, you can change it in the SETUP menu(1.BASIC SETTING - RECORDING SCHEDULE). There are four ways for recording; Schedule recording, PANIC recording, Motion Event recording and Alarm Input recording. (6. TECHNICAL SETTING - ALARM INPUT) NOTICE This image will be displayed on video channel when DVR cannot rec
Summary of the content on the page No. 14
How to playback recorded video (Normal Search) In the playback mode you can playback the video at various speeds and forward or reverse direction. To search the archive of recorded video, press the LIVE/SEARCH button on the remote controller or the LIVE/SEARCH button on the front panel or select Go search by a mouse on context menu. To toggle between monitoring mode and playback mode: REMOTE CONTROLLER Press the LIVE/SEARCH button FRONT PANEL Press the L
Summary of the content on the page No. 15
OPERATION How to search recorded video (Advanced Search) There are three ways in advanced search: STATISTICS SEARCH, SMART SEARCH, and EVENT SEARCH. STATISTICS SEARCH This STATISTICS shows the total size of recorded data by time, week and month. Size of recorded file is proportional with frequency of motion. Comparing with these charts, you can search the video by date and time. Move cursor select date and time. The bar on the upper chart shows size of recorded files by time. Select a time
Summary of the content on the page No. 16
EVENT SEARCH DVR records several events with the date and time. All lists are displayed in the EVENT SEARCH screen. Select a date on calendar and set channel and time. Select a list of events. Then the recorded file with events plays on the screen. NOTICE The description of moving cursor or settings see the TABLE 1 (8 page) of front page. How to backup recorded video Context menu will be appeared when you press MENU button on a remote controller or press MENU button on
Summary of the content on the page No. 17
OPERATION How to connect & control PTZ The RS-485 connector can be used to control PTZ(Pan, Tilt, Zoom) cameras. Con- nect TRX+ / TRX- of the control system to the TRX+ / TRX- (respectively) of the DVR. Connect PTZ camera to RS-485 at the rear panel of DVR. NOTICE Due to specification of camera is various flowing manufacturer, please refer to the manual of camera for more detailed information about connecting and setting PTZ cameras. PTZ-CAMERA PTZ MODE The DVR can control multiple
Summary of the content on the page No. 18
SET MODE During PTZ mode, you can enter the SET MODE using Fn button. You can set up PTZ cameras and Pre-set positions at the SET MODE. To enter SET MODE, please press Fn button on remote controller or front panel or click the Fn icon on the screen. NOTICE To use MOVE PRESET and CLEAR PRESET function, you must set one pre-set position at least at SET PRESET mode. MOVE PRESET You can move the camera to the Pre-set position at this menu. You can choose the Pre-set number using , butt
Summary of the content on the page No. 19
OPERATION How to connect RS-232 port Connecting to the RS-232 P Connec ort Connect to RS-232 port with D-sub 9 pin if the external device uses RS-232 communication signal for control or data communication. Configuring the RS-232 is same as RS-485. For RS-232 setting, see “6. TECHNICAL SETTING – ETC” and for more information related to RS-232 external device, refer to its manufacture’s manual. How to use alarm input & alarm output Connecting Alar m Input & Output SENSOR To make connectio
Summary of the content on the page No. 20
Setting to the motion alarm Go to SETUP menu(6.TECHNICAL SETTING - MOTION ALARM OUTPUT) to do setting the motion alarm. When motion is detected in each camera channel during active time, alarm output device operates for alarm duration time. For motion alarm output setting, see “6. TECHNICAL SETTING - MOTION ALARM OUTPUT” Select MOTION ALARM-ENABLE in each camera channel to use alarm output function and set alarm output channel, duration and active schedule. Setting to the ETC (Alarm
