Summary of the content on the page No. 1
4 Channel H.264 DVR
P-6T4, SW242-6T4
Swann Security
www.swannsecurity.com
EN110608
Summary of the content on the page No. 2
Digital Video Recorder User Manual FCC WARNING STATEMENT This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation Important Notice All jurisdictions have specific laws and regulations regarding the use of cameras. Before using any camera for any purpose, it is th
Summary of the content on the page No. 3
Digital Video Recorder User Manual CONTENTS CHAPTER 1 Introduction........................................................................................................................................................1 1.1 DVR Introduction ................................................................................................................................................................1 1.2 Main Features and Specification..........................................................
Summary of the content on the page No. 4
Digital Video Recorder User Manual 4.1.1 Accessing DVR in LAN.....................................................................................................................................................................................41 4.1.2 Accessing DVR in WAN ...................................................................................................................................................................................42 4.2 Main Interface.........................
Summary of the content on the page No. 5
Digital Video Recorder User Manual CHAPTER 1 Introduction 1.1 DVR Introduction This DVR adopts the unique solution of Dual Stream technology, with a main processor that can process the signal of DVR recording and signal of internet transmission simultaneously, utilizing standard H.264 algorithm, the latest advanced video compression format. The solution allows DVR to have powerful internet function of remote controlling DVR completely, good internet speed, and high quality picture recordin
Summary of the content on the page No. 6
Digital Video Recorder User Manual RECORD & PLAYBACK • Record modes: Manual operation, Sensor detection, Schedule Record and Motion detection • Support HDD recycle • Support single channel playback • Support deleting and locking the record • Support remote playback in Network Client through LAN or internet • Two record search mode: time search and event search ALARM 4 alarm inputs and 1 alarm output. PTZ CONTROL • Support various PTZ protocols • Support various PTZ preset • Suppor
Summary of the content on the page No. 7
Digital Video Recorder User Manual CHAPTER 2 Panel Function Please make sure DVR is powered off before you connect the DVR with other equipment. Do not hot plug in! 2.1 Check the Accessories When you receive the machine, please check accessories and make sure you have all the parts. Normally, accessories include: a mouse a Remote Controller, a power cable, a CD-ROM with ‘Network Client’ software and some screws for installing HDD. You could use screwdriver and some screws to fix th
Summary of the content on the page No. 8
Digital Video Recorder User Manual CH 1 Digital Video Recorder CH 4 CH 3 QUAD/ENTER RECORD SEARCH PLAY CH 2 REW FORWARD POWER STOP INFO 1 2 3 4 5 6 7 8 9 10 1 Power button 2 Record button 3 Play button 4 Fast Backward button 5 Fast Forward button 6 Stop button 7 Information button 8 Left /Up /Right /Down buttons 9 Quad/Enter button 10 Search button Fig2.1 Front Panel 2.3 Back Panel & Interface Terminals The interfaces on the Back Panel please refer to the entity. There might be slight
Summary of the content on the page No. 9
Digital Video Recorder User Manual 1 Power plug 2 Alarm in/alarm out 3 RS485 4 USB interface 5 LAN port 6 Audio in 1-2 7 S-video output 8 Audio output 9 Video output 10 Video in 1-4 Fig2.2 Back Panel 2.4 Remote Controller Introduction 2.4.1 Use Remote Controller Notice: Please note that Remote Controller is not a standard part of this DVR. Your package might not include it. Steps of using the Remote Controller are described as below: STEP1 Put the battery into the Remote Controll
Summary of the content on the page No. 10
Digital Video Recorder User Manual 2.4.2 Facie of Remote Controller The entire facie of the Remote Controller is shown in Fig2.3 Remote Controller. Fig2.3 Remote Controller All buttons on the Remote Controller describes as below table. You could use "A" button on the Remote Controller to switch the input mode. Button Name Description Power Button POWER Press the button to shutdown the DVR. Record Button REC If the DVR does not record, press the button to start recording. If the
Summary of the content on the page No. 11
Digital Video Recorder User Manual Button Name Description Four-screen display mode 2X2 Press the button to display the picture of four channels. Press "1X1" button in four-screen display mode to enter the channel 1. Nine-screen display mode 3X3 Press the button to display the picture of nine channels. Press "1X1" button in nine-screen display mode to enter the channel 1. Sixteen-screen display mode 4X4 Press the button to display the picture of sixteen channels. Press "1X1" button
Summary of the content on the page No. 12
Digital Video Recorder User Manual Button Name Description Stop Stop button: Press the button to stop playing record. Audio switch button Audio switch Press the button to switch the audio of the channel. Sequence Button SEQ Press the button to make DVR display channels in turn. A Button A Press the button to switch the mode of font form. PTZ button PTZ Press the button to enter the PTZ mode. Zoom button Zoom+/- Control the Fast Speed Dome to zoom-in and zoom out.
Summary of the content on the page No. 13
Digital Video Recorder User Manual Number Button Corresponding Letter Number Button Corresponding Letter 1 ().@<> 2 ABC/abc 3 DEF/def 4 GHI/ghi 5 JKL/jkl 6 MNO/mno 7 PQRS/pqrs 8 TUV/tuv 9 WXYZ/wxyz 9
Summary of the content on the page No. 14
Digital Video Recorder User Manual CHAPTER 3 Basic Operation Guide 3.1 How to Start DVR Notice: Before you power on the machine, please make sure the power input of DVR is eligible for local power supply. If the power indicator light is off, please do as the following to start DVR: STEP1 Connect DVR to AC adaptor and plug in. STEP2 Turn on the DVR. STEP3 Wait for DVR to initialize. After the DVR is powered on, ‘STARTING……’ appears on the screen, which indicates DVR is initializing.
Summary of the content on the page No. 15
Digital Video Recorder User Manual (referred Fig3.2 Main Menu). MAIN MENU BASIC CONFIG LIVE CONFIG RECORD CONFIG ALARM CONFIG PTZ CONFIG USER CONFIG NETWORK MANAGER TOOLS Fig3.2 Main Menu Fig3.1 Login STEP2 Press "Up", "Down", "Right" and "Left" buttons to move cursor, selection highlighted by yellow. STEP3 Press "Enter" key to enter the sub-menu. And press "Menu" key to get back to Main Menu when you use the front panel to operate. The structure of the main menu is
Summary of the content on the page No. 16
Digital Video Recorder User Manual 3.2.1 Basic Configuration Basic Configuration menu is shown as Fig3.4 Basic Configuration. Fig3.4 Basic Configuration Fig3.5 Time Adjust 1. VIDEO FORMAT After you enter the Basic Configuration menu, you need to set the video format. There are two options to choose: NTSC and PAL. STEP1 Press "Up", "Down", "Left" and "Right" buttons to move the cursor manually. STEP2 Press "Enter" key to change the video format. 2. TIME POSITIO
Summary of the content on the page No. 17
Digital Video Recorder User Manual STEP2 Modify the DVR name. STEP3 Press "Enter" key to confirm the operation. 4. DVR ID You could set DVR ID. It consists of three numbers. STEP1 Press "Up", fDown", "Left" and "Right" buttons to move the cursor. STEP2 Press "Enter" key to modify numbers. STEP3 Input three numbers, and press "Enter" key to confirm modifying the parameter. STEP4 Press "OK" button to confirm the operation. 5. DATE FORMAT There are three options to choose: • Asia
Summary of the content on the page No. 18
Digital Video Recorder User Manual Fig3.6 Live Configuration 1. CHANNEL STEP1 Press "Up", "Down", "Left" and "Right" buttons to move the cursor. STEP2 Press "Enter" key to switch the channel which you want to set. 2. CHANNEL NAME You could set the channel name. Range for inputting the words contents letters from ‘a’ to ‘z’ and numbers from ‘0’ to ‘9’. STEP1 Press "A" button to switch the inputting mode. STEP2 Input channel name. STEP3 Press "Enter" key to confirm the operation.
Summary of the content on the page No. 19
Digital Video Recorder User Manual Modify value of contrast, brightness, saturation and hue of the picture. 6. COPY CONFIG TO Copy the configurations of this channel to any other selected channel. STEP1 Select the channel which this channel will be copied to. STEP2 Press "COPY" button. STEP3 Press "Enter" key to confirm the operation. 3.2.3 Record Configuration Record Configuration menu is shown as Fig3.7 Record Configuration. You could enter the menu to set the parameters of recor
Summary of the content on the page No. 20
Digital Video Recorder User Manual 2. RECYCLE If select "RECYCLE" check box to have continuous recording, DVR will overwrite the oldest record when HDD is full. If you unselect "RECYCLE" check box, the DVR will stop recording when the HDD is full. 3. TIME STAMP If selecting the check box, record time will be displayed on the bottom of screen when playing back the record. 4. PRERECORD TIME Prerecord time is the record time before alarm. There are two options to choose: 5 seconds and 10 se
