Summary of the content on the page No. 1
Model #: CVDVR900
MPEG-4 Embedded DVR
User Manual
now you can see
www.svat.com
Summary of the content on the page No. 2
INSTALLATION GUIDELINE A. Installation Environment In order to ensure the safety with the DVR product and maximize product per- formance, please notice the following while/ before you install the product: i. Only use with AV220V voltage supply, please check with the power supply with correct voltage before installation. DO NOT USE WITH ANY OTHER ADAPTER (DO NOT PLUG INTO AC380V HIGH VOLTAGE SUPPLY!) ii. Away from a humid place or exposure with rain. iii. DVR should be installin in a horizonta
Summary of the content on the page No. 3
PRODUCT FUNCTIONS/ FEATURES • High speed embedded CPS and real time embedded control operation system are adapted with the product. It provides operation stability, no hang-up error, more reliability and ease for maintainance. • Operation with front panel and remote control, menu language also available in English/Chinese/Simplified Chinese. Security with double password lock. System management requires authority code in order to provide safety system. • Uses a hardware MPEG-4 encoder to pr
Summary of the content on the page No. 4
FRONT PANEL Front Panel and key definition: 1. LED Indicator status area • [1-8]LED Indicators: indicate 8 different channels for recording status, (for the 4-channel model: only works for LED[1-4], others will be off). LEDs that are on indicate recording in progress, and LEDs that are off indicate that the system is in standby. • [1-4]HD: indicate 4 different hard disk working status. LEDs that are on indicate hard disk work in progress, and LED off indicate that the hard disk is in standb
Summary of the content on the page No. 5
FRONT PANEL ...continued 5. Other options Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Definition [Power ON /Power Off] . . . . . . . . . . . .System turn on and off(Stand-by and start) [Login/Locked]Key . . . . . . . . . . . . . . . .Login to enter to operate mode with require password and lock current setting activation [Status] . . . . . . . . . . . . . . . . . . . . . . . . . .Checking with record information store inside of hard drive. [Display Swap] . . . . . . . . . . . .
Summary of the content on the page No. 6
BACK PANEL ...continued Back Panel and connection outlet: 1 Ventilation fan 2 AC220V power in 3 Power switch 4 Alert signal in/out/ RS-485: 4 channels input/ output 5 Audio input: provide 4 channels audio input 6 Audio output: 2 channels for audio out, left side for replay output, right side for the surveillance output 7 Video output: 2 channels for video signal output, channel 1 for surveillance output, channel 2 for mixed video output 8 Video input: Channel 1~4 for video signal input 9 VGA:
Summary of the content on the page No. 7
REMOTE CONTROL Remote Control Key Definition / Function: 1. Numeric Key [0-9]Keys : Numeric, for number key-in or video swapping. For non-menu screen, 1, 2, 3 and 4 represent for the video channel 1, 2, 3 and 4 respectively. [+], [-]Keys : Use for volume control, or while checking can play as next/pervious page, even changing some parameters for configuration. 2. Menu Operation : Up, Down directional keys; : Left, Right directional keys; [ENTER]Key: Confirm OR Time display while in monito
Summary of the content on the page No. 8
REMOTE CONTROL Remote Control Key Definition / Function: 5. Other options Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Definition [Power ON /Power Off] . . . . . . . . . . . .System turn on and off (Stand-by and start) [Login /Locked]Key . . . . . . . . . . . . . . .Login to enter to operate mode with require password and lock current setting activate [Status] . . . . . . . . . . . . . . . . . . . . . . . . . .Checking with record information store inside of hard drive [Displa
Summary of the content on the page No. 9
SYSTEM START-UP/SHUT DOWN 1. System Start up Plug in your AC power, turn on the main unit, the red light will turn on while the system boots up. The system will be in standby mode. Press the [ON/OFF]button in front panel or remote control, the red light will turn off, then the monitor will be activated to show as 4-channel windows status. There will be channel numbers shown to indicate each input signal. Also, the top of screen will show the system time, number of hard disk and CF card stat
Summary of the content on the page No. 10
OPERATION INSTRUCTION A. Menu Setup While system is powered up, select [General Setting] to alter the system setup. The setup menu can be seen below, highlight the item for selection and then press [Enter] to confirm. (while system recording, not allow to change any setting for current channel) GENERAL SETTINGS Record Settings Timer Record Motion Detection Alarm Record Channels Housings Network Language Exit A-1 General Parameter Setting: Highlight and select "General Settings", then
Summary of the content on the page No. 11
OPERATION INSTRUCTION Example: below is the record default setting: Record Settings Channel Quality Definition Frame Mode 1 14 CIF 25 CBR 2 02 CIF 25 CBR 3 03 CIF 25 CBR 4 04 CIF 25 CBR HDD Store Mode Centralize Individual Compound Return A-2 Record Parameter Setup: While system operated, select "Record Setting" to changing some setting in here: GENERAL SETTINGS Record Settings Record Settings Channel Quality Definition Frame Mode Timer Record 1 14 CIF 25 VBR Motion Detection 2 0
Summary of the content on the page No. 12
OPERATION INSTRUCTION continued Conversion Table for Image Quality and Encoding Rate Image Quality (Encode Rate Kbit/Second) Sharpness 1 2 3 4 5 6 7 8 D1 Fixed 2400 2200 2000 1800 1600 1200 1000 800 CBR HD1 Fixed 1200 1100 1000 900 800 600 500 400 CIF Fixed 900 800 700 600 500 400 300 200 MAX 2400 2200 2000 1800 1600 1200 1000 800 D1 MIN 2000 1800 1400 1200 1000 800 600 400 MAX 1200 1100 1000 900 800 600 500 400 VBR HD1 MIN 900 800 700 600 500 400 300 200 MAX 900 800 700 600 500 400 300 200 CIF
Summary of the content on the page No. 13
OPERATION INSTRUCTION continued • Date: Select either "Everyday", "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" and "Peak", when "Peak" time selected, the device will not use the stand-by function. • Period 1 and Period 2: Select start time and end time. Motion Mode: "On, Off" are the 2 different status settings to enable and disable this func- tion respectively. Using the cursor to select and press [Enter] to confirm this function. A-4 Motion Detection Setting: Highlight and select Motion
Summary of the content on the page No. 14
OPERATION INSTRUCTION continued A-5 Alarm Record Setting: Highlight and select Alarm Record, then press [Enter] for this selection, the sub-menu will shown (as below), then select the required area. GENERAL SETTINGS Alarm Record Settings Record Settings Timer Record Ch Alarm In_Mode Motion Detection 1 On Close Alarm_Delay: 005s Alarm Record 2 Off Open Out_Delay: 005s Channels 3 On Open Keep_Delay: 005s Housings 4 Off Open Multi_Ch_Rec: On Network Multi_Ch_Output: On Langua
Summary of the content on the page No. 15
OPERATION INSTRUCTION continued Multi_Ch_Rec: "On, Off" are the 2 different status settings available. Use the cursor to select and press [Enter] to confirm this function. While "On" is selected, there will be 4 multiple channels interface display as shown below: Alarm Record Settings Multiple Channel Alarm Recording setting Alarm Channel Ch Alarm In_Mode 12345678 1 On Close Alarm_Delay: 005s 1* * 2 Off Open Out_Delay: 005s 3 On Open Keep_Delay: 005s 2* 4 Off Open Multi_Ch_Re
Summary of the content on the page No. 16
OPERATION INSTRUCTION continued • Use the directional key to move small yellow block selection. When 4 points of yellow block are produced there will be q region wet up for the coverage setting area. Time insert: "On, Off" are the 2 different status settings. Use the cursor to select and press [Enter] to confirm this function. While "On" selected, a system clock will be shown while recording. A-7 Housing Setting: Highlight and select Housings, then press [Enter]for the selection, the sub-menu
Summary of the content on the page No. 17
OPERATION INSTRUCTION continued A-10 Exit: Highlight and select Exit, then press [Enter] to confirm for save the change of setting then return back to main menu. B. Info Menu While system is in use, select [Info Menu] to check the menu content. The info menu can be seen as shown below, highlight the item for selection and then press [Enter]to confirm. Info Menu All Record Alarm Record Alarm Log Operate Log Channel Status HDD Status Machine Info Exit B-1 All Record: Highlight and select All Re
Summary of the content on the page No. 18
OPERATION INSTRUCTION continued Press [Enter] to see the recording video/audio signal, press [F1]for time select playback, and press [SLOW] for slow motion playback at a different speed. Press [FF]for fast forward playback and [FB]for fast backward playback, press [PAUSE] key to pause the video. [RETURN] to exit the playback window and back to main menu. B-2 Alarm Record: Highlight and select Alarm Record, then press [Enter] for this selection, the sub-menu will be displayed (as below. Then sele
Summary of the content on the page No. 19
OPERATION INSTRUCTION continued B-3 Alarm Log: Highlight and select Alarm Log, then press [Enter] for this selection, the sub-menu will be shown (as below), this allows you to see the recent alarm status and report. Info Menu Alarm Log All Record 2003/11/28, 23:30 Alarm at :1 Alarm Record Alarm Log Return Page Up Page Down First Page Operate Log Channel Status HDD Status Machine Info Exit B-4 Operate Log: Highlight and select Operate Log, then press [Enter] for this selection, the sub-menu wil
Summary of the content on the page No. 20
OPERATION INSTRUCTION continued B-7 Machine Info: Highlight and select Machine Info, then press [Enter] for this selection, the sub-menu will be shown (as below), this allow to show all the machine ID number and software version. Info Menu Machine Info All Record Alarm Record Unit ID.: 43743746194619463289573296 Alarm Log Version: Operate Log Channel Status HDD Status Machine Info Return Exit B-8 Exit: Highlight and select Exit, then press [Enter] to confirm for save the change of setting th
