Metra Electronics 88-00-2020 user manual

Summary of the content on the page No. 1

INSTALLATION INSTRUCTIONS FOR PART 88-00-2020
APPLICATIONS
STORAGE POCKET
(TO BE USED WITH INST99-2020
BUICK Regal 1988-1994)
88-00-2020
INSTALLATION INSTRUCTIONS
KIT FEATURES
• OEM Radio Replacement Pocket
KIT COMPONENTS
A) Storage Pocket
A
TOOLS REQUIRED:
• Phillips Screwdriver • Small Flat Blade Screwdriver • Panel Removal Tool
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2001-2008 METRA ELECTRONICS CORPORATION

Summary of the content on the page No. 2

88-00-2020 TABLE OF CONTENTS Dash Disassembly - All Vehicles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Final Assembly .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 *Note: Refer also to the instructions included with the aftermarket radio. Chevrolet - Blazer 1973-1987, Pickup 1973-1987. . . . . . . . . . . . . . . . . . . . . . . . .1 GMC KNOWLEDGE IS POWER Enhance your installation and fabrication

Summary of the content on the page No. 3

88-00-2020 DASH DISASSEMBLY ALL VEHICLES DASH DISASSEMBLY Disconnect the negative battery terminal to prevent an accidental short circuit. Unclip the entire dash trim bezel and remove. Remove 9/32" fasteners from the right side of the factory radio module and (2) fasteners from the left side. Disconnect the wiring and remove the module. Refer also to instructions included with Metra Kit INST99-2020. See Fig. A. Continue to final assembly. A Factory Radio Module 1

Summary of the content on the page No. 4

88-00-2020 FINAL ASSEMBLY ALL VEHICLES FINAL ASSEMBLY 1 Insert the Metra storage pocket in the radio cavity. (See Fig. A) A 1-800-221-0932 www.metraonline.com REV. 12/17/08 © COPYRIGHT 2001-2008 METRA ELECTRONICS CORPORATION INST99-2020 2