Summary of the content on the page No. 1
RC305H-JM_BUSAJJK
DVD VIDEO RECORDER
DR-MV80B
For Customer Use :
Enter below the Model No. and
Serial No. which are located on the
rear of cabinet. Retain this
information for future reference.
Model No.
Serial No.
INSTRUCTIONS
LVT2013-001A
[J]
Summary of the content on the page No. 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) CAUTION: NO USER-SERVICEABLE PARTS INSIDE This product employs a Laser System. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future refer- ence. Should the unit require maintenance, contact This lightning flash with arrowhead symbol within an equilateral triangle is intended t
Summary of the content on the page No. 3
FCC WARNING: This equipment may generate or CAUTION concerning the Power Cord use radio frequency energy. Changes or modifica- Most appliances recommend they be placed upon tions to this equipment may cause harmful interfer- a dedicated circuit; ence unless the modifications are expressly approved in the instruction manual. The user could That is, a single outlet circuit which powers only that lose the authority to operate this equipment if an appliance and has no additional outlets or branch ci
Summary of the content on the page No. 4
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the
Summary of the content on the page No. 5
INTRODUCTION RECORDING About DVD recording . . . . . . . . . . . . . . . . . .28 About the Symbol Display . . . . . . . . . . . . .2 Notes for recording . . . . . . . . . . . . . . . . . . . .28 Symbol Used in this Manual . . . . . . . . . . . . . .2 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .2 Recording time and picture quality . . . . . . .28 Moisture Condensation . . . . . . . . . . . . . . . . . .2 Basic Recording (One-Touch Recording) . . .29 Recordable and Playable Discs
Summary of the content on the page No. 6
Introduction To ensure proper use of this product, please read Notes on Discs this owner’s manual carefully and retain for future reference. Handling Discs Do not touch the playback side of the disc. Hold the About the Symbol Display disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. “ ” may appear on your TV display during operation and indicates that the function is not permitted by this unit or specific media. Symbol Used in this Manual
Summary of the content on the page No. 7
Recordable and Playable Discs DVD-RW (DVD - ReWritable) DVD-RW discs can be formatted for VR mode recording or Video mode recording. These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc. [VR mode] Recordings can be extensively edited Playable only on VR mode compatible players (after finalization) [Video mode] Playable on regular DVD players (after finalization) Limited editing features DVD-R (DVD - Recordable) These Discs can be
Summary of the content on the page No. 8
Playable Discs DVD (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented Video CD (VCD) (8 cm / 12 cm disc) VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format Audio CD (8 cm / 12 cm disc) Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased CD-R/CD-RW (8 cm / 12 cm disc) CD-R/CD-RW discs that contain audio titles, MP3, WMA or JPEG files. Notes: • Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW
Summary of the content on the page No. 9
Restrictions on video recording •You cannot record copy-protected video using this recorder. Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording will pause or stop automatically and an error message will be displayed on-screen. •Video that is ‘copy-once only’ can only be recorded using a DVD-RW disc in VR mode or DVD-RAM disc with CPRM (see below). What is ‘CPRM’? CPRM is a copy protection system (wi
Summary of the content on the page No. 10
Front Panel ab c d e fgh i j k l mn o p The DVD deck is selected. a Disc Tray (DVD deck) DVD Insert a disc here. Lights when the Recorder is in playing mode b Z OPEN/CLOSE or flashes when search mode. Opens or closes the disc tray. The VCR deck is selected. VCR c Cassette Compartment (VCR deck) Indicates when the recorder is in timer Insert a video cassette here. recording or a timer recording is d Z EJECT programmed. This indicator will flash when the unit is set Ejects the tape in the VCR
Summary of the content on the page No. 11
Remote Control EJECT, OPEN/CLOSE (Z) bBvV (left/right/up/down) - Opens and closes the disc tray. Selects menu options. - Ejects the tape in the VCR deck. ENTER ( ) Confirms menu selections. Skips 30 seconds forward during DISPLAY playback. Accesses On-Screen Display. a AUX Displays information of current status. Changes the input to use for recording RETURN (O) (AV1, AV2, or DV IN). Removes the menu. 0-9 numerical buttons Selects numbered options in a menu. JVC TV Control Buttons d
Summary of the content on the page No. 12
Note: Remote Control Function If you change the batteries of the Remote Control with (Refer to page 7) A, B or D code, the remote control code is set to C automatically. In this case, you should reset the remote Remote Control A/B/C/D Code Switching control code described above. The remote control is capable of controlling four JVC video units independently. Each of the units can respond to one of four codes (A, B, C or D). The remote control is preset to send C code signals because your unit is
Summary of the content on the page No. 13
Rear Panel ab c d e fg h i a OPTICAL (DIGITAL AUDIO OUTPUT) f COAXIAL (DIGITAL AUDIO OUTPUT) Connect to digital (optical) audio equipment. Connect to digital (coaxial) audio equipment. b COMPONENT OUTPUT (Y PB PR) g S-VIDEO OUTPUT Connect to a TV with Y PB PR inputs Connect to a S-Video Input on TV. c INPUT 1 (VIDEO/AUDIO (Left/Right)) h AUDIO OUTPUT (Left/Right) Connect the audio/video output of an external Connect to a TV or other equipment with audio source (Cable/Satellite box, Audio syste
Summary of the content on the page No. 14
Hookup and Settings Depending on your TV and other equipment Component Video connection there are various ways you can connect the If your television is a high-definition or “digital ready” recorder. Please refer to the manuals of your television, you may take advantage of the Recorder’s TV, VCR, Stereo System or other devices as progressive scan output for the highest video resolu- necessary for additional connection informa- tion possible. tion. Connect the COMPONENT OUTPUT jacks on the Recor
Summary of the content on the page No. 15
HDMI connection HDMI compatible TV HDMI If you have a HDMI TV or monitor, you can connect it to this recorder using a HDMI cable. 1. Connect the HDMI OUTPUT jack on the recorder H to the HDMI INPUT jack on a HDMI compatible TV or monitor (H). 2. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). Notes: • This unit will only provide up converted SD resolutions when a HD resolution has been selected for the HDMI output. HDMI has the capability to support standard, enhanced, • If your TV
Summary of the content on the page No. 16
Connection to an Amplifier Connection to an Amplifier Rear of Recorder Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic Connect the Left and Right AUDIO OUTPUT jacks on the Recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system using the audio cables (A) supplied. Connecting to an amplifier equipped with two chan- nel digital stereo (PCM) or to an Audio/Video receiv- er equipped with a multi-channel decoder (D
Summary of the content on the page No. 17
Connecting a Digital Camcorder Cable/Satellite box Connecting a Digital Camcorder Cable/Satellite box Connection to unit Connection to unit Use a DV cable (not supplied) to connect the DV in/out jack of your DV Digital Camcorder to the front To use Timer-Link Recording, connect the INPUT1 panel DV IN jack of this Recorder. jacks on the unit to the audio/video out jacks on your Cable/Satellite box, using the optional audio/video Notes: cables. (Refer to page 30 for “Timer-Link Recording”.) This
Summary of the content on the page No. 18
Initial Setup Wizard Using the Home Menu Initial Setup Wizard Using the Home Menu After the STANDBY/ON is pressed for the first time to From the Home Menu screen you can access all the turn on the unit or after factory setting (See page 15), Media for playback and recording of the recorder. the Initial Setup Wizard function sets the Language and Clock step-by-step until the setup is complete. 1. Press HOME and the Home menu appears. 2. Use b / B to select the desired main option. 1. Use v / V
Summary of the content on the page No. 19
Initial Settings General Settings Initial Settings General Settings To access to the General Setting. In this menu system, there are several ways to cus- tomize the settings provided. Most menus consist of 1. Press HOME and the Home menu appears. three levels to set up the options, but some require 2. Select [Setup] > [Start] and press ENTER. greater depth for the variety of settings. 3. Use v / V to select (General) option and 1. Press HOME and the Home menu appears. press B. 2. Select [Setup
Summary of the content on the page No. 20
Language Settings Audio Settings Language Settings Audio Settings To access to the General Setting. To access to the General Setting. 1. Press HOME and the Home menu appears. 1. Press HOME and the Home menu appears. 2. Select [Setup] > [Start] and press ENTER. 2. Select [Setup] > [Start] and press ENTER. 3. Use v / V to select (Language) option and 3. Use v / V to select (Audio) option and press B. press B. Each DVD disc has a variety of audio output options. Set the Recorder’s Audio Output acc
