Kenwood SIRIUS KPA-H2C user manual

Summary of the content on the page No. 1

Summary of the content on the page No. 2

• Failure to follow these safety instructions and Box contents Safety precautions warnings may result in a serious accident. Unpack your KPA-H2C kit carefully and make sure that everything listed here is present: Warning Caution 1 x Cradle 1 x Base 1 x Antenna 1 x Cassette adapter Take the following precautions to prevent traffic Take the following precautions to keep the unit in accidents and avoid personal injury: proper working order: • Installation must be performed according to this • Be su

Summary of the content on the page No. 3

Installation in a vehicle Installation in a vehicle (continued) Note: Do not put Here Anywhere in the docking station until you have completed the installation. 2 1. Determine where you want to mount 2. The leaves on the base can be bent to con- 5. Plug the cigarette lighter adapter 6A. Plug the cassette adapter 6B. If your car stereo has an aux input, 4. Using the provided screw, Here Anywhere. form to curved mounting surfaces. into the back of the cradle, as into the back of the cradle, plug t

Summary of the content on the page No. 4

Installation in a vehicle: Mounting the antenna Installation in a vehicle: Routing the cable Note: If you’re using the Kenwood CX-SR10 SIRIUS antenna, you’ll need to remove the plastic 8. Route the cable from the antenna to the vehicle’s interior by 9. Route the cable from the lowest point of the rear win- 1. Temporarily plug the antenna housings from the antenna connectors—we recommend labeling the wires with their respective tucking it underneath the rubber molding around rear window, dow int

Summary of the content on the page No. 5