Summary of the content on the page No. 1
User Manual
EMV400 DVR
EMV400 DVR
Summary of the content on the page No. 2
EVERFOCUS ELECTRONICS CORPORATION EMV400 DVR Instruction Manual 2010 EverFocus Electronics Corp www.everfocus.com All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by any means without written permission of the Everfocus Electronics Corporation. Release Date: Oct. 2010 QuickTime is a registered trademark of the Apple Computer, Inc. Windows is a registered trademark of the Microsoft Corporation. Li
Summary of the content on the page No. 3
Safety Precautions Refer all work related to the installation of this product to qualified service personnel or system installers. Do not block the ventilation openings or slots on the cover. Do not drop metallic parts through slots. This could permanently damage the appliance. Turn the power off immediately and contact qualified service personnel for service. Do not attempt to disassemble the appliance. To prevent electric shock, do not remove screws or covers. There
Summary of the content on the page No. 4
Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards. Water and Moisture Do not use this unit near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, near a swimming pool, in an unprotected outdoor installation, or any area which is classified as a wet location. Servicing Do not attempt to service this unit by yourself as opening or removing covers may expose you to dangerous vo
Summary of the content on the page No. 5
WEEE This Product is RoHS compliant. The information in this manual was current upon publication. The manufacturer reserves the right to revise and improve his products. Therefore, all specifications are subject to change without prior notice. Manufacturer is not responsible for misprints or typographical errors. Please read this manual carefully before installing and using this unit. Be sure to keep it handy for later reference.
Summary of the content on the page No. 6
TABLE OF CONTENTS 1 PRODUCT OVERVIEW ..................................................................................................... 1 1.1 FEATURES....................................................................................................................... 1 1.2 PACKAGE CONTENTS................................................................................................... 2 1.3 SPECIFICATIONS.............................................................................
Summary of the content on the page No. 7
4.2.2 Video Adjust ..........................................................................................................................................36 4.2.3 Alarm.....................................................................................................................................................37 4.3 RECORD SETTING....................................................................................................... 38 4.3.1 Record ..................................
Summary of the content on the page No. 8
6.2 BROWSER SECURITY SETTING .................................................................................... 97 6.2.1 Installing ActiveX controls ....................................................................................................................97 6.2.2 Enabling ActiveX Controls..................................................................................................................100 6.3 REMOTE LIVE VIEW .......................................................
Summary of the content on the page No. 9
Chapter 1 1 PRODUCT OVERVIEW Full featured video surveillance on the move: the EverFocus EMV400 digital video recorder, with H.264 compression technology for enhanced recording capacity and improved network image transmission speed with high image quality, delivers real-time video and audio recoding on all 4 channels (120FPS @ 2CIF/ 60fps @ D1 resolution, frame rate and resolution independently configurable for each camera). The DVR provides multiple interfaces including 3 USB ports, RS
Summary of the content on the page No. 10
Temperature : -20ºC ~ 55ºC (Operating), -20ºC ~ 85ºC (Non-Operating) 1.2 PACKAGE CONTENTS - Digital Video Recorder x1 - HDD Tray x 1 - HDD Fixing Bracket x 1 set - Screws x 1 pack - Antenna x 1 set - IR Remote Control x 1 - Battery x 2 - Camera Power cable x 3 - Video & Audio cable x 3 - Alarm cable x 1 - Alarm Output cable x 1 - RS232/RS485 cable x 1 - GPS cable x 1 - DVR power cord x 1 2
Summary of the content on the page No. 11
1.3 SPECIFICATIONS EMV400 - 4CH Mobile DVR Video Format NTSC/PAL (auto detected by system) Operating System Embedded Linux with special small monitor friendly GUI Video Input 4 channels (vibration resistant locking Molex connectors – Interface cables to BNC-F supplied: two groups of 2 cameras each) Video Output Main monitor: 1 composite BNC rear panel / 1 front panel RCA output Video Compression H.264 Recording Resolutions NTSC: 720x480/720x240/360x240 PAL: 720x576/720x288/360x288
Summary of the content on the page No. 12
Email alert Multiple email notifications in response to alarms and events. (Requires real time network connectivity though cellular or WiFi service). G Sensor Embedded 3-axis G Sensor; data recorded; alarm if separate user limits for X/Y or Z axis exceeded GPS Function Optional External GPS Sensor for speed and geographic limit alarms (rectangular or circular fencing) Configuration Method On screen menu with ‘portable monitor friendly’ graphical user interface Control/Setup IR remote
Summary of the content on the page No. 13
1.4 FRONT PANEL Your primary interaction with your new DVR will be through the Front Panel buttons and their corresponding buttons on the included IR Remote Control. Take a moment to learn where the keys are as the remainder of the manual will refer to them often. Figure 1-1 Front Panel 1) USB 2.0: For connecting USB-Flash-Drive to copy/archive video or for firmware upgrades. 2) Audio Out: Connect to the line level input of an audio amplifier (same output as the aud
Summary of the content on the page No. 14
LAN: This LED ON indicates Network active. Network LED turns on depending on the network type (LAN, Wireless or Mobile) set in Network setting. Record: This LED ON indicates Record active. Power: This LED ON indicates Power on. 6
Summary of the content on the page No. 15
1.5 REAR PANEL During initial setup you will be connecting your DVR to multiple input and output devices. This is done through the rear panel. Figure 1-2 Rear Panel 1 ○ Power Input/Ignition Control In/Switched power out: 4 pins are reserved for power input; connect to 10V~36VDC power source. 1 pin is for ignition control; connect to the other vehicle devices to avoid excess power consumption at ignition. 1 pin is reserved for switched power out. The power source used for this a
Summary of the content on the page No. 16
4 ○ GPS Data Input: Connect this connector to GPS receiver via GPS cable. 5 ○ Network Connector: RJ-45 network connection 10/100Mbps Ethernet. There are two LEDs on the LAN jack; Green LED means network is connected, amber LED flickers when data is being exchanged. 6 ○ USB port: USB port recommended for connecting the USB mouse. 7 ○ RS232 socket: Connect this connector to RS232/RS485 compatible device. 8 ○ Main Monitor Out: Main monitor for live and playback display and o
Summary of the content on the page No. 17
1.6 SYSTEM CONNECTION Please refer to the following diagrams for the system connections. Note: Monitor and Camera must be purchased separately. 9
Summary of the content on the page No. 18
1.7 REAR PANEL CONNECTOR POWER RS232/RS485 IGN 485+ 485- GND GND 12V ALARM IN ALARM IN1 ALARM IN2 ALARM IN3 ALARM IN4 ALARM IN5 ALARM IN6 GND GND GND GND GND GND ALARM OUT NO1 COM1 NC1 NO2 COM2 NC2 VIDEO/AUDIO IN1 VIDEO IN1 VIDEO IN2 VIDEO IN3 VIDEO IN4 GND GND GND GND VIDEO/AUDIO IN2 VIDEO IN1 VIDEO IN2 VIDEO IN3 VIDEO IN4 GND GND GND GND 10
Summary of the content on the page No. 19
CAM POWER1 CAM POWER2 12V OUT 12V OUT 12V OUT 12V OUT GND GND GND GND GPS GND GPS_TX GPS_RX +12V 11
Summary of the content on the page No. 20
1.8 INSTALLATION OF EMV400 The DVR can be mounted horizontally (suspend or support mounted). Support Interface Interface Suspend Show all the possible ways to mount the DVR. Use the two Z-brackets supplied to mount it in any ways shown. Support EDSR40 Support EDSR400M Suspend 12
