Summary of the content on the page No. 1
Personal Video Recorder
ENUTV-2
(USB TV Capture Box)
ENUTV-2 Series
User’s Guide
Summary of the content on the page No. 2
ENUTV-2 User’s Guide - User’s Notice No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of us. WE PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
Summary of the content on the page No. 3
ENUTV-2 User’s Guide - Chapter 1: Introduction …………………………………………………………………………….4 1.1 Package Contents................................................................................................................. 4 1.2 System Requirements........................................................................................................... 4 Chapter 2: Getting Started ................................................................................................................. 5 2.1
Summary of the content on the page No. 4
ENUTV-2 User’s Guide - Chapter 1: Introduction 1.1 Package Contents Upon receiving your ENUTV-2, please make sure the following items are included in the package. • ENUT V-2 • Driver CD • Remote Control • USB Cable • Quick Guide 1.2 System Requirements • IBM PC or compatible • P4 1.6 (for Preview); P4 2.4 or above(Mpeg 4 need 2.8) (for Record) • Minimum 128 MB memory (256MB is better) • Minimum 100 MB hard disk space available • VGA and with DirectDraw driver supporting
Summary of the content on the page No. 5
ENUTV-2 User’s Guide - Chapter 2: Getting Started 2.1 Connect USB ENUTV-2 To install the ENUTV-2 into your computer, follow the steps below: 1. Connect the antenna cable to the “TV” connector. 2. Connect the Device to PC USB Hub. 2.2 Device Driver Installation 1. Once you connect ENUTV-2 to the USB port, you can just follow the system’s prompted messages to finish the driver installation. 2. When you insert ENUTV-2, system will show the “Found New Hardware” dialogue box.
Summary of the content on the page No. 6
ENUTV-2 User’s Guide - 4. Click “Next” button. 5. Click “Install” button. 6. Click “Next” button. 7. Wait Installation Wizard copying necessary driver files onto your system. 6
Summary of the content on the page No. 7
ENUTV-2 User’s Guide - 8. Click “Continue Anyway” button. 9. Click “Finish” button. 10. Click “Finish” button again to complete installation. 2.3 Install the DirectX® Microsoft DirectX® allows 3D hardware acceleration support in Windows® 98, 2000, Windows® XP. For software MPEG support in Windows 98, you must first install Microsoft DirectX®, and then an MPEG compliant video player. Follow the installation steps below to install Microsoft DirectX®. 7
Summary of the content on the page No. 8
ENUTV-2 User’s Guide - 1. Insert the installation CD into the CD-ROM drive. The setup screen will automatically appear. 2. Click the “DirectX” button. 3. Click “Accept the agreement” radio button then click “Next” 4. Click “Next” to confirm the installation of DirectX 5. Click “Finish” NOTE: The computer will automatically restart. Please close all programs if any and save files if needed before hitting the “Finish” button. 8
Summary of the content on the page No. 9
ENUTV-2 User’s Guide - 2.4 Install the ENUTV-2 Utility Software. 1. Click “Setup Utility” to begin installing TV application. 2. Click “Next” button to start installing. 3. Please read the License Agreement and click “Next” to begin copying files. 9
Summary of the content on the page No. 10
ENUTV-2 User’s Guide - 4. Click “Next” or choose setup folder for installation. 5. Then click “Finish” to complete the installation of ENUTV-2. 6. Select the “Yes, I want to restart my computer now” and click the “OK” to restart your computer. 10
Summary of the content on the page No. 11
ENUTV-2 User’s Guide - Chapter 3: Launch the ENUTV-2 Program 3.1 Running the ENUTV-2 for the first time Click “Start”, move your mouse to “Programs\ENUTV-2\ENUTV-2” then click ENUTV-2 NOTE: When the ENUTV-2 Program is first started, it will prompt you to select your country and language: 1. Select the video signal format in your area (NTSC or PAL) from the “TV Tuner Standard” drop-down menu. 2. Click “Next” 11
Summary of the content on the page No. 12
ENUTV-2 User’s Guide - 3. This step will give you an option to scan for TV channels. Select which signal source you are connected to in the “TV Scan Type” line then click “Search”. There are two types of scans. 1. One is scan by TV channel table “Cable”, “Antenna” and “Extend” 2. One is scan by frequency that scans low frequency to high frequency. The “Auto” scan mode is not for the TV table order. 3.2 Watch TV programs or movies from DVD/VCR/Camcorder 6. Double click to full s
Summary of the content on the page No. 13
ENUTV-2 User’s Guide - When you do a full screen display, you can use the panel bar to set up your TV box. 1. Fix Panel: To fix the display panel. Show / Hide as mouse drags. 2. Hide Panel: To hide the sub-panel. 3. Snapshot: Same as "Snapshot" button of main panel. 4. TV Wall: To launch TV Wall function, same as "TV Wall" button, 5. Start / Stop Record: Record the current playing audio/video, same as "Start/Stop Record" of main panel. 6. Switch Next Channel: Switch to next channel, s
Summary of the content on the page No. 14
ENUTV-2 User’s Guide - 3.4 Snapshot Image Click the “Snapshot” button to capture still image. -2 Click the “Setting” button to setup the image format. ENUTV-2 supports BMP and JPEG image format. Please choose your desired format. 3.5 Playback Video Click the “Playback” button to Play the recording Video. -2 Click “Play List” button to select video file. Choose the video then click “open” button. 14
Summary of the content on the page No. 15
ENUTV-2 User’s Guide - Exit ： To exit the video playback window, press [Esc] or [ALT]+[F4] on keyboard Minimize ： To minimize the video playback window, click "MoviePlayer" in desktop taskbar to restore display Hide Control Panel ： To hide video control panel, right click video window and select "Control Panel" to restore display Setting ： Click to pop-up setting dialog, you can test the video playback; refer to "Playback Setting" page. Browse Image ： To launch image browse wi
Summary of the content on the page No. 16
ENUTV-2 User’s Guide - 3.6 Browse Image Click the “Browse Image” to retrieve the saved -2 pictures. You can use the “Browse Image” software to control picture zoom in/out, or rename. The top toolbar contains many function buttons for you to easily operate: Refresh ： To renew display snapshot image in current folder. Path Panel ： Show/Hide path panel on left of window, which is for you to easily browse and select folder. Image Panel ： Show/Hide image panel on left of window
Summary of the content on the page No. 17
ENUTV-2 User’s Guide - Chapter 4: Using the Remote Control The Remote control allows you to operate the ENUTV-2 program, such as turning the TV on or off, changing channel and volume, etc. Aim the upper front side of the Remote Control to the Remote Control Receiver as you would do on other infrared remote control. For default button assignments, please refer to the list below: Remote Control Default Settings: 1. Open or Close ENLTV Program. 2. Mute 3. Number keys. 4. Single or Doub
Summary of the content on the page No. 18
ENUTV-2 User’s Guide - Chapter 5: Technical Support: For Technical Support or Installation Hotline contacts please visit our web site at www.encore-usa.com 18
Summary of the content on the page No. 19
ENUTV-2 User’s Guide - NOTES: _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _________________
Summary of the content on the page No. 20
ENUTV-2 User’s Guide - NOTES: _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _______________________________________________________________________ _________________
