Summary of the content on the page No. 1
INSTRUCTION MANUAL
Before connecting, operating or adjusting this product,
read this instruction booklet carefully and
completely.
Summary of the content on the page No. 2
© 2004 CBC Co., Ltd. All rights reserved. First Edition (September 2004) COPYRIGHT No part of this document may be reproduced or distributed in any form or by any means without the express written permission of CBC Co., Ltd. (hereafter ‘CBC’). TRADEMARKS GANZ is a registered trademark of CBC Co., Ltd. ii
Summary of the content on the page No. 3
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK); NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Graphic Symbol Explanation This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Summary of the content on the page No. 4
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS INSTALLATION AND OPERATING GUIDE AND THOSE MARKED ON THE UNIT. RETAIN THIS GUIDE FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use, and servicing. This unit does not contain an
Summary of the content on the page No. 5
WARNING Pay attention to the following information before installing the GANZ ZR-DH1621NP. • Keep the product away from heat. Do not expose the product directly to the sun or heating apparatus. (becomes a fire hazard) • Do not leave vessels with water such as a vase, a flowerpot, a cup, which may cause fire or electric shock. • Do not insert or put metallic material (coin, hair pin, metal) or flammable materials (paper, matches) through vent holes. • Do not place heavy objects on the product.
Summary of the content on the page No. 6
vi
Summary of the content on the page No. 7
Contents 1 Parts and Features . . . . . . . . . . . . . . . . . . . . . . . . .1 1. 1 DVR System and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1. 2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 1. 3 Parts name and Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 2 Setup and Connections . . . . . . . . . . . . . . . . . . . . .7 2. 1 Power Setup . . . . . . . . . . . . . . . .
Summary of the content on the page No. 8
3. 4 Display Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 3. 4. 1 User Defined Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 3. 4. 2 Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 3. 4. 3 Spot Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 3. 4. 4 Transparency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 9
Appendix A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Factory Default Menu Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Appendix B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Recording Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Appendix C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Recording Time . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 10
x
Summary of the content on the page No. 11
1 Parts and Features 1. 1 DVR System and Accessories Appearance may vary. ZR-DH1621NP Rack Mount Brackets RS-485/422 Terminal Block Alarm Out Terminal Block Alarm In (2EA) Terminal Block CD-ROM Power Cord RJ-11 Cable & Terminal Block 1
Summary of the content on the page No. 12
1. 2 Features 10) Audio recording playback function 1) High quality digital recording Adjustable audio quality and compression Record and playback High-Resolution for added flexibility. digital video by using Wavelet compression and decompression circuitry. 11) Motion detection and event recording Digital motion detection and event 2) Simple user interface recording with pre and post alarm Simple operation by telemetry, integrated recording. buttons and jog shuttle/dial. 12) Search Function 3) H
Summary of the content on the page No. 13
1. 3 Parts name and Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 1) DISPLAY 6) PIP Toggles between 1, 4, 9, 16, 6, 8 and 7 split Picture-in-Picture mode allows to view live and screens. Enter PTZ on-screen menu in PTZ playback screens simultaneously. mode. 7) SEARCH 2) USER Playback by specific date and time or event. Enter user defined screen mode. Use the 8) Channels (1~16) DISPLAY button to toggle between 4, 9, 6, 7, 10, Select video channels in live, playback, PTZ a
Summary of the content on the page No. 14
11) MENU 16) Jog Shuttle/Dial Enter menu mode; exit sub-menus. Shuttle: Fast forward or rewind during playback. 12) PTZ/ENTER Dial: Slow forward/reverse playback in Enter PTZ mode; select or confirm menu pause. selection. 13) STOP Stops playback; reset alarms; hold down to select multiple cells in Recording Schedule. 14) R.PLAY, PLAY, FF, REW R.PLAY: Reverse Playback/Left PLAY: Playback/Right FF: Fast Forward/Up REW: Rewind/Down JOG DIAL Used to control Pan/Tilt JOG SHUTTLE 17) AUTO Sequenc
Summary of the content on the page No. 15
REAR 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1) PORT A (RS-422) 8) MONITOR Used for communicating with external Monitor output as composite signal. devices in full-duplex RS-422. 9) SPOT OUT 2) LAN Spot monitor output as composite signal. 10/100 Base-T ethernet connection. 10) AUDIO IN/OUT 3) PORT B (RS-422/RS-485) RCA terminals for audio recording and Used for communicating with external playback. devices in full-duplex RS-422 or half-duplex 11) POWER Switch RS-485 Main power switch. 4) ALARM IN 12)
Summary of the content on the page No. 16
6
Summary of the content on the page No. 17
2 Setup and Connections 2. 1 Power Setup 2. 2 Telemetry Connection Select power (AC 115V/AC 230V) by AC Multiple DVRs and keypads may be Selector according to input voltage. connected via RS-422 (PORT A). Up to two PTZ serial communication lines are • If set as figure 1, AC 115V is selected. supported via RS-485/422 (PORT A, PORT • If set as figure 2, AC 230V is selected. 1 & PORT 2). 2. 2. 1 PORT A RS-422 Figure 1 There are two RJ-11 connections for PORT A which can be used to “chain” the DVR w
Summary of the content on the page No. 18
2. 3. 2 ALARM OUTPUT 2. 3 Alarm Connections Connect up to 4 separate alarms to the 2. 3. 1 ALARM INPUT Alarm Output. Connect up to 16 alarm sensors using the Alarm may be triggered by numerous events supplied terminal blocks. including digital motion detection, Full Disk, Signal Loss, Power Off, Network Access. The signal state is adjustable to N/O (Normaly Open) or N/C (Normaly Closed). GND 1 2 3 4 5 6 7 8 GND 1 2 3 4 GND 9 10 11 12 13 14 15 16 Notice The internal switchin
Summary of the content on the page No. 19
2. 4 External Storage 2. 5 Connecting to LAN or Internet 2. 4. 1 Using USB memory device 2. 5. 1 Making physical connection Insert the memory device into the USB port. The system automatically recognizes the Connect the LAN port of the DVR to an device. available 10/100 Base-T port with a straight ethernet cable (not supplied). The link 2. 4. 2 Connecting CD-R/RW & HDD via USB indicator LED will be lit. Connect and power each USB device before 2. 5. 2 Automatic network configuration powering th
Summary of the content on the page No. 20
10
