Summary of the content on the page No. 1
RC207H-JM.NA1UJJB
DVD VIDEO RECORDER
DR-MV99BU
AUX
CHAPTER
- +
DVD VIDEO RECORDER
RM-SDR108U
For Customer Use :
Enter below the Model No. and
Serial No. which are located on the
rear of cabinet. Retain this
information for future reference.
Model No.
Serial No.
INSTRUCTIONS
LPT1151-001A
Summary of the content on the page No. 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) CAUTION: NO USER-SERVICEABLE PARTS INSIDE This product employs a Laser System. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future refer- ence. Should the unit require maintenance, contact This lightning flash with arrowhead symbol within an equilateral triangle is intended t
Summary of the content on the page No. 3
FCC WARNING: This equipment may generate or CAUTION concerning the Power Cord use radio frequency energy. Changes or modifica- Most appliances recommend they be placed upon tions to this equipment may cause harmful interfer- a dedicated circuit; ence unless the modifications are expressly approved in the instruction manual. The user could That is, a single outlet circuit which powers only that lose the authority to operate this equipment if an appliance and has no additional outlets or branch ci
Summary of the content on the page No. 4
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in elec- tric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the follow- ing procedures for installation, use, and servicing. This product does not contain an
Summary of the content on the page No. 5
INTRODUCTION RECORDING About DVD recording . . . . . . . . . . . . . . . . . .35 About the Symbol Display . . . . . . . . . . . . .6 Notes for recording . . . . . . . . . . . . . . . . . . . .35 Symbol Used in this Manual . . . . . . . . . . . . . .6 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .6 Recording time and picture quality . . . . . . .35 Moisture Condensation . . . . . . . . . . . . . . . . . .6 Basic Recording from a TV . . . . . . . . . . . . . .36 Recordable and Play
Summary of the content on the page No. 6
Introduction To ensure proper use of this product, please read Notes on Discs this owner’s manual carefully and retain for future reference. Handling Discs Do not touch the playback side of the disc. Hold the About the Symbol Display disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. “ ” may appear on your TV display during operation and indicates that the function is not permitted by this unit or specific media. Symbol Used in this Manual
Summary of the content on the page No. 7
Recordable and Playable Discs DVD-RW (DVD - ReWritable) DVD-RW discs can be formatted for VR mode recording or Video mode recording. These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc. [VR mode] Recordings can be extensively edited Playable only on VR mode compatible players (after finalization) [Video mode] Playable on regular DVD players (after finalization) Limited editing features DVD-R (DVD - Recordable) These Discs can be
Summary of the content on the page No. 8
Playable Discs DVD (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented Video CD (VCD) (8 cm / 12 cm disc) VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format Audio CD (8 cm / 12 cm disc) Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased CD-R/CD-RW (8 cm / 12 cm disc) CD-R/CD-RW discs that contain audio titles, MP3, WMA or JPEG files. Notes: • Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW
Summary of the content on the page No. 9
Restrictions on video recording •You cannot record copy-protected video using this recorder. Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording will pause or stop automatically and an error message will be displayed on-screen. •Video that is ‘copy-once only’ can only be recorded using a DVD-RW disc in VR mode with CPRM (see below). What is ‘CPRM’? CPRM is a copy protection system (with scramble syst
Summary of the content on the page No. 10
Front Panel ab c d - + e fgh i j k l mn o p Lights when the Recorder is in playing mode a Disc Tray (DVD deck) or flashes when search mode. Insert a disc here. The VCR deck is selected. VCR b Z OPEN/CLOSE Opens or closes the disc tray. Indicates when the recorder is in timer recording or a timer recording is c Cassette Compartment (VCR deck) programmed. Insert a video cassette here. A VHS tape is inserted in the VCR deck. d Z EJECT The Recorder is recording. Ejects the tape in the VCR deck.
Summary of the content on the page No. 11
Remote Control TV DASH (-) DISPLAY STANDBY/ON Enters a channel number for multiple Accesses On-Screen Display. channels such as 2-1, 2-2, etc. Displays information of current status. AUX RETURN (O) Changes the input to use for recording Removes the menu. (Tuner, AV1, AV2, or DV IN). a JVC TV Control Buttons d - TV STANDBY/ON: Turns the TV on or off. - INPUT: Selects the TV’s source. AUDIO Selects an audio language or an audio - CH +/–: Selects TV’s channel. channel. - VOL +/
Summary of the content on the page No. 12
Rear Panel ab c d e f ghijk l a ANTENNA IN (FROM ANT.) g ANTENNA OUT (TO TV) Connect the antenna to this terminal. Connect to a TV with ANTENNA coaxial inputs b OPTICAL (DIGITAL AUDIO OUTPUT) h COAXIAL (DIGITAL AUDIO OUTPUT) Connect to digital (optical) audio equipment. Connect to digital (coaxial) audio equipment. c COMPONENT OUTPUT (Y PB PR) i S-VIDEO OUTPUT Connect to a TV with Y PB PR inputs. Connect to a S-Video Input on TV. d INPUT 1 (VIDEO/AUDIO (Left/Right)) j AUDIO OUTPUT (Left/Right)
Summary of the content on the page No. 13
Hookup and Settings Depending on your TV and other equipment a there are various ways you can connect the Antenna Antenna recorder. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary for additional connection informa- tion. OR OR Notes: • Make sure the Recorder is connected directly to the TV and tune the TV to the correct video input channel. • Do not connect the Recorder’s AUDIO OUTPUT jack to the phono in jack (record deck) of your audio system. • Do no
Summary of the content on the page No. 14
Notes: Connections to your TV Connections to your TV • Set the resolution to 480p using OUTPUT STATUS but- Make one of the following connections, depending on ton on the front panel for progressive signal. the capabilities of your TV. • Progressive Scan does not work with the RF, Video or S-Video connections. RF coaxial connection • If your TV does not accept the Progressive Scan format, Connect the ANTENNA OUT jack on the Recorder to the picture will appear scrambled. the antenna in jack on the
Summary of the content on the page No. 15
HDMI compatible TV HDMI connection HDMI If you have a HDMI TV or monitor, you can connect it to this recorder using a HDMI cable. 1. Connect the HDMI OUTPUT jack on the recorder H to the HDMI INPUT jack on a HDMI compatible TV or monitor (H). 2. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). Notes: • If your TV is NOT capable of handling 96 kHz sam- pling frequency, set the [Sampling Freq.] option to [48 kHz] on the setup menu (See page 22). When this choice is made, this unit will
Summary of the content on the page No. 16
Connection to an Amplifier Connection to an Amplifier Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Rear of Recorder Logic Connect the Left and Right AUDIO OUTPUT jacks on the Recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system using the audio cables (A) supplied. Connecting to an amplifier equipped with two chan- nel digital stereo (PCM) or to an Audio/Video receiv- er equipped with a multi-channel decoder (D
Summary of the content on the page No. 17
Connecting a Digital Accessory Audio/Video (A/V) Connecting a Digital Accessory Audio/Video (A/V) Recorder Recorder Camcorder Camcorder Connections to Connections to Connect the INPUT 1 or AV IN 2 jacks on the Use a DV cable (not supplied) to connect the DV Recorder to the audio/video out jacks on your acces- in/out jack of your DV Digital Camcorder to the front sory component, using the optional audio/video panel DV IN jack of this Recorder. cables. (Refer to page 40 for [Recording from Notes
Summary of the content on the page No. 18
5. Enter the necessary information for year, date and Initial Setup Wizard Initial Setup Wizard time. After the STANDBY/ON is pressed for the first time to turn on the unit or after factory setting (See page 20), the Initial Setup Wizard function sets the Language, Channels and Clock step-by-step until the setup is complete. 1. Use v / V to select a language for the Setup menu and information display then press ENTER. b / B (left/right): Moves the cursor to the previous or next column. v / V (up
Summary of the content on the page No. 19
Easy Menu Using the Home Menu Using the Home Menu • Dubbing: Displays [Dubbing] menu. (See page From the Home Menu screen you can access all the 39) Media for playback and recording of the recorder. • Disc Manager: Displays Disc setup menu. (See 1. Press HOME and the Home menu appears. page 25) 2. Use b / B to select the desired main option. • Rec. Mode: Displays Record Mode setup menu. 3. Use v / V to select the desired Sub option then (See page 22) press ENTER to confirm your selection. •
Summary of the content on the page No. 20
4. Use v / V to select an option then press ENTER. General Settings General Settings [Add] Adds a unmemorized channel manually. Auto Channel Set [Delete] Deletes a memorized channel from channel list. A digital channel has multiple This recorder is equipped with a frequency channels, so if you delete the digital channel, synthesized tuner capable of receiving the analog all multiple channels will be deleted. and digital channels. [Skip On/Off] (for memorized digital channel only) Set the
