Curtis DVD2100 user manual

Summary of the content on the page No. 1

Summary of the content on the page No. 2

Safety Instructions Technical Specifications Technical Specifications Warning Symbol Danger Symbol The exclamatory point within The lightning flash with arrowhead an equilateral triangle is intended to alert the user to the presence of important Audio level:1.0~2.0 Vrms (10k ohm load) symbol within an equilateral triangle is operation and maintenance (servicing) intended to alert the user to the presence Frequency response: 4Hz~44KHz (2dB) instructions in the ma

Summary of the content on the page No. 3

Technical Specifications Table of Contents Basic Information Technical Specifications 5 Features the machine Supported disc 6 Terms DVD,DVD+R/RW, DVD-R/RW, SVCD, VCD, CD-DA, MP3, JPEG formats Front and Rear Panels 8 Remote Control 9 Supported recordable Installation and Use of Remote Control 10 DVD+R DVD+RW disc formats System Connections Connected to a TV 11 Connected to an ordinary stereo system 12 DVD MPEG-II Recording format Connected to an device with digital decoder 12 System connection

Summary of the content on the page No. 4

Appendix (Troubleshooting Guide) Table of Contents Erase Disc 22 Before contacting service personnel, please check possible causes according to the following instructions. Lock Disc 22 Rename Disc 23 Symptom Possible Cause Remedy Record a New Title 23 Overwrite Disc 23 1.Power supply not connected; 1. Connect to the power supply. 2.Bad contact between the power plug 2. Plug again or replace a receptacle. Finalize Disc 23 No Power and the receptacle; 3. S

Summary of the content on the page No. 5

Summary of the content on the page No. 6

Summary of the content on the page No. 7

Basic Information System Setup Audio Language Terms 1. In the Language Settings menu, use the or button to select the Audio Language item, and press the SELECT System Setup Language DVD disk button to drop down a menu, as shown in the following chart. DVD disk is a highly compact device for storing. The high quality audio and video information is 2. Use the or button to select the language you want and OSD Language English shored in it after being compiled in MPEG-II format.

Summary of the content on the page No. 8

Summary of the content on the page No. 9

Summary of the content on the page No. 10

Summary of the content on the page No. 11

Summary of the content on the page No. 12

Summary of the content on the page No. 13

Summary of the content on the page No. 14

Summary of the content on the page No. 15

Summary of the content on the page No. 16

Recording Mode Play Mode Introduction The Use of the GOTO Button There are various external signal inputs in the unit, including S-Video, composite video, TV tuning , DV input 1. In the playing status, press the GOTO button to cycle through various options in the play control bar menu. and stereo audio input. You can select any group of audio and video signals from these inputs for recording. With the above-mentioned operations, you can use the remote controller to enter the correspon

Summary of the content on the page No. 17

Summary of the content on the page No. 18

Summary of the content on the page No. 19

Summary of the content on the page No. 20