Havis-Shields Four Compartment Prisoner Transport Insert KK-100-07 user manual

Summary of the content on the page No. 1

KWIK KIT SPECIFICATIONS - MODEL KK-100-07
Four Compartment Prisoner Transport Insert

CHEVROLET STANDARD LENGTH CARGO VAN ONLY


GENERAL DESCRIPTION:
It is the intention of this specification to describe a conversion kit capable of installation into a full size Chevrolet cargo van
(non extended) wit

Summary of the content on the page No. 2

FRONT DRIVER SIDE COMPARTMENT: (SIDE ENTRY) Driver side forward compartment will be separated from the other three compartments by the center divider wall and a side separator partition. Separator partition will be attached to the divider and to the driver side of the Kwik Kit. The separator partition will be constructed the same as the front bulkhead. The separator must also include an emergency exit hatch (22” wide X 30” high) with two (2) heavy-duty slide bolts. (Padlocks to be provide

Summary of the content on the page No. 3

KK-C-VAK (VENT ADAPTOR KIT) (Ductwork kit that attaches to the O.E.M. Rear Heat / AC blower system) A kit will be provided to adapt the chassis O.E.M. rear heat and air conditioning system to the prisoner transport insert. The kit will include a plenum that attaches to the O.E.M. blower housing. From this housing there will be four (4) hose ducts connected to the ceiling of each prisoner unit. Each hose end will have a vandal proof vent guard positioned to provide an even flow of air