Summary of the content on the page No. 1
Insignia 10.2” Portable DVD Player, Model # I-PD1020, User’s Guide
TABLE OF CONTENTS
SAFETY PRECAUTIONS SETUP FUNCTIONS
Power Sources DVD and CD menus
Player Placement GENERAL SETUP
For Safety TV display
Lens and pickup maintenance SPDIF output
When using headphones Captions
IMPORTANT SAFETY INSTRUCTIONS Screen saver
INSIGNIA FEATURES Audio setup
WHAT’S WHAT Speaker setup
Player Dolby digital setup
Remote Control Equalizer
PLAYER CONNECTIONS 3D processing
AC adapter Passwo
Summary of the content on the page No. 2
SAFETY PRECAUTIONS • The lightning flash inside a triangle is intended to alert the user to the presence of "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute risk of electric shock. • The exclamation point inside a triangle is intended to alert the user to the presence of important operating and maintenance instructions. Read this manual carefully and keep it for future reference. WARNING: To reduce the risk of fire or electri
Summary of the content on the page No. 3
Where to place the player Avoid placing the product in the following places: In direct sunlight or near a source of heat such as a radiator or heat vent. In a closed automobile, on a dashboard or a parcel shelf. Excess heat may deform the product, causing it to malfunction. Where it is very dusty or sandy. Wet or humid places, such as bathroom. Near sources of strong magnetism, such as a television, speaker or magnet. Where there is movement or vibration, such as on
Summary of the content on the page No. 4
IMPORTANT SAFETY INSTRUCTIONS (1) Read these safety and operating instructions before operating the product. (2) Keep these safety and operating instructions in a safe place for future reference. (3) Strictly follow and adhere to all product warnings and instructions. (4) Unplug this product from the AC outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. (5) Do not use attachments that are not recommended by Insignia. They may cause hazards.
Summary of the content on the page No. 5
(19) Upon completion of any service or repair performed on this product, ask your service technician to complete a safety check to determine that the product is in proper operating condition. (20) The product should be kept away from heat sources such as radiators, heat registers, stoves or other products (including amplifiers) that produce heat. (21) During playback, a few bright or dark flecks may appear on the TFT LCD. This happens occasionally in active matrix displays, and does not
Summary of the content on the page No. 6
WHAT’S WHAT DVD Player (1) TFT LCD MONITOR (15) MONITOR AND Fast Rewind/Fast (2) SPEAKERS Forward (3) OPEN TRAY BUTTON (16) SOURCE* (4) REMOTE CONTROL SENSOR (17) FRAME SEARCH (5) POWER ON/BATTERY CHARGING (18) VOLUME INDICATOR (19) PHONES 1 (6) PLAY (20) PHONES 2 (7) PAUSE (21) VIDEO OUT (8) STOP (22) AUDIO/OPTICAL OUT (9) DIRECTION BUTTONS (23) S-VIDEO OUT (10) ENTER (24) AV IN (11) RETURN (25) COMPONENT VIDEO/PROGRESSIVE (12) FF SEARCH SCAN OUT (13) MENU (26) DC IN (1
Summary of the content on the page No. 7
Remote control buttons and functions (1) OSD (ON SCREEN DISPLAY) BUTTON (14) PREV/NEXT SKIP (2) SUBTITLE (15) STOP (3) PLAY MODE (16) RETURN (4) AUDIO MODE (17) ZOOM (5) RESUME (18) A-B REPEAT (6) DIGEST (19) REPEAT (7) TITLE (20) MENU (8) PLAY (21) CLEAR (9) DIRECTION BUTTONS (22) TIME SEARCH (10) SETUP (23) NUMBER BUTTONS (11) SLOW PLAY (24) LANGUAGE (25) ANGLE (12) PAUSE (13) FF/FR SEARCH (26) REMOTE TRANSMITTER - 7 -
Summary of the content on the page No. 8
PLAYER CONNECTIONS AC adapter (A) The player can operate or charge batteries using the supplied AC adapter. 1. Insert the DC adapter cord into the player’s DC IN jack. 2. Insert the AC adapter into an AC wall outlet. The POWER ON/BATTERY CHARGING INDICATOR light will appear, and the product is ready for use. Note: Turn off the product before unplugging the AC adapter to avoid damage. Headphones (B) 1. Insert headphone plug into one of the two headphone jacks. 2
Summary of the content on the page No. 9
Connecting to a TV using composite video (C) 1. Connect the mini plug to the VIDEO/AUDIO jacks on the product. 2. Connect the yellow RCA plug to the VIDEO IN jack on the TV. 3. Connect the red RCA plug to the AUDIO IN R jack on the TV. 4. Connect white RCA plug into the AUDIO IN L jack of the TV. Connecting to a TV using component/progressive scan video (D) 1. Connect the Mini-plug of the component video cable to the COMPONENT VIDEO/PROGRESSIVE SCAN OUT jack of the unit. 2
Summary of the content on the page No. 10
BEFORE YOU BEGIN Using the remote control 1. Install batteries. Open the remote control battery compartment, insert batteries, and close the compartment, as in illustration. 2. When using the remote control, point it at the remote sensor on the front of the player. The remote’s range is 5 meters (16 feet), with a 60° acceptance angle. 3. Batteries last for about one year. If the remote control does not work, replace the batteries. 4. Remove the batteries if remote control will not
Summary of the content on the page No. 11
BASIC OPERATIONS 1. Press the lock switch to open the cabinet cover. 2. Turn the power on using POWER ON switch. 3. Adjust audio level (including headphones) using VOLUME control. 4. When connecting the player to a TV or an amplifier, adjust the volume according to the TV owner’s manual. Set TV to AV mode. Loading discs 1. Press OPEN to open the disc tray. 2. Hold the edges of the disc and place it in the center of the tray with the printed side up. 3. Close the disc tray c
Summary of the content on the page No. 12
Adjusting the picture 1. Press MONITOR button to select brightness adjustment and press + or - buttons to select the preferred brightness level. 2. Press MONITOR button again to select the color adjustment and press + or - buttons until the preferred color is set. 3. Press MONITOR button again to select display mode and press + or - buttons to select NORMAL/PS, NORMAL/LB, or FULL picture display mode. Note: During playback, a few bright or dark spots may appear on the TFT LCD. This
Summary of the content on the page No. 13
ON SCREEN DISPLAY (OSD) The On Screen Display (OSD) controls DVD playback features. To see the OSD, press the (OSD) button on the remote control while a DVD disc is playing. The OSD appears across the top of the screen. Each feature is illustrated with an icon. Use the (LEFT) or (RIGHT) buttons on the remote to select functions. When an icon (and function) is highlighted, use (UP) or (DOWN) buttons to scroll through the choices, which will be displayed in the text box just under the
Summary of the content on the page No. 14
Selecting a DVD chapter Because DVD discs use digital technology, a title can be divided into individual chapters (similar to tracks on a CD). You can skip to any chapter by using the Chapter feature in the OSD. 1. While the disc is playing, press OSD on the remote to bring up the Display. 2. Press the (RIGHT) or (LEFT) buttons to highlight the Chapter icon. 3. Press the (UP) or (DOWN) buttons to go to the next or previous chapter. 4. Press (OSD) again to hide the display. Note:
Summary of the content on the page No. 15
Selecting CD tracks using number buttons While a disc is playing, use the number buttons to select tracks. 1. If the track number is less than 10, simply press a 1-10 number button. For example: push 8 to select track 8. The screen shows: 2. If the track number is over 10, press +10 and then press a 1-10 number button. For example: To select track 12 press +10 once and number button 2 once. The screen shows: - 15 -
Summary of the content on the page No. 16
BASIC SETTINGS Changing the audio language If a DVD disc was created with additional audio language tracks (tracks recorded in different languages), you can use the OSD to temporarily change the player’s Audio Language setting. 1. While the disc is playing, press (OSD) on the remote to bring up the Display. 2. Press the (BACK) or (PLAY) buttons to highlight the Audio icon. The current audio language appears in the text box below the row of icons. 3. Press the (UP) or (DOWN) butt
Summary of the content on the page No. 17
Setting title time You can skip to a specific title time by using the Title Time feature in the OSD. 1. While the disc is playing, press OSD on the remote to bring up the Display. 2. Press the (UP) or (DOWN) buttons to highlight "TT (Title) Time". 3. Press the (PLAY) button, the text box by the right side is now highlighted. 4. Use the number buttons on the remote to enter a title time that you want to play. Setting chapter time You can skip to a specific chapter time by using
Summary of the content on the page No. 18
Playing a CD CD discs have the following playback features: Track, L/R, Audio (not available) and Repeat. Selecting a Specific Track 1. While the CD disc is playing, press (OSD) to bring up the Display. 2. Highlight the Track icon you’d like to play. 3. Press the (UP) or (DOWN) buttons to scroll through the track numbers. Setting Disc Time You can skip to a specific disc time by using the Disc Time feature in the Display. 1. While the disc is playing, press OSD on the remot
Summary of the content on the page No. 19
SETUP FUNCTIONS DVD & CD menus You might like to customize player functions to enjoy the best results for your equipment and discs. Here’s what to do: 1. Press SETUP to set the main menu. The main menu appears on the screen. Icons across the top of the screen indicate setup options: General Setup, Audio Setup, Preferences, Password Setup, and Exit. The screen looks like this: 2. Press direction (UP) or (DOWN) buttons to select an option, then press (PLAY) to confirm.
Summary of the content on the page No. 20
Press direction button (RIGHT) and then (DOWN) to select “Left Mono”. The screen will look like this: Press (PLAY) to confirm your selection. In “Dolby Digital Setup,” you have just set “Dual Mono” to “Left Mono”. The screen shows: 3. Exit the setup menu. Press the (LEFT) button to exit from “Dual Mono”. Press the (LEFT) button to exit from “Dolby Digital Setup”. Press the (DOWN) button to highlight “Main Page” and press (PLAY). The screen shows: - 20 -
