Summary of the content on the page No. 1
DVD HOME THEATER SYSTEM
R
JPG
VCR
FILES
OWNER'S MANUAL
Summary of the content on the page No. 2
Important Safety Instructions The lightning flash with an arrowhead symbol, within WARNING the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within the equilateral triangle is WARNING: TO REDUCE THE RISK OF ELECTRIC intended to alert the user to the presence of important SHOCK, DO NOT REMOVE COVER (OR BACK). NO operating and
Summary of the content on the page No. 3
Important Safety Instructions 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Water and Moisture - The appliance should not be used near water
Summary of the content on the page No. 4
Table of Contents CD programmable memory ................................... 26 Important Safety Instruction ..................... 1-2 Track programmed playback .......................... 26 Disc Formats ................................................ 4 Repeat Playback ................................... 27-28 Before You Start ........................................... 5 Repeating a title/chapter (DVD) ............................ 27 Using the remote control ..................................
Summary of the content on the page No. 5
Disc Formats The Unit can playback. DVDs [8cm(3")/12cm(5”) disc] Compatible Audio CDs [12cm(5”) disc] Region Management Information Region Management Information: This Unit is designed and manufactured to respond to the Region Management Information that is encoded on DVD discs. If the Region number printed on the DVD disc does not correspond to the Region number of this Unit, this Unit cannot play that disc. 1 The region number of this Unit is 1. Disc Function or Operation that is Not Available
Summary of the content on the page No. 6
Before You Start Using the Remote Control • Point the Remote Control at the REMOTE SENSOR located on the Unit. • When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR may be degraded, causing unreliable operation. • The recommended effective distance for remote operation is about 16 feet (5 meters). To install Batteries 1.Open the battery door. 2.Insert two "AA" or UM-3 size batteries. Battery Replacement When batteries become weak, the operating distance of
Summary of the content on the page No. 7
Parts and Functions Front Panel 12 35 4 67 21 8 20 9 10 19 18 17 16 15 14 13 12 11 1) POWER button 11) DISPLAY button Turn the power on or off. 12) AV2 button 2) 5 Disc tray 13) SKIP/SEARCH buttons Open or close tray by pushing OPEN/CLOSE button. Press SKIP/SEARCH button to go back to previous Place discs on the disc trays, label side up. chapters/tracks. 3) Display window Press SKIP/SEARCH button to advance to chapters / tracks. Press and hold SKIP/SEARCH Display system information. butto
Summary of the content on the page No. 8
Parts and Functions Rear Panel 22 23 31 L R 30 29 L R 28 27 26 25 24 Sub-Woofer Front Panel Rear Panel 39 32 33 34 35 36 37 38 22) AM LOOP ANTENNA terminal 31) AUDIO IN (L/R) jacks (AV1) 23) FM ANTENNA jacks 32) Front speaker (R) terminals 24) Power cord 33) AUDIO IN 5.1CH jack 25) DIGITAL AUDIO OUT jack 34) Rear speaker (R) terminals 26) AUDIO OUT jack (SUB-WOOFER) 35) Center speaker terminals 27) S-VIDEO (DVD) output jack 36) Rear speaker (L) terminals 28) VIDEO OUT jack 37) Front speaker (L)
Summary of the content on the page No. 9
Parts and Functions Remote Control 1) Power button Turns the Unit on and puts it in standby mode. 2) RETURN button O PEN / CLOSE Return to the normal operation after using the SETUP FU NC TIO N RETURN menu. 1 3) Number (0 - 9) and (+10) buttons GOTO 2 Use when creating programs, and entering a parental level password. To select numbers over 9, press +10 button and then the second no. for example, to enter 18, press +10 and then 8. 3 4) 5.1 Ch button Switch speaker output to 5.1 channel mode. (Al
Summary of the content on the page No. 10
Parts and Functions Remote Control 19) FUNCTION button 19 Display the FUNCTION screen where you can check O PEN / or change various setting. CLOSE 20) OPEN / CLOSE button RETURN FU NC TIO N 20 Use to open or close the disc tray. 21) GOTO button GOTO 21 Skip directly to a specific location on a DVD disc. 22) 2.1 CH button Switch speaker outputs to 2.1 channel. (Front left/ 22 right speakers + subwoofer) 23) SOUND button 23 MEMO RY 5.1 CH 2.1 CH SOUND Selects sound balance and tone controls for ad
Summary of the content on the page No. 11
Display Front Panel Display CD indicator REPEAT 1 playback indicator Displayed during repeat Displayed during playback. CD playback. TUNER indicator STEREO indicator Displayed during TUNER Tune into a station. "((ST))" will appear mode. when an FM broadcast is in stereo. Disc holder indicators The number will blink when a certain disc is playing. Main display section Indicates the operation status of the disc and Unit. Display Information The DVD displays the information shown below on the TV sc
Summary of the content on the page No. 12
Setup AM(MW) LOOP For better reception ANTENNA (SUPPLIED) FM FM antenna Connect FM antenna (included) to the FM ANTENNA jacks. L R AM Connect the loop antenna (included) to the AM LOOP L R ANTENNA terminals. To wall outlet A.Connecting your TV DVD Unit The Unit can be connected to your TV in several different ways, L depending on the design of your TV. TV RCA Audio/Video Jacks R VIDEO IN Use the included Audio/Video To AUDIO OUT (white) cable. 1. Connect the VIDEO OUT and left/ AUDIO IN right A
Summary of the content on the page No. 13
Setup B. Connecting a VCR 1.Using the supplied Audio/Video cable, connect the yellow plug from VIDEO OUT jack on your Unit to VIDEO IN jack on your TV, connect the left and right AUDIO OUT jacks on your Unit to AUDIO IN jacks on your TV. If you want the sound come from the speakers of the Main Unit, you need not to connect these left and right Audio cable from the Main Unit to your TV. 2. Using the Video cable (not supplied), connect the VIDEO IN (VCR) jack on your Unit to VIDEO OUT jack on you
Summary of the content on the page No. 14
Setup C. Connecting another source Using the supplied Audio/Video cable, connect ONLY the left and right AUDIO OUT jack on your Unit to the AUDIO IN jack or use a coaxial digital Audio cable (not supplied) to connect to the coaxial in jack on your another equipment. Do not connect the yellow video plug. Listening to another audio equipment 1.Turn on the Unit. 2.Turn on your audio equipment and follow the instructions included with it to select the AUDIO IN or DIGITAL IN function. Analogue connec
Summary of the content on the page No. 15
Setup D. Connecting the speakers & subwoofer 1. The speaker cords have been color-coded to simplify connection. Just plug the POSITIVE (+) and NEGATIVE (-) ends of each speaker wire into the corresponding jacks on the rear of the subwoofer, matching the color tube on the end of the speaker wire to the color-coded connector. 2. Connect each of the speaker wires to the satellite speakers. The front left/right and rear left/right speakers are all the same. However, make sure you connect to the cent
Summary of the content on the page No. 16
Setup E. Positioning the speakers and subwoofer CENTER Place on the top of CENTER FRONT or below the TV. LEFT FRONT RIGHT FRONT SPEAKERS Place on both sides of the TV, SUB- equal distances apart. REAR WOOFER LEFT SUBWOOFER Can be placed anywhere. REAR RIGHT REAR SPEAKERS Place right beside or slightly behind your listening position, and a little higher than your ears. (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) E -
Summary of the content on the page No. 17
Setup Mounting rear surround speakers 1) Mark the correct mounting position on the wall. 2) Insert a fixing screw(s) at the marked position on the wall. 3) Align the slot hole(s) of the speaker over the screw and pull the speaker downward until it is firmly hooked. Need More Help? DO NOT RETURN THIS TO THE STORE Please call Customer Service at 1-800-252-6123 or visit online help at http://www.18002526123.com Turning on the Unit and TV 1)Press the POWER button to turn the Unit ON, or 2)Press the
Summary of the content on the page No. 18
Adjusting the Sound To adjust the surround sound balance while Pro Logic decoding is in effect Use the remote control to make the following changes to speaker balance: Front speaker (left) • Press the SOUND button repeatedly to display LEFT, then press the or CURSOR button to adjust the sound level. It will show on the display of the Unit. Front speaker (right) • Press the SOUND button repeatedly to display RIGHT, then press the or CURSOR button toadjust the sound level. It will show on the
Summary of the content on the page No. 19
Adjusting the Sound To select the listening channel 1.When the disc is stopped, you can press 5.1 CH and 2.1 CH buttons on the remote control to select different speakers output status shown as below table. 2.At AV_IN function mode, you also can press the PRO LOGIC button repeatedly on the remote control to select 3 STEREO, PRO LOGIC (indicator on the front panel will illuminate) or OFF three different speakers output status, Details please refer to below listed table. 3.You can active or off
Summary of the content on the page No. 20
DVD CD Playing a Disc Basic playback This owner’s manual explains the basic instructions of this DVD Unit. Some DVD discs are produced in a manner that allows specific or limited operation during playback. As such, the DVD Unit may not respond to all operating commands. This is not a defect in the DVD Unit. Refer to the instruction notes of discs. “ ” may appear on the TV screen during operation. A “ ” means that the desired operation is not permitted by the DVD Unit or the disc. Playing a Dis
