Summary of the content on the page No. 1
SD4200KU
SDK790KU
Owner’s Record
The model number and serial number are on the back
of your DVD Player. Record these numbers in the spaces
below Refer to these numbers whenever you
communicate with your Toshiba dealer about this DVD
Player.
Model number:
Serial number:
Summary of the content on the page No. 2
English Introduction SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated 'dangerous voltage' within the product' s enclosure that may be of sufficient magnitude to constitute a risk of CAUTION: VISIBLE LASER RADIATION WHEN electric shock to persons. OPEN. DO NOT STARE INTO BEAM. The exclamation point within an equila- teral triangle is intended to alert the user to the presence of imp
Summary of the content on the page No. 3
Introduction 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience rec
Summary of the content on the page No. 4
English Introduction CAUTION! WARNING: Do not use solvents such as benzene, thinner, RISK OF ELECTRIC SHOCK! commercially available cleaners, or anti-static sprays intended for analog discs. Since the optical unit Never attempt to service this product yourself. (laser) of the DVD system operates at a higher Opening and removing the covers may expose you power than regular DVD or CD players, cleaning to dangerous voltage or other hazards. Failure to
Summary of the content on the page No. 5
Introduction Discs that can Region be played U.S.A. and Canada regions ALL 1 U.K., Europe regions and ALL 2 Japan Asia Pacifi c, Taiwan, Korea ALL 3 Australia, New Zealand, ALL 4 Latin America Russia and India regions ALL 5 China, Calcos Islands, Walls and Futuna ALL 6 Islands This product incorporates copyright protection tech- nology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights ow
Summary of the content on the page No. 6
English Introduction Table of Contents Introduction SAFETY PRECAUTIONS 1 IMPORTANT SAFETY INSTRUCTIONS 1-2 Setup 3 Cleaning discs 3 Moisture Condensation 3 Region Codes 3-4 Table of Contents 5 Connections Connecting to television 6 Connecting to a Stereo System 7 Connecting to a Digital AV Receiver 7 Connecting the power cord 8 Product Overview Front and Rear panels 9 Remote Control 10 Getting Started Inserting Batteri
Summary of the content on the page No. 7
Connections IMPORTANT! -The progressive scan video quality is only Connecting to television possible when using Y, PB, PR and a progressive scan TV is required. A Use the component video cables (red/blue/green) to IMPORTANT! connect the DVD player' s Y, PB, PR jacks to the – You only need to make one video connection corresponding Component video input jacks (or from the following options, depending on the labeled as Y, Pb, Pr) on the TV (cable not supplied). capabilities of you
Summary of the content on the page No. 8
English MAINS Connections Connecting to a Stereo System Connecting to a Digital AV Receiver Stereo system has Dolby Pro Logic or Right/Left Receiver has a PCM, Dolby Digital or MPEG Audio In Jacks decoder A Select one of the video connections (CVBS VIDEO IN A Select one of the video connections (CVBS VIDEO or COMPONENT VIDEO IN) IN or COMPONENT VIDEO IN) depending on the options available on your TV. depending on the options available on your TV. B Connect the COAXIAL jack of
Summary of the content on the page No. 9
Connections Connecting the power cord After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on. Helpful hint: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet. English
Summary of the content on the page No. 10
English Product Overview Front and Rear panels I/2 ON/STANDBY -Turns the player on or switches it to Disc tray standby mode - Place a disc here B/X PLAY/ PAUSE -Starts or pauses playback çOPEN/CLOSE - Opens or closes the disc tray STOP - Stops playback Display - Shows information about the current status of the IR Sensor DVD Player - Points the remote control towards this sensor MAINS ~ - Connects to a standard AC outlet AUDIO OUT (Left/Right) - Conn
Summary of the content on the page No. 11
Product Overview Remote Control See the page in [ ] for details. [ 15 ]DISPLAY REMOTE SIGNAL EMITTER -Displays information on [ 11 ] TV screen during playback -Point remote control to the sensor on the front panel 2 [ 11, 13 ] [ 13 ]OPEN/CLOSE ON / STANDBY -Open/close the disc tray -To switch the DVD player to ON or standby mode [ 13, 15, 19 ]Number Buttons -Selects numbered items in a menu [ 15 ] T - SEARCH -Press to enter track/chapter/title -Start playback from a designated numbers
Summary of the content on the page No. 12
English Getting Started and highest channels and may be called FRONT, A/V IN or VIDEO. See your TV' s manual for more Inserting Batteries details. Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel. Or, the TV remote control may have a button that chooses different video modes. Or, set the TV to channel 3 or 4 if you are using an RF modulator. C If you are using external equipment, (such as audio system or re
Summary of the content on the page No. 13
Getting Started/Playback from disc G Press to highlight { Yes } and press OK to confirm. on the disc, the disc’s default language will be used instead. The reconfirmation menu will appear on the TV. Video Out OSD language : English Language Confirm again to use new setting Subtitle : Auto 14 Seconds Video English Audio DVD Menu French Audio Yes No Spanish Rating H Press to highlight { Yes } and press OK to c
Summary of the content on the page No. 14
English Playback from disc/Playback Feature – For DVD+R and DVD+RW multi border, both Video CD finalized and unfinalized disc cannot be supported. (Formats 1.0, 1.1, 2.0) Starting disc playback Super Video CD A Turn on the TV and select the video input connected MP3-Disc to the DVD player. B Press I/2ON/STANDBY to turn on the DVD player. is a trademark of DVD Format/Logo Licensing C Press OPEN/CLOSE to open the disc tray. Corporation. D Place a disc onto the disc tray with
Summary of the content on the page No. 15
Playback Feature Stopping playback ybac Operations for video playback (DVD/ VCD/SVCD) A During playback, press STOP . The DVD player memorises the stopped point. Press PLAY/ PAUSE to resume playback from the Using the disc menu location where you stopped playback. If you press STOP again, the DVD player will Depending on the disc, a menu may appear on the cancel the resume function. TV screen once you load in the disc. Tips: To select a playback feature or item -Screen s
Summary of the content on the page No. 16
English Playback Feature -Repeat Single (currently playing file) B Use the number buttons ( 0-9 ) to input a valid -Repeat All (current folder) number or time ("0" cannot be input as the first -Off (cancel) number). (This function only apply to DVD/VCD/CD/ SVCD.) Tip: C Press OK to confirm. -For VCD2.0/SVCD discs, repeat playback is not The playback skips to the selected title/chapter/ possible if the PBC mode is turned on. track/time. Repeating a section within a
Summary of the content on the page No. 17
Playback Feature C Select Add To Program in the toolkit then press OK. ' √ ' will disappear from screen. It means that the Playing MP3/JPEG/ Kodak picture CD files/tracks you have selected already added into the Program View list. D Select Program View in the toolkit then press OK to IMPORTANT! open the file/track in the Program View list that you You have to turn on your TV and set to already selected in step B. the correct Video In channel. (See page E Press PLAY / PAUSE to play
Summary of the content on the page No. 18
English DVD Menu Options another automatically. See page 18 for JPEG Interval you selected. A prior subtitle language may be setting. programmedon the disc. Press PREV / NEXT to view the previous -SomeDVD video discs allow youto change subtitle or next thumbnail screen. selectionsonly via the disc menu. Ifthis is thecase, pressthe MENUbutton and choosethe appropriate Zoom picture ( JPEG) subtitlelanguage fromthe selection
Summary of the content on the page No. 19
DVD Menu Options C If you select { Personal }, then proceed to steps View Mode D~G. Use view mode to scale an image that fits to the TV The setup menu appears. screen's width and height. 0 A In ' Video ', press / to select { View Mode }, Brightness 0 then press . Contrast 0 { Fill } Tint
Summary of the content on the page No. 20
English DVD Menu Options { On } B Press / to select { Audio }, then press . If your amplifier / decoder is not compatible with 96 C Press / to select an item, then press to KHz PCM, select “ On “ . Sound recorded at 96 KHz access. is down sampled to 48 KHz. Example: { Night Mode } B Use / to select a setting and press OK to The options for the selected item appears. confirm. If the selection in the menu is greyed out, that Tip: means the feature is not avail
