Summary of the content on the page No. 1
Summary of the content on the page No. 2
TABLE OF CONTENT 1. INSTALLATION GUIDE ........................................................................................................... 3 2. FUNCTION KEYS ...................................................................................................................... 4 2.1 FRONT PANEL OF FUNCTIONS ............................................................................................................ 4 3. MONITOR TROUBLE SHOOTING ..........................................
Summary of the content on the page No. 3
1. INSTALLATION GUIDE 1. On a towel or soft cloth, gently place the monitor unit "facedown" on a stable work surface. 2. Locate the pigtail with the DIN connector. 3. Connect the DIN connector to the interface cable provided. 4. Connect the RED wire to the positive (+) battery terminal. 5. Connect the Black wire to a chassis electrical ground point. 6. Connect the cable with YELLOW RCA jack to Video Input sources for your Video Program material. 7. Connect the cable with RED and WHITE RCA jacks
Summary of the content on the page No. 4
2. FUNCTION KEYS 2.1 FRONT PANEL FUNCTIONS POWER: Press the "POWER" button once, To "POWER ON." Press it again, to "POWER OFF." MENU: Press MENU to Display OSD. Press again to exit MENU. When in sub-menus, press "MENU" to return to the main MENU UP/DN: Use to make item selection in OSD menus and to increase/decrease selection parameters. 3. MONITOR TROUBLE SHOOTING 3.1 NO POWER 1. Make sure the power cable has been pluged in. 2. Check power source for +12V. 3.2 REMOTE CONTROL NOT FUNCTIONING
Summary of the content on the page No. 5
4. SPECIFICATIONS ITEM DESCRIPTION LCD Panel: 15.3" TFT 16:9 Active Area 334.08 (W) x 200.448 (H) mm Resolution: 1280(H) x 3(RGB) x 768(V) Display Colors: 262,144 colors Pixel Pitch (mm): 0.261 (H) x 0.261 (V) mm Backlight Unit CCFL Side-light type (two lamp) Contrast Ratio: 300:1 Brightness (cd/m2): 300 Power Supply: DC12V+10% less than 1.6A Viewing angle: Horizontal: 60° (typ.,left side) , 60° (typ.,right side) Vertical: 40° (typ.,up side) , 60° (typ.,down side) IR
Summary of the content on the page No. 6
6. TYPES OF DISCS PLAYABLE ON THIS PLAYER • The discs listed on the table below can be played on this player without an adapter. • The marks shown on the table below are indicated on the disc’s label, package or jacket Types of playable Diameter/playable sides Playback time Discs and their marks DVD video MPEG2 format: 12cm/single- 1 layer 133minutes (4.7GB) Sided 2 layer 242minutes (8.5GB) DVD video 2cm/double- 1 layer 266minutes (9.4GB) Sided 2 layer 484minute
Summary of the content on the page No. 7
7. PART NAMES AND FUNCTIONS 7.1 Remote Control Unit - Main Buttons 6. STOP Button Press this button to stop playback of the picture or sound. 7. STEP Button Press this button for step-by-step playback. 8. TITLE Button Press this button to display the DVD’s title. 9. UP Button Press this button to increase value. 10. MODE Button Press this button to switch LCD mode: Monitor, Brightness, Color, Reverse. Then press / to adjust: Monitor: Screen size--16:9 or 4:3 Brightness: Level 0 to Lev
Summary of the content on the page No. 8
7.2 Remote Control Unit - Other Buttons 8. PROGRAM Button Use this button to program individually. 9. SLOW Button Press this button to slow playback at 1/2,1/4,1/6 speed. 10. REPEAT Button For DVDs, use it to play title or chapters repeatedly. For CDs, use it to play tracks or the entire disc repeatedly. 11. A-B Button Press it during playback to set Point A and Point B and then the program between Point A and B can be played repeatedly. 12. MUTE Button Press the button during playback to stop
Summary of the content on the page No. 9
8. PLAYBACK FUNCTIONS 8.1 Loading Disc 1. Push to insert the disc 2. If no power supply, the disc will not be inhaled. Notes: • Do not use cracked or warped discs. Doing so could result in damage. 1 • Set the disc securely. Failure to set it securely could result in damage. • Set single-sided DVDs or CDs with the label sidefacing upwards. 3. The disc will be automatically inhaled. 3 8.2 Playing Disc Loading the disc • One of the following messages appears on the LCD: DVD, VCD, CD. • For
Summary of the content on the page No. 10
8.6 PAUSING THE DISC Press the PLAY/PAUSE button. Press the button again to resume playback. 8.7 Scanning Forward And Backward During playback, press the PRE or NEXT button. Reverse direction. Forward direction 8.8 RETURNING TO THE PREVIOUS CHAPTER OR TRACK OF DVDS, VIDEO CDS AND CDS Press the PRE button during playback. When pressed, playback returns to the beginning of the previous chapter or track. 8.9 MOVING AHEAD TO THE NEXT CHAPTER OR TRACK OF DVDS, VIDEO CDS AND CDS. Press the NEX
Summary of the content on the page No. 11
9. VARIOUS LANGUAGE AND SUBTITLE SETTINGS Disc Setting Select "DISC SETTING" by using the " / " button on the remote control unit, then press ‘ENTER’ button to enter the DISC SETTING menu. Disc Setting Menu 10. SETTING THE PARENTAL LOCK LEVEL Select ‘Parental’ by using " / " button on the remote control unit, then press ‘ENTER’ to enter the submenu. Rating Setting Screen Note: To avoid the possibility of others using the default password to set the parental level and change the pa
Summary of the content on the page No. 12
11. OTHER SETTING 11.1 Video Setting Select "VIDEO SETTING" by using " / " button on the remote control unit, then press ENTER button to enter the VIDEO SETTING screen. Disc Setting Menu 11.2 Dolby Digital Setting a) Select "DOLBY DIGITAL" by using " / " button on the remote control unit, and then press ENTER to enter the submenu. b) Select the desired Dolby Digital Playing Mode either PCM or BITSTREAM to your choice by using " / "button on the remote control unit, then
Summary of the content on the page No. 13
Display Setting Menu 12. ADVANCED FUNCTIONS 12.1 Search For A Specific Scene 1. Press the SEARCH button. 2. Press the numeral button to select specific time or title/chapter. 3. Press the ENTER button and playback starts from the specific chapter number. 12.2 Viewing In Slow Motion DVDs And Video CDs Press the SLOW button during playback, the playback speed becomes 1/2, 1/4, or 1/6 of the normal speed each time you press the SLOW button. 12.3 Repeat Play DVDs, Video CDs And CDs • Repeat A TI
Summary of the content on the page No. 14
13. CAUTIONS ON USE 13.3 Cleaning Discs 13.1 Handing Fingerprints or dust on discs may reduce When holding with both hands sound or picture quality. • Do not use damaged (cracked or warped) discs. Do not use benzene, thinner or other • Do not scratch signal surface or let it volatile chemicals. get dirty. Do not use record spray or an antistatic spray either. 13.4 Irregularly shaped discs Irregularly shaped discs (heart-shaped discs, hexagonal discs, etc.) cannot be played o
Summary of the content on the page No. 15
14. TROUBLE SHOOTING Picture Disturbed When A DVD Is Recoded On A VCR Or Played Via A VCR ➔ This player is compatible with analog copy protect type copy guard. Some discs include copy prohibit signals. Such discs will not play properly when played via a VCR when recoded on a VCR. Play Cannot Be Operated With The Remote Control Unit ➔ Remote control unit is too far from the main unit or at too strong an angle with respect to the remote sensor. ➔ Remote control unit’s battery is worn out. TV & Oth
