Summary of the content on the page No. 1
DVD PLAYER
DV-626D
Operating Instructions
Summary of the content on the page No. 2
Summary of the content on the page No. 3
CONGRATULATIONS ON YOUR PURCHASE OF CAUTION THIS FINE PIONEER PRODUCT. • Use of controls or adjustments or performance of Pioneer is on the leading edge of DVD research for procedures other than those specified herein may consumer products and this unit incorporates the latest result in hazardous radiation exposure. technological developments. • The use of optical instruments with this product We are sure you will be fully satisfied with the DVD will increase eye hazard. player. Thank you for yo
Summary of the content on the page No. 4
Features of This Player State of the art digital audio and video Compatible with DVD, Video CD R and CD formats 1 DVDs, Video CDs and CDs that display the logos shown Compatible with a wide range of digital audio below can be played back on PIONEER DVD players. For more information on discs compatible with this player, output formats refer to the table below. DVDs are recorded in one of four types of digital audio formats (as of October 1998). The digital audio output jacks of this player can ou
Summary of the content on the page No. 5
HOLA Easy setup and adjustment using Wide range of DVD viewing options on-screen menus Multi-Language Subtitles (page 36) Press SETUP on the remote control to open the Setup You can select a subtitle language or turn subtitles off screen and you’ll find setting up and adjusting the when watching movies or other media with subtitles system easy to do with on-screen menus conveniently available. organized and arranged. Additionally, on-screen information ( i ) appears to clarify the functions and
Summary of the content on the page No. 6
Differences in Disc How to Proceed in This Composition Manual DVD is an incredible format that presents the highest quality digital audio and video available today. Because DVD using the DVD player and DVDs may be confusing at DVDs are divided into units referred to as titles, and first, following the order below should help you get titles are divided into chapters. A DVD which contains a through the important stages of getting set up so you movie may have only one title with many or no chapter
Summary of the content on the page No. 7
Table of Contents Before Using ........................................ 8 Advanced Functions ......................... 41 Getting Surround Sound from Checking Accessories ..................................... 8 Stereo Speakers.......................................41 Preparing the Remote Control .........................8 Adjusting the Dynamic Range of the Audio Soundtrack ..................................... 42 Names and Functions ......................... 9 Adjusting the Video Quality (Digita
Summary of the content on the page No. 8
Summary of the content on the page No. 9
BEFORE USING / NAMES AND FUNCTIONS Names and Functions Front Panel 1 2 345 678 9 0 - = ~ ! DVD PLA YERóNÀ><>ó
DNR FL OFF 0 VIRTUAL DOLBY ë
STANDBY DIGITAL SUB 5.1CH POWER STANDBY / ON CENTER SURROUND WOOFER MODE 4 1 Á
¢
DOLBY DIGITAL DTS DECODER 7 8 3 ACOUSTIC DAMPER MECHANISM OFF @ON AUDIO VIRTUAL DOLBY PICTURE FL DIGITAL CONTROL DIMMER _) (* & ^ % $ # @ 1 STANDBY/ON button (U.S. and Canadian 6 DNR indicator models only) Indicates that the digital noise reduction function is Press to
Summary of the content on the page No. 10
=7 (stop) button Press to stop playback. Pressing once enables playback to resume from a point shortly before the location where it stopped. Pressing twice causes the disc to return to the beginning of the disc if playback starts again (page 28). ~8 (pause) button Press during playback to pause. Press again to resume playback (page 45). !3 (play) button Press to start or resume playback (pages 25 and 28). @Á ¢ (forward) button Press to advance to chapters/tracks. Press and hold to perform fast-f
Summary of the content on the page No. 11
NAMES AND FUNCTIONS Display Window 128 3 4 5 6790 -= REPEAT COND. MEMORY DOLBY GUI 96 kHz ANGLE LAST MEMORY DIGITAL TRK DOWN MIX TOTAL REMAIN TITLE CHP LC R LFE LS SRS # @ ! ~ 1 96 kHz indicator 0 DTS indicator Indicates that the currently loaded disc contains an Indicates DTS audio playback. audio signal with a sampling frequency of 96 kHz. - DOLBY DIGITAL indicator 2 ANGLE indicator Indicates Dolby Digital audio playback. Indicates Multi-Angle playback is in progress (page 48). = REMAIN indica
Summary of the content on the page No. 12
Rear Panel 1 2 3 4 5 67 8 9 0 COMPONENT VIDEO OUT Y S-VIDEO OUT AC IN AUDIO OUT (2 ch) AUDIO OUT (5.1 ch) VIDEO OUT CENTER DIGITAL OUT VIDEO L OPT. 1 1 PB OUT L SELECT CONTROL TV SYSTEM OUT IN PAL AUTO R NTSC 2 2 P R R SUB 1 2 FRONT SURROUND WOOFER (The TV SYSTEM switch is not present on U.S. and Canadian models) 1 CONTROL jacks 6 COMPONENT VIDEO OUT jacks Use to connect this player to another component If your projection monitor, projector or similar bearing the Pioneer ë mark. This lets you c
Summary of the content on the page No. 13
NAMES AND FUNCTIONS L A I D I (Buttons indicated with * are used for menu operation.) Remote Control 1 MENU button* Use to display or close the DVD menu screen (page 26). 2 (standby/on) button 1 % Press to switch the player on or to put in standby 2 (pages 25 and 28). ^ OPEN/ CLOSE 3 3 AUDIO button DISPLAY AUDIO SUBTITLE ANGLE 4 & Press repeatedly to select one of the audio SETUP TOP MENU languages and/or audio formats programmed on a MENU 5 * DVD (page 37). For Video CD and CD, each press chan
Summary of the content on the page No. 14
~ RETURN button* ) DIMMER (FL) button Use to go one menu back (current settings are Press to change the brightness of the FL display and maintained). Use RETURN when you do not disc illumination in four steps: maximum brightness, want to change the option setting in a menu (pages medium brightness, minimum brightness, and off. 26, 30, and 55). When the FL display is turned off, the FL OFF indicator on the front panel lights. ! STEP/SLOW e/E buttons _ JOG MODE indicator Press STEP/SLOW E during
Summary of the content on the page No. 15
NAMES AND FUNCTIONS / MAKING CONNECTIONS Connection Guide Making The illustration on this page shows the basic setup using the audio and video cords included with this player. Use this illustration as a guide to setting up your home Connections system. An explanation of each type of audio and video connection available can be found on pages 17 to 19. To determine the best audio and video connection setup for your system, refer to the manuals supplied with the components you are making connection
Summary of the content on the page No. 16
Summary of the content on the page No. 17
MAKING CONNECTIONS DIGITAL OUT (Coaxial) Audio Connections The digital signal is transmitted electronically through a This player features two digital (optical and coaxial) and coaxial cable. also analog 2 channel and 5.1 channel audio output • Use to connect to an AV amplifier or receiver with connection possibilities. built-in Dolby Digital, DTS, or MPEG decoder. • Use a coaxial cable (not supplied) to connect the coaxial digital output on the player to the coaxial digital input on an AV ampl
Summary of the content on the page No. 18
Analog Audio Connection: 5.1 CHANNEL AUDIO OUT 5.1 channel audio refers to the current industry surround After making physical connections to either the AUDIO sound standard requiring two front speakers, a center OUT (2 Ch) or AUDIO OUT (5.1 Ch) analog jacks, be sure speaker, two surround (rear) speakers and a sub woofer. to identify which output you are going to be using in the Although in actuality there are 6 channels, because the [Analog Jacks] screen of the Setup Navigator (page 23). sub wo
Summary of the content on the page No. 19
Summary of the content on the page No. 20
TV SYSTEM switch System Control Connections (The TV SYSTEM switch is not present on U.S. and Using a commercially available cord with a mini plug Canadian models.) (3.5 mm dia. with no resistance) to connect this player’s Video output changes as follows according to the CONTROL IN jack to the CONTROL OUT jack of another playback disc‘s recorded format. PIONEER component bearing the ë mark, you can NTSC = PAL, PAL = NTSC conversion is possible on control the player as though it were a component i