Summary of the content on the page No. 1
DVD PLAYER
DV-333
Operating Instructions
Summary of the content on the page No. 2
CONGRATULATIONS ON YOUR PURCHASE OF CAUTION THIS FINE PIONEER PRODUCT. • Use of controls or adjustments or performance of Pioneer is on the leading edge of DVD research for procedures other than those specified herein may consumer products and this unit incorporates the latest result in hazardous radiation exposure. technological developments. • The use of optical instruments with this product We are sure you will be fully satisfied with the DVD will increase eye hazard. player. Thank you for yo
Summary of the content on the page No. 3
Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. • This player is not suitable for commercial use. IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within CAUTION: The exclamation point within an equilateral triangle an equilateral triangle, is intended to alert the user TO PREVENT THE RISK OF ELE
Summary of the content on the page No. 4
S S E E I I R R T T • • S S A A U U S S D D S S N N O O I I C C Features of This Player EIA EST 1924 We Compatible with DVD, Video CD Want You LISTENING For A Lifetime and CD formats DVD, Video CD and CD discs that display the logos Selecting fine audio equipment such as the unit you’ve just shown below can be played back on PIONEER DVD purchased is only the start of your musical enjoyment. Now players. For more information on discs compatible with it’s time to consider how you can maximize the
Summary of the content on the page No. 5
HOLA Compatible with a wide range of Wide range of DVD viewing options DVD digital audio output formats Multi-Angle (page 30) You can view scenes from different camera angles when watching movies or other media with multiple angle 1 playback available. DVDs are recorded in one of four types of digital audio ANGLE : 3/4 ANGLE : 2/4 formats (as of October 1998). The digital audio output jacks of this player output Dolby Digital*, DTS**, MPEG, and linear PCM digital bitstreams. This pla
Summary of the content on the page No. 6
Differences in Disc How to Proceed in This Composition Manual DVD is an incredible format that presents the highest DVD quality digital audio and video available today. The amount of information that can be recorded onto a DVD DVDs are divided into units referred to as titles, and disc is remarkable, allowing it to offer numerous titles are divided into chapters. A DVD which contains a functions and features available with no other format. movie may have only one title with many or no chapter Be
Summary of the content on the page No. 7
Table of contents Before Using ........................................ 8 Setting the Language Options......... 31 Checking Accessories .....................................8 Setting the on-screen display Preparing the Remote Control .........................8 (OSD) language ........................................31 Setting Language and Subtitle Preferences in Names and Functions ......................... 9 the Setup Screen Menus .........................31 Changing the Audio Language Front Pan
Summary of the content on the page No. 8
R E T OPEN/ LAST CONDITION CLOSE MEMORY MEMORY SUB TITLE ANGLE REPEAT AUDIO REPEAT SETUP MENU TOP MENU A-B DISPLAY RETURN ¦
55 ¦
2 3 NEXT PREV 4 ¢
¦
°
¦
STOP 7 PLAY 3 PAUSE 8 ¦
eSTEP/SLOWE1REV FWD Á
1 2 3 CLEAR 4 5 6 +10 ¦
7 8 9 0 RANDOM PROGRAM SEARCH MODE ë
N E Preparing the Remote Control Before Using Inserting batteries into the remote control 1 While pushing the tab on the battery compartment cover toward the center of the remote, pull out Checking Accessories in the directio
Summary of the content on the page No. 9
BEFORE USING/NAMES AND FUNCTIONS Names and Functions Front Panel 1 2 3 4 5 6 DVD PLAYER STANDBY/ON 0 4 1 Á ¢
7 8 3 ëA
0 9 87 1 STANDBY/ON switch 63 (play) button Press to switch the player on or to put in standby Press to start or resume playback (pages 20, 23). (pages 20, 23). 7Á ¢ (forward) button 2 Disc tray Press to advance to chapters/tracks. Press and hold When loading a disc, place discs in the disc tray with to perform fast-forward scanning (page 22). the label side facing up (pages 2
Summary of the content on the page No. 10
Display Window 1 235 4 6 78 9 0 - = ~ DOLBY DVD GUI DIGITAL CONDITION VCD LAST TOTAL MEMO REMAIN TRK CHP TITLE @ ! 1 VCD indicator 9 CONDITION indicator VCD lights when a Video CD is loaded. CD lights Indicates that Condition Memory settings are when an audio CD is loaded. memorized for the currently loaded DVD (page 46). 2 DVD indicator 0 TOTAL indicator Lights when a DVD is loaded. Indicates that the disc in the player is stopped and DISPLAY has been pressed (page 48). 3 indicator - indicator
Summary of the content on the page No. 11
NAMES AND FUNCTIONS Rear Panel 1 2 34 5 6 AC IN COMPONENT VIDEO OUT DIGITAL OUT Y PB PR DIGITAL OUT OPT VIDEO CONTROL OUT SELECT IN L R S-VIDEO VIDEO AUDIO OUT OUT OUT 9 8 7 1 COMPONENT VIDEO OUT jacks 6 AC IN power cord connection terminal If your TV or monitor has component video inputs, Use to connect the power cord to the wall outlet you can produce a higher quality picture on your TV (page 14). or monitor by connecting to the component video outputs on this unit. When using these jacks, b
Summary of the content on the page No. 12
5 5 R E T (Buttons indicated with * are used for menu operation.) Remote Control 1 LAST MEMORY button You can resume DVD or Video CD playback from the point you last watched even if the disc is removed from the player. Press LAST MEMORY during playback to set a Last Memory point. When you 1 # OPEN/ want to resume playback of that disc, press LAST CONDITION CLOSE LAST MEMORY MEMORY MEMORY in the stop mode and playback starts $ 2 from the memorized point. Last Memory locations % ANGLE REPEAT AUDIO
Summary of the content on the page No. 13
NAMES AND FUNCTIONS =e STEP/SLOW E buttons _ PLAY 3 button Press STEP/SLOW E during playback to view Press to start disc playback (pages 20, 23). slow playback. In pause mode, press STEP/SLOW E to advance DVDs and Video CDs frame by frame + PAUSE 8 button and STEP/SLOW e to back up a few frames at a Press to pause playback of a disc. Press again to time (page 38). resume playback (page 38). ~ Number buttons (1-9, 0, +10)* Á1 REV FWD Á (fast reverse/forward) Use to perform direct title and chap
Summary of the content on the page No. 14
Connection Guide Making The illustration on this page shows the basic setup using the audio and video cords included with this player. Use this illustration as a guide to setting up your home system. Connections An explanation of each type of audio and video connection available can be found on pages 15 to 16. To determine the best audio and video connection setup for your system, refer to the manuals supplied with the components you are making connections to. Connecting Your DVD Player In addit
Summary of the content on the page No. 15
MAKING CONNECTIONS DIGITAL OUT (Coaxial) Audio Connections The digital signal is transmitted electronically through a coaxial cable. This player features two digital (optical and coaxial) and also analog audio output formats. • Use to connect to an AV amplifier or receiver with built-in Dolby Digital, DTS, or MPEG decoder. • Use a coaxial cable (not supplied) to connect the Digital Audio Connections: DIGITAL OUT (coaxial digital output) on the player to You can enjoy the digital audio recorded
Summary of the content on the page No. 16
COMPONENT VIDEO OUT Video Connections • Make component video connections to a TV or monitor with component inputs to produce a higher This player features S-video, composite, and component quality video image. video output possibilities. • Use a component video cable or 3 video cords (not Check the manual supplied with your TV or monitor to supplied) to connect the COMPONENT VIDEO OUT determine the best possible connection for your system. jacks on the player to the component jacks on the In add
Summary of the content on the page No. 17
MAKING CONNECTIONS / SETTING UP THE PLAYER 5 5 R E T 1 Press STANDBY/ON on the front panel Setting Up the ( on the remote control). Player 2 Press SETUP. When SETUP is pressed for the first time, the following screen appears. Though the Setup Navigator may be used more than once, this screen only appears the first time SETUP is pressed. Using the Setup Navigator The Setup Navigator has been designed to simplify the Audio1 Audio2 Video Language General process of getting the DVD player ready to
Summary of the content on the page No. 18
Setting the OSD Language Setting the TV screen size (On-Screen Display Language) The [TV Type] screen establishes the size, or more appropriately the width to height ration of your television The [OSD Language] screen establishes the OSD or monitor. The width-to-height ratio of conventional TVs language, or on-screen display language, which refers to is 4:3, while the width-to-height ratio of wide screen and the language that is used by the player in menus and high-definition TVs is 16:9. This w
Summary of the content on the page No. 19
SETTING UP THE PLAYER Setting digital audio connections Confirming the settings to an AV amplifier or decoder The [Exit Setup Navigator] is the final screen in the Setup Navigator. The [Digital Jack] screen establishes whether digital connections have been made to an AV amplifier, receiver, or external decoder. As there are numerous Audio1 Audio2 Video Language General options available, please refer to the instructions Setup Navigator supplied with the component the player is connected to Save
Summary of the content on the page No. 20
5 5 R E T Getting Started 1 Press ( STANDBY/ON on the front panel). Using Your DVD 2 Press OPEN/CLOSE (0 on the front panel). The disc tray comes out. Player 3 Load a disc. • Load a disc with the label side facing up, using the disc tray guide to align the disc. Playing DVDs, Video CDs and CDs – DVD/Video CD/CD Before you can start to enjoy the digital audio and video on DVDs, be sure that you have either performed the Setup Navigator procedure described in the previous section or made the nece
