Summary of the content on the page No. 1
MCD177
DVD Micro Theater
Register your product and get support at
www.philips.com/welcome
User manual
Manuel d'utilisation
Manual de usuario
Benutzerhandbuch
Gebruikershandleiding
Manuale dell'utente
Användarhandbok
Brugervejledning
pg001-020_MCD177_12_Eng 1 2/5/09, 10:28
Summary of the content on the page No. 2
Important notes for users in the Italia U.K. DICHIARAZIONE DI CONFORMITA’ Mains plug Si dichiara che l’apparecchio MCD177 Philips This apparatus is fitted with an approved 13 risponde alle prescrizioni dell’art. 2 comma 1 del Amp plug. To change a fuse in this type of plug D.M. 28 Agosto 1995 n. 548. proceed as follows: 1 Remove fuse cover and fuse. Fatto a Eindhoven 2 Fix new fuse which should be a BS1362 3 Amp, Philips Consumer Electronics A.S.T.A. or BSI approved type. Philips, Glaslaan 2
Summary of the content on the page No. 3
DK SF Advarsel: Usynlig laserstråling ved åbning Luokan 1 laserlaite når sikkerhedsafbrydere er ude af funktion. Varoitus! Laitteen käyttäminen muulla kuin Undgå utsættelse for stråling. tässä käyttöohjeessa mainitulla tavalla Bemærk: Netafbryderen er sekundært saattaa altistaa käyttäjän indkoblet og ofbryder ikke strømmen fra turvallisuusluokan 1 ylittävälle nettet. Den indbyggede netdel er derfor näkymättömälle lasersäteilylle. tilsluttet til lysnettet så længe netstikket Oikeus muutoksiin va
Summary of the content on the page No. 4
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Manufactured under license from Dolby Corporation and other rights owners. Use of this Laboratories. Dolby and the double-D symbol copyright protection technology must be are trademarks of Dolby Laboratories. authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwi
Summary of the content on the page No. 5
Index English ------------------------------------------------ 6 Français -------------------------------------------- 40 Español --------------------------------------------- 75 Deutsch ------------------------------------------- 110 Nederlands -------------------------------------- 148 Italiano -------------------------------------------- 183 Svenska ------------------------------------------- 218 Dansk --------------------------------------------- 252 5 pg001-020_MCD177_12_Eng 5 2/5/09, 10:28
Summary of the content on the page No. 6
English Contents General Information Disc Operations Features .................................................................. 8 Playable Discs ...................................................... 21 Supplied accessories ............................................ 8 Region Codes ...................................................... 21 Environmental information ................................ 8 Playing discs ......................................................... 22 Safety information ..
Summary of the content on the page No. 7
Contents Radio Reception Tuning to radio stations .................................... 32 Programming radio station .............................. 32 Automatic programming Manual programming Tuning to preset radio stations ....................... 32 USB Connection Using USB connectivity .............................. 33~34 Clock/Timer Viewing clock ...................................................... 35 Setting clock ........................................................ 35 Setting wake-up t
Summary of the content on the page No. 8
English General Information Your system consists of materials which can be Congratulations on your purchase and recycled and reused if disassembled by a welcome to Philips! specialised company. Please observe the local To fully benefit from the support that Philips regulations regarding the disposal of packaging offers, register your product at materials, exhausted batteries and old equipment. www.philips.com/welcome. Disposal of your old product This product complies with the radio Your produc
Summary of the content on the page No. 9
General Information ● Place the system in a location with adequate Leave the player in the warm environment until ventilation to prevent internal heat build-up in the moisture evaporates. your system. Allow at least 10 cm (4 inches) clearance from the rear and the top of the unit and 5 cm (2 inches) from each side. Hearing Safety ● The ventilation should not be impeded by Listen at a moderate volume. covering the ventilation openings with items, ● Using headphones at a high volume can impair su
Summary of the content on the page No. 10
English Connections Step 1: Placing speakers Step 2: Connecting speakers ● Connect the speaker wires to the SPEAKER terminals, right speaker to "R" and left speaker to "L", coloured (marked) wire to "+" and black (unmarked) wire to "-". Fully insert the stripped portion of the speaker wire into the terminal as shown. ● Place the left and right speakers at equal distances from the TV set and at an angle of Notes: approximately 45 degrees from the listening –For optimal sound performance, us
Summary of the content on the page No. 11
Connections Step 3: Connecting TV set Using Headphone jack IMPORTANT! –You only need to make one video connection from the following options, according to the capabilities of your TV system. – S-Video connection provides higher picture quality. This option must be available on your TV set. – Connect the system directly to the TV set. Using Video In jack (CVBS) ● To listen to TV through this system, use a cinch cable (not supplied) to connect AUX IN jack (3.5mm) to the HEADPHONE jack
Summary of the content on the page No. 12
English Connections Using Scart jack Using an accessory RF modulator ● Use the scart cable (not supplied) to connect IMPORTANT! the system’s SCART jacks to the corresponding – If your TV set only has a single SCART input jacks on the TV set. Antenna In jack (or labeled as 75 ohm or RF In), you will need a RF modulator in TO TV order to view the DVD playback via TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations. TO TV Using S-Video In jac
Summary of the content on the page No. 13
Connections Step 4: Connecting the FM Step 6: Connecting a VCR or antenna cable/satellite box ● Connect the supplied FM antenna to the FM (75 Using the VCR for recording DVDs Ω) jack at the back of the main unit. Extend the FM antenna and fix its end to the wall. Step 5: Connecting the power cord IMPORTANT! – Never make or change any connection with the power switched on. Some DVDs are copyright-protected. You cannot record or dub protected discs using VCR. 1 Connect the system’s COMPOSITE VIDEO
Summary of the content on the page No. 14
English Connections Step 7: Connecting digital Step 8: Connecting portable audio equipment audio player Digital audio recorder Recording (digital) Portable audio player(MP3) Connect the system’s COAXIAL OUT (digital Connect the system’s AUX jack (diameter out) jack to the DIGITAL IN jack on a digital 3.5mm) to the HEADPHONE jack (diameter recording device (DTS-Digital Theater System 3.5mm) on a portable audio player. compatible, with a Dolby Digital decoder, for example). Before starting playbac
Summary of the content on the page No. 15
Functional Overview ! 0 D 7 1 2 3 45 6789 6 MODE Controls on the system – selects various repeat modes or the shuffle play 1 STANDBY ON (2) mode for a disc (For VCD with PBC feature, – switches the system on or to Eco-power standby PBC must be turned off). /standby mode. 7 VOLUME 2 SOURCE – adjusts the volume upward/downward. –selects the respective sound source: DISC/USB/ 8 DISPLAY/CLOCK FM/AUX. Disc ....................... displays the current status and/or – switches on the system. disc info
Summary of the content on the page No. 16
English Functional Overview 6 OK – confirms a selection. 4 / 3 / 5 / 6 – selects an item in a menu. 1 –moves an enlarged picture up/down/left/right. 2 5 / 6 # 3 Disc ....................... fast searches backward/forward $ in a disc at different speeds. 4 % 5 Tuner .................... tunes to radio stations. clock/timer.... ..... adjusts the hours for the clock/ timer function. 6 7 DSC (Digital Sound Control) – selects different types of preset sound equalizer settings. 7 ^ 8 8ÉÅ – sta
Summary of the content on the page No. 17
Functional Overview ^ LOUD/DBB – enables or disables automatic loudness adjustment. – enables or disables bass enhancement. & VOL +/- – adjusts the volume upward/downward. * MUTE – disables or enables sound output. ( AUDIO for VCD – sets stereo, mono left, mono right or mix mono sound mode. for DVD – selects an audio language. ) ZOOM –zoom in or out the picture. ¡ SUBTITLE – selects a subtitle language. ™ GOTO – In DISC mode, to fast search in a disc by entering a time, title, chapter or track.
Summary of the content on the page No. 18
English Getting Started Step 1: Using Remote Control Step 2: Setting up the TV IMPORTANT! IMPORTANT! – Before using the remote control, Make sure you have completed all the remove the insulation plastic tab as necessary connections. (See shown in the picture below. “Connecting TV”). – If the remote control does not 1 Switch the DVD system on and then select function correctly or the operating range DISC source. (See “Switching the system on/ is reduced, replace the battery with a off”). new (CR2
Summary of the content on the page No. 19
Getting Started 1 In disc mode, press SYSTEM MENU. Step 3: Setting language 2 Press à / á / 4 / 3 keys on the remote preference control to navigate in the menu. You can select your own preferred language ➜ Move to “Video Setup Page”and press 4. settings. This DVD system will automatically ➜ Move to “TV TYPE” and press á. switch to the selected language whenever you PAL load a disc. If the language selected is not – Select this if the connected TV set is PAL available on the disc, the disc’s defa
Summary of the content on the page No. 20
English Basic Operations IMPORTANT! Volume control – Before you operate the system, Press VOLUME (or VOL +/- on the remote) complete the connection procedures. to increase or decrease the volume level. – When the system is switched to ➜ The display briefly shows ”VOL” and a volume Standby mode, it is still consuming value from “01” to “31” ( “MIN” or “MAX” is power.To disconnect the system from the displayed when adjusted to the lowest or highest power supply completely, reomve the AC volume le
