Summary of the content on the page No. 1
MCD139B
DVD Micro Theater
Register your product and get support at
www.philips.com/welcome
User manual
Manual de usuario
Manual do Utilizador
pg001-038_MCD139B_55_Eng 1 2007.11.12, 10:24
Summary of the content on the page No. 2
México Es necesario que lea cuidadosamente su instructivo de manejo. PRECAUCIÓN - ADVERTENCIA No abrir, riesgo de choque eléctrico ATENCIÓN Verifique que el voltaje de alimentación sea el requerido para su aparato Para evitar el riesgo de choque eléctrico, no quite la tapa. En caso de requerir servicio, dirijase al personal calificado. Descripción: Minisistema de Audio Modelo : MCD139B/ 55 Alimentación: 110–127 / 220–240V~; 50–60 Hz Consumo: 100 W Importador: Philips Mexicana, S.A. de C.V. Domic
Summary of the content on the page No. 3
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVSION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY Manufactured under license from Dolby CAUSE ARTIFACTS TO BE DISPLAYED IN THE Laboratories. Dolby and the double-D symbol PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE are trademarks of Dolby Laboratories. SCAN PICTURE PROBLEMS, IT IS RECOM- MENDED THAT THE USER SWITCH THE CONNECTIN TO THE ‘STANDARD DEFINITION’ Windows Media and the Windows logo are OUTPUT. IF THERE ARE QUESTIONS REGARD-
Summary of the content on the page No. 4
CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. ATENCIÓN El uso de mando o ajustes o la ejecucción de métodos que no sean los aquí descritos puede ocasionar peligro de exposición a radiación. CUIDADO A utilização de comandos ou ajustes ou a execução de procedimentos diferentes dos descritos neste manual podem provocar uma exposição a radiações perigosas ou outras operações inseguras. 4 pg0
Summary of the content on the page No. 5
Index English ------------------------------------------------ 6 Español --------------------------------------------- 39 Português ------------------------------------------ 79 5 pg001-038_MCD139B_55_Eng 5 2007.11.12, 10:24 Português Español English
Summary of the content on the page No. 6
English Contents General Information Disc Operations Features .................................................................. 8 Playable Discs ...................................................... 22 Supplied accessories ............................................ 8 Region Codes ...................................................... 22 Environmental information ................................ 8 Playing discs ......................................................... 23 Safety information ..
Summary of the content on the page No. 7
Contents Tuner Tuning to radio stations .................................... 32 Storing preset radio stations ........................... 32 Manual programming ...............................................32 Autostore: automatic programming .....................32 Listening to preset radio stations ................... 32 Deleting a preset radio station ....................... 32 Clock/Timer Viewing clock ...................................................... 33 Setting clock ..................
Summary of the content on the page No. 8
English General Information Congratulations on your purchase and welcome Supplied accessories to Philips! – Remote control with one CR2025 battery –Two speakers and one subwoofer To fully benefit from the support that Philips – DIN cable offers, register your product at www.philips.com/ – Composite video cable (yellow) welcome. – FM wire antenna – User Manual and Quick Start Guide This product complies with the radio interference requirements of the European If any item is damaged or missing, co
Summary of the content on the page No. 9
General Information Safety information Maintenance ● Before operating the system, check that the ● When a disc becomes dirty, operating voltage indicated on the typeplate (or clean it with a cleaning cloth. the voltage indication beside the voltage Wipe the disc from the center selector) of your system is identical with the out, in a straight line. voltage of your local power supply. If not, please ● Do not expose the player, consult your dealer. batteries or discs to humidity, ● Where the MAINS
Summary of the content on the page No. 10
English Connections Step 1: Placing speakers and Step 2: Connecting speakers subwoofer and subwoofer 6 8 AC MAINS ~ ● Connect the supplied DIN cable to DVD player’s For best possible surround sound, locate your DIN jack and the left speaker’s DIN jack. speakers and subwoofer as follows: ● Connect the supplied speaker wires of the right ● Place the left and right speakers at equal speaker to SPEAKER RIGHT on the left speaker, distances from the TV set and at an angle of red wire to red jack ( “+”
Summary of the content on the page No. 11
Connections ● To listen to TV channels through this system, use Step 3: Connecting TV set the audio cables (white/red, not supplied) to connect AUX IN1 (L/R) jacks to the IMPORTANT! HEADPHONE jacks on the TV set (with a –You only need to make one video 3.5mm-diameter stereo jack). connection from the following options, according to the capabilities of your TV Before starting operation, press AUX1/2/TV on system. the remote control to select “AUX 1” in order – S-Video or Component Video to activa
Summary of the content on the page No. 12
English Connections Using S-Video In jack Using an accessory RF modulator IMPORTANT! – If your TV set only has a single Antenna In jack (or labeled as 75 ohm or RF In), you will need a RF modulator in order to view the DVD playback via TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations. ● Use the S-Video cable (not supplied) to connect the system’s S-VIDEO jack to the S-Video input jack (or labeled as Y/C or S-VHS) on the TV set. ● To lis
Summary of the content on the page No. 13
Connections Step 4: Connecting the FM Step 6: Connecting a VCR or antenna cable/satellite box ● Connect the supplied FM antenna to the FM (75 Viewing and listening to playback Ω) jack at the back of the main unit. Extend the FM antenna and fix its end to the wall. Step 5: Connecting the power cord IMPORTANT! – Never make or change any connection with the power switched on. 8 6 1 Connect the VCR or Cable/Satellite Box to the TV system as shown. 2 Use the audio cables (red/white, not supplied) to
Summary of the content on the page No. 14
English Connections Step 7: Connecting digital Step 8: Connecting portable audio equipment audio player Digital audio recorder Portable audio player(MP3) Recording (digital) Connect the system’s AUX IN 2 jack to the Connect the system’s COAXIAL OUT (digital HEADPHONE jack (diameter 3.5mm) on a out) jack to the DIGITAL IN jack on a digital recording device (DTS-Digital Theater System portable audio player. compatible, with a Dolby Digital decoder, for Before starting playback, press AUX1/2 on the
Summary of the content on the page No. 15
Functional Overview 1 7 8 2 9 3 0 ! 4 5 6 6 iR Sensor Controls on the system – point the remote control towards this sensor. 1 DBB 7 OPEN/CLOSE – enables or disables bass enhancement. – opens or closes the disc door. 2 DSC 8 PROGRAM – selects different types of preset sound equalizer Tuner .................... program the favourite stations. settings. Tuner..................... press and hold to start automatic preset programming. 3 TUNING à / á Disc ....................... program the favourite
Summary of the content on the page No. 16
English Functional Overview 6 OK – confirms a selection. 4 / 3 / 5 / 6 – selects an item in a menu. –moves an enlarged picture up/down/left/right. TV 5 / 6 Disc ....................... fast searches backward/forward in a disc at different speeds. Tuner .................... tunes to a radio station Clock .................... sets the minutes 7 AUDIO for VCD – sets stereo, mono left, mono right or mix mono sound mode. for DVD + – selects an audio language. 8ÉÅ – starts or interrupts disc playb
Summary of the content on the page No. 17
Functional Overview & MUTE – disables or enables sound output. * VOL +/- – adjusts the volume upward/downward. ( TITLE/RETURN –for DVD, go back to the previous menu. –for VCD, in play mode, go back to the PBC menu page. ) ZOOM –zoom in or out the picture. ¡ DSC – selects different types of preset sound equalizer settings. ™ DBB – enables or disables bass enhancement. £ SUBTITLE – selects a subtitle language. Notes for remote control: – First select the source you wish to control by pressing one
Summary of the content on the page No. 18
English Getting Started Step 1: Using Remote Control Step 2: Setting up the TV IMPORTANT! IMPORTANT! – Before using the remote control, Make sure you have completed all the remove the insulation plastic tab as necessary connections. (See shown in the picture below. “Connecting TV”). – If the remote control does not 1 Switch the DVD system on and then select function correctly or the operating range DISC source. (See “Switching the system on/ is reduced, replace the battery with a off”). new (CR2
Summary of the content on the page No. 19
Getting Started 1 In disc mode, press SYSTEM MENU. Setting up Progressive Scan feature (for 2 Press à / á / 4 / 3 keys on the remote Progressive Scan TV only) control to navigate in the menu. ➜ Move to “Video Setup Page”and press 4. The progressive scan display twice the number ➜ Move to “TV TYPE” and press á. of frames per seconds than interlaced scanning (ordinary normal TV system). With nearly PAL double the number of lines, progressive scan – Select this if the connected TV set is PAL offers
Summary of the content on the page No. 20
English Getting Started 9 In the confirmation menu, press à / á to Setting the OSD Language highlight OK in the menu and press OK on the 1 In disc mode, stop playback and press remote to confirm. SYSTEM MENU ➜ Progressive scan is now set on. TV screen comes to the system menu. 2 Press à / á / 4 / 3 keys on the remote ➜ If distorted picture still appears, it indicates control to navigate in the menu. that your TV doesn’t support progressive scan. In ➜ Move to “General Setup Page” and press 4. th
