Philips MCD107/93 user manual

Summary of the content on the page No. 1

MCD107
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Remote Control Audio/video cable MP3 link cable
Quick Start Guide
User Manual
MCD107_93_QSG_EN.indd 1 8/26/2009 3:18:37 PM

Summary of the content on the page No. 2

1 Connect the speaker cables. Tip See the User Manual for how to connect other equipment to this apparatus. 2 Connect the AC power cord to the wall socket. FM antenna Speaker Speaker (right) (left) AC power Set clock 1 In standy-by mode, press and hold CLOCK/DISPLAY to activate the clock setting mode. » The 12 hour or 24 hour format is displayed. 2 Press PROG repeatedly to select 12 hour or 24 hour format. 3 Press CLOCK/DISPLAY to confirm. » The hour digits are displayed and begin to blink.

Summary of the content on the page No. 3

Play discs 1 Press DISC to select the disc source. 2 / Press to open the disc compartment. 3 Insert a disc with the printed side facing up, then close the disc door. » Play starts automatically. • To stop play, press 9. Play from USB devices With the apparatus, you can use USB flash memory (USB 2.0 or USB1.1), , USB flash players (USB 2.0 or USB1.1) memory cards (requires an additional card reader to work with this apparatus). 1 Insert the USB plug of a USB device into the socket. 2

Summary of the content on the page No. 4

Programming and tuning to radio stations 1 Press TUNER to select FM. 2 Press and hold PROG/ANGLE for more than 2 seconds. » All available stations are programmed in the order of waveband reception strength. » The first programmed radio station is broadcast automatically. 3 Press ¡ or ™ until the desired preset station is displayed. Tip Detailed playback features and additional functions are described in the accompanied owner's manual. Royal Philips Electronics N.V. 2009 C All rights reserved.