Summary of the content on the page No. 1
DVD Video Player DDVP762/00 VD762/78
User manual
Visit us at www.p4c.philips.com for service support
Summary of the content on the page No. 2
General Information Environmental Information Laser safety All unnecessary packaging has been This unit employs a laser. Due to possible omitted. The packaging has been made eye injury, only a qualified service person easy to separate into three materials: should remove the cover or attempt to cardboard (box), polystyrene foam service this device. (buffer) and polyethylene (bags, protective foam sheet). NOTE: PICTURES SHOWN MAYBE Your DVD player consists of materials DIFFERENT BETWEEN which can
Summary of the content on the page No. 3
Index English --------------------------------------- 6 Español ------------------------------------ 38 Português --------------------------------- 72 ‘CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE The apparatus shall no
Summary of the content on the page No. 4
English Contents Introduction Disc Operations Supplied accessories ....................................... 6 Playable Discs ................................................. 16 Care and safety information .......................... 6 Region Codes ................................................. 16 Playing discs ............................................... 16-17 Auto Eco Power standby mode ................ 17 Connections Basic playback controls................................. 17 Connecting T
Summary of the content on the page No. 5
Contents DVD Menu Options General Setup menu ............................... 26-27 Locking/Unlocking the disc for viewing ... 26 Dimming system’s display screen .............. 26 Programming disc tracks .......................26-27 OSD Language ............................................... 27 Screen Saver - turning on/off ..................... 27 DivX(R) VOD registration code ............... 27 Audio Setup Menu ................................... 28-29 Digital Audio Setup .....................
Summary of the content on the page No. 6
English General Information Do not block the vents Supplied accessories – Do not operate the DVD Player in an enclosed cabinet, allow about 2.5 cm (1 inches) of free space all around the player for adequate ventilation. 2.5 cm (1 inches) Remote Control 2.5 cm PHILIPS 2.5 cm (1 inches) (1 inches) and two AA batteries PREVIEW PREVIEW M MUTE UTE Care of the cabinet DIM DIM SLEEP SLEEP MODE MODE SAVE SAVE – Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solutio
Summary of the content on the page No. 7
Connections Connecting TV COMPONENT VIDEO IN COMPONENT S-VIDEO VIDEO IN IN V (Pr/Cr) AUDIO S-VIDEO OUT IN V (Pr/Cr) AUDIO OUT U (Pb/Cb) VIDEO IN U (Pb/Cb) VIDEO IN COMPONENT Y S-VIDEO VIDEO IN IN V (Pr/Cr) AUDIO OUT U (Pb/Cb) VIDEO IN COMPONENT VIDEO IN Y Y S-VIDEO IN V (Pr/Cr) AUDIO OUT U (Pb/Cb) VIDEO IN Y 1 2 1 2 CVBS Y DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital DIGITAL AUDIO OUT CVBS Y PCM/MPEG2/Dolby Digital L L R COAXIAL OPTICAL R S-VIDEO Pr Pb STEREO COAXIAL OPTICAL S-VIDEO Pr Pb STEREO I
Summary of the content on the page No. 8
English Connections RF coaxial cable to TV 2 Back of RF Modulator COMPONENT VIDEO IN S-VIDEO (example only) IN V (Pr/Cr) AUDIO OUT INT IN TO TV VIDEO AUDIO IN IN R L U (Pb/Cb) VIDEO IN COMPONENT VIDEO IN Y S-VIDEO IN V (Pr/Cr) AUDIO OUT CH3 CH4 U (Pb/Cb) VIDEO IN Y 1 2 Antenna or Cable TV signal 1 DIGITAL AUDIO OUT CVBS Y PCM/MPEG2/Dolby Digital L DIGITAL AUDIO OUT CVBS Y PCM/MPEG2/Dolby Digital L R COAXIAL OPTICAL S-VIDEO Pr Pb STEREO R COAXIAL OPTICAL S-VIDEO Pr Pb STER IMPORTA
Summary of the content on the page No. 9
Connections Connecting the power cord COMPONENT VIDEO IN S-VIDEO IN V (Pr/Cr) AUDIO OUT ~ AC MAINS U (Pb/Cb) VIDEO IN Y DIGITAL AUDIO OUT CVBS Y PCM/MPEG2/Dolby Digital COAXIAL OPTICAL S-VIDEO Pr Pb After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on. If a disc is loaded, press STANDBY ON on the DVD Player front panel, ➜ “DISC” appears on the display panel. If a memory card is inserted, press
Summary of the content on the page No. 10
English Connections Optional: Connecting to an Optional: Connecting Digital AV Receiver Audio System STEREO OPTICAL AV Receiver AUDIO OPTICAL OUT AUDIO OUT DIGITAL DIGITAL OR CVBS CVBS Y DIGITAL AUDIO OUT Y DIGITAL AUDIO OUT PCM/MPEG2/Dolby Digital PCM/MPEG2/Dolby Digital L R COAXIAL OPTICAL COAXIAL OPTICAL S-VIDEO Pr Pb STEREO S-VIDEO Pr Pb Stereo system has Dolby Pro Logic Receiver has a PCM, Dolby Digital, or Right / Left Audio In jack or MPEG2 decoder 1 Select one of the video connections
Summary of the content on the page No. 11
Functional Overview Front and Rear Panels 9 STOP – To stop playback T NEXT STANDBY-ON B – To search or select next chapter or track – To switch the DVD Player to Standby 2; PLAY/PAUSE mode or ON – To start or interrupt playback Disc tray PREV S OPEN/CLOSE / – To search or select previous chapter or – Open/Close the disc tray track Display Digital Media Reader (Slot 2) – Shows the current status of the DVD – To slot in Compact Flash (Type 1) card Player Digital Media Reader (Slot 1) IR Sensor – T
Summary of the content on the page No. 12
English Functional Overview Remote Control RETURN / TITLE POWER B – To go back to previous menu / – To switch the DVD player to show title menu standby mode or ON DISC MENU 0-9 numerical key pad – Enters or exits the disc contents – Selects numbered items in a menu menu – Switches on or off the playback control mode (for VCD version DISPLAY 2.0 only) – Displays information on TV screen during playback 1 2 3 4 – Selects an item in the menu/ SYSTEM MENU fast forward/backward, slow forward/ – Acces
Summary of the content on the page No. 13
Getting Started Step 2: Setting up the TV Step 1: Inserting batteries into the Remote Control IMPORTANT! Make sure you have completed all 3 the necessary connections. (See 1 pages 7-8 “Connecting TV”). 2 1 Turn on the TV and set to the correct video-in channel. You should see the Philips DVD background screen on the TV. 1 Open the battery compartment. ➜ Usually these channels are between the 2 Insert two batteries type R06 or AA, lowest and highest channels and may be following the indications
Summary of the content on the page No. 14
English Getting Started 4 Press 34 to highlight one of the options To deactivate Progressive manually - below: cont’d PAL – Select this if the connected TV is If the progressive function is activated, but PAL system. It will change the video signal your TV does not support progressive of a NTSC disc and output in PAL format. function or YPbPr cable is not connected accordingly, there will be a blank screen. NTSC – Select this if the connected TV You can deactivated progressive function is NTSC s
Summary of the content on the page No. 15
Getting Started Step 3: Setting language Setting the Audio, Subtitle and Disc menu language preference You can choose your own preferred You can select your own preferred language or soundtrack from audio, language settings.This DVD Player will subtitles and disc menu languages. If the automatically switch to the language for language selected is not available on the you whenever you load a disc. disc, the disc’s default language will be Setting the OSD Language used instead. The On-screen lang
Summary of the content on the page No. 16
English Disc Operations IMPORTANT! Region Codes – If the inhibit icon (ø or X) appears DVD discs must be labeled for ALL ALL on the TV screen when a button is regions or Region 4 in order to pressed, it means the function is not play on this Player. You cannot play available on the current disc or at 4 Discs that are labeled for other the current time. regions. – Depending on the DVD or VIDEO CD, some operations may be Helpful Hints: different or restricted. – It may not be possible to play CD-R
Summary of the content on the page No. 17
Disc Operations Selecting various repeat/shuffle Auto Eco Power standby mode functions This is a power-saving feature, the system will automatically switch to Eco Power Repeat play mode standby mode if you do not press any button within 30 minutes after a disc has While playing a disc, press REPEAT stopped playing. continuously to choose a ‘Play Mode’. Pressing STANDBY-ON or POWER DVD key repeatedly will switch Eco Power ™ RPT ONE (repeat chapter) standby mode to on/off. ™ RPT TT (repeat title
Summary of the content on the page No. 18
English Disc Operations Operations for video playback Using the OSD menu (DVD/VCD/SVCD) OSD menu shows the disc playback information (for example, title or chapter Using the Disc Menu number, elapsed playing time, audio/ subtitle language), a number of operations Depending on the disc, a menu may can be done without interrupting disc appear on the TV screen once you load in playback. the disc. 1 During playback, press DISPLAY. To select a playback feature or item ➜ A list of available disc infor
Summary of the content on the page No. 19
Disc Operations Special DVD Features Special VCD & SVCD Features Playing a Title Playback Control (PBC) 1 Press DISC MENU. For VCD with Playback Control (PBC) ➜ The disc title menu appears on the TV feature (version 2.0 only) screen. Press DISC MENU to toggle between 2 Use 341 2 keys or numeric keypad ‘PBC ON’ and ‘PBC OFF’. (0-9) to select a play option. ➜ If you select ‘PBC ON’, the disc menu (if available) will appear on the TV. 3 Press OK key to confirm. ➜ Use the S / T or the numeric keyp
Summary of the content on the page No. 20
English Disc Operations Preview Function AB C D 1 Press PREVIEW. 2 Press 34 to highlight {TRACK DIGEST}, EF G H {DISC INTERVAL} or {TRACK INTERVAL}. IJ K L 3 Press OK to open one option. SELECT DIGEST TYPE: (example for 12 thumbnail pictures display) TRACK DIGEST 4 Use 1 2 3 4 keys to select a track or DISC INTERVAL use numeric keypad (0-9) to input the TRACK INTERVAL selected track number next to {SELECT}. 5 Press S / T to open the previous Track Digest or next page. This function will minimise
