Summary of the content on the page No. 1
Register your product and get support at
www.philips.com/welcome
DVP3360
EN User manual
Summary of the content on the page No. 2
2
Summary of the content on the page No. 3
6 Advanced features 25 Contents Create MP3 les 25 1 Important 4 7 Adjust settings 26 Safety and important notice 4 General setup 26 Trademark Notice 5 Audio setup 27 Video setup 29 Preferences 32 2 Your DVD player 6 8 Additional information 34 Features highlight 6 Product overview 7 Update software 34 Care 34 3 Connect 9 9 Speci cation 35 Connect video cables 9 Connect audio cables 11 Route audio to other devices 11 10 Troubleshooting 36 Connect USB device 12 Connect to power outlet 12 1
Summary of the content on the page No. 4
1 Important This product complies with the radio interference requirements of the European Community. This product complies with the requirements of the following directives and Safety and important notice guidelines: 2006/95/EC, 2004/108/EC. Warning This product is in compliance with the EEE • Risk of overheating! Never install the DVD player directive. in a con ned space. Always leave a space of at least four inches around the DVD player for ventilation. Ensure the curtains o
Summary of the content on the page No. 5
Trademark Notice Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of Manufactured under license from Dolby electrical and electronic products. The correct Laboratories. Dolby and the double-D symbol disposal of your old product helps prevent are trademarks of Dolby Laboratories. potentially negative consequences on the environment and human health. Windows Media and the Windows logo are Yo
Summary of the content on the page No. 6
Screen t 2 Your DVD View the movie in full screen on any TV with this DVD player. player Hi speed USB 2.0 link Congratulations on your purchase, and Simply plug your USB ash drive into the USB welcome to Philips! To fully bene t from the socket to play your MP3/WMA/JPEG/DivX les support that Philips offers, register your product to enjoy the music play in superb sound quality. at www.philips.com/welcome. This DVD player offers higher picture quality Create MP3 les video play for
Summary of the content on the page No. 7
Remote control Product overview 1 Main unit 2 18 3 4 17 16 5 1 2 3 6 4 5 6 7 15 14 a 2 (Standby-on) 8 • Turn on the DVD player or switch to 9 13 standby mode. 10 12 b Disc compartment 11 c Display panel d Z (Open/Close) • Open or close the disc compartment. e u (Play/Pause) a 2 (Standby-On) • Start, pause or resume disc play. • Turn on the DVD player or switch to standby mode. f (USB) socket • Press and hold to turn off the DVD • Connect a USB ash drive. player and all HDMI CEC complian
Summary of the content on the page No. 8
d v V b B (Navigation buttons) m AUDIO/CREATE MP3 • Navigate through the menus. • Select an audio language/channel. • Search fast-forward (B) or fast- • Access the menu to create MP3. backward (b). Press repeatedly to n x (Stop) change the search speed. • Stop disc play. • Search slow-forward (v) or slow- backward (V). Press repeatedly to o u (Play/Pause) change the search speed. • Start, pause or resume disc play. e BACK p INFO • Return to the previous display menu. • For disc, display th
Summary of the content on the page No. 9
• Option 1: Connect to HDMI socket (for a 3 Connect HDMI, DVI or HDCP-compliant TV). • Option 2: Connect to component video sockets (for a standard TV or Progressive Make the following basic connections to use the DVD player. Scan TV). • Option 3: Connect to scart socket (for a standard TV). Basic connections: • Option 4: Connect to video (CVBS) socket • Video cables (for a standard TV). • Audio cables Note Optional connections: • Audio to other devices: • You must connect this DVD play
Summary of the content on the page No. 10
Option 2: Connect to component Option 3: Connect to scart socket video sockets Pr Pb Y Y Pr COMPONENT COMPONENT VIDEO OUT VIDEO IN 1 Connect a scart cable (not supplied) to the 1 Connect the component video cables (not TV OUT socket on this DVD player and supplied) to the Y Pb Pr sockets on this the scart input socket on the TV. DVD player and the component video input sockets on the TV. Tip • If a progressive scan TV is used, you may turn on the progressive scan mode • This type of
Summary of the content on the page No. 11
Connect audio cables Route audio to other devices Connect the audio from this DVD player to the Route the sound from this DVD player to other TV to allow sound output through the TV. devices to enhance audio play. AUDIO IN Connect to digital ampli er/receiver DIGITAL IN DIGITAL OUT 1 Connect the audio cables (not supplied) to the AUDIO OUT L/R sockets on this COAXIAL DVD player and the audio input sockets on the TV. 1 Connect a coaxial cable (not supplied) to the COAXIAL/DIGITAL OUT so
Summary of the content on the page No. 12
Connect to analogue stereo system Connect USB device AUDIO IN 1 Connect the USB ash drive to the 1 Connect the audio cables (not supplied) to (USB) socket on this DVD player. the AUDIO OUT L/R sockets on this DVD player and the audio input sockets on the device. Note • This DVD player can only play/view MP3, WMA, DivX or JPEG les that are stored on such devices. Tip • Press to access the content and play the les. • You can optimise the audio output (see chapter ‘Adjust settin
Summary of the content on the page No. 13
Navigate through the menu 4 Get started 1 Point the remote control directly at the remote sensor on this DVD player and select the desired function. Prepare the remote control 1 Push to open the battery compartment cover. 2 Use the following buttons on the remote control to navigate through the on-screen 2 Insert two R03 or AAA batteries type with menus. correct polarity (+/-) as indicated. 3 Close the battery compartment. Button Action Move up or down. v V Caution Move left or r
Summary of the content on the page No. 14
Find the correct viewing Select menu display language channel Note 1 Press 2 to turn on the DVD player. • You can skip this setting if this DVD player is connected to a HDMI CEC compliant TV. It switches 2 Turn on the TV and switch to the correct automatically to the same OSD menu language as per your TV setting. video-in channel. • You may go to the lowest channel on 1 Press SETUP. the TV, then press the Channel Down [ General Setup ] menu is displayed. button on the TV remote contr
Summary of the content on the page No. 15
8 You can now turn on the progressive scan Turn on Progressive Scan mode on the TV (see the TV user manual). Connect a progressive scan TV with Note component video sockets (see chapter ‘Connect video cables - Option 2: Connect to • The progressive scan setting will not be available component video sockets’ for details). when the HDMI video signal is detected. • During play, when progressive scan mode is on for both this DVD player and the TV, distorted picture 1 Turn on the TV to the co
Summary of the content on the page No. 16
Use Philips EasyLink The DVD player supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink- compliant devices that are connected through HDMI connectors can be controlled by a single remote control. Philips does not guarantee 100% interoperability with all HDMI CEC devices. 1 Turn on the HDMI CEC operations on the TV and other connected devices. See TVs/ devices manual for details. 2 You can now enjoy the following Philips EasyLink controls.
Summary of the content on the page No. 17
Tip 5 Play • If the password entry menu is displayed, you have to enter the password before it can be played. • If you pause or stop a disc for about 5 minutes, the screen saver activates. To deactivate the screen saver, press DISC MENU. • After you pause or stop a disc, if no buttons Play from disc are pressed within 15 minutes, this DVD player automatically switches to standby mode. Note • DVDs and DVD players are designed with regional restrictions. Ensure that the DVD video you pl
Summary of the content on the page No. 18
Change video play Play video 1 Play a title. Note 2 Use the remote control to change the • For video disc, play always resumes from the point video play. where it was last stopped. To start play from the beginning, press í while the message is displayed. Button Action AUDIO/ Change audio language. CREATE MP3 • Only applicable to discs Control a title with multiple audio language or channel. 1 Play a title. Change subtitle language. SUBTITLE 2 Use the remote control to control the title
Summary of the content on the page No. 19
Note Preview disc contents Some operations may not work with some discs. See • the information accompanying the disc for details. . Access DVD menu 1 During play, press INFO. The disc status menu is displayed. 2 Select [ Preview ], then press B. DVD 1 Press DISC MENU to access disc main menu. 2 Select a play option, then press OK. Select Digest Type: • In some menus, press the numeric Title Digest buttons to input your selection. Chapter Digest • To return to the title menu during play,
Summary of the content on the page No. 20
Quick skip play to a speci c time View DVD play from different angles 1 During play, press INFO. 1 During play, press INFO. The disc status menu is displayed. The disc status menu is displayed. 2 Select the current elapsed playing time, 2 Select [ Angle ], then press B. then press B. 3 Press the numeric buttons to change the • [ TT Time ] (title time) angle. • (chapter [ CH Time ] time) Play changes to the selected angle. • (disc [ Disc Time ] time) • (track [ Track Time ] time) No
