Summary of the content on the page No. 1
DVD HOME THEATRE SYSTEM
HTS3100
HTS3101
HTS3105
User Manual 6
使用说明书 50
English
Summary of the content on the page No. 2
CAUTION LASER Use of controls or adjustments or performance Type Semiconductor laser GaAIAs of procedures other than herein may result in Wave length 650 - 660 nm (DVD) hazardous radiation exposure or other unsafe 784 - 796 nm (CD) operation. Output Power 7 mW (DVD) 10 mW (VCD/CD) Beam divergence 60 degrees ATTENTION! For Customer Use: Read carefully the information located at the bottom or rear of your DVD Home Theatre System and enter below the Serial No
Summary of the content on the page No. 3
Manufactured under license from Dolby Laboratories, “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. Noís. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U.S. and world-wide patents issued and pending. “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2003 Digital Inc. All Rights Reserved.
Summary of the content on the page No. 4
Language Code 4
Summary of the content on the page No. 5
Index English ------------------------------------ 6 ------------------------------50 5 English
Summary of the content on the page No. 6
English Table of contents General General Information ........................................................................................................8 Setup precautions .................................................................................................................................................8 Accessories supplied ...........................................................................................................................................8 Cleaning dis
Summary of the content on the page No. 7
Table of contents Other playback features for video discs (DVD/VCD/SVCD) ...............................................................26 Using the Disc Menu ..................................................................................................................................26 Viewing playback information ..................................................................................................................27 Resuming playback from the last stopped point................
Summary of the content on the page No. 8
English General Information CAUTION! Accessories supplied The machine does not contain any user-serviceable parts. Please leave – 1 passive subwoofer all maintenance work to qualifi ed – 4 satellite speakers personnel. – 1 centre speaker – 1 remote control with batteries – 1 composite video cable (yellow) Setup precautions – 1 FM wire antenna – 1 MW loop antenna Finding a suitable location – Quick Start Guide – Place the set on a fl at, hard and stable surface. Do not place the set on a c
Summary of the content on the page No. 9
Main Unit 1 3 4 5 6 7 8 9 2 f SOURCE a STANDBY ON 2 – Selects the relevant active source mode: – Turns on the system or turns off to Eco DISC, TUNER (FM/MW), TV or AUX. Power standby mode. g VOL b Disc tray – Adjusts the volume level. c OPEN CLOSE ç h MIC LEVEL – Opens/ closes the disc tray. – Activates microphone level mode and use the VOLUME control to set the d System display panel microphone volume level. e u (PLAY PAUSE) i MIC – DISC: starts/pauses playback. – For connecting
Summary of the content on the page No. 10
English Remote Control c ZOOM – Enlarges a picture on the TV screen. d AUDIO 1 – Selects an audio language (DVD) or an 2 audio channel (CD). 3 e SETUP 4 – Enters or exits the system setup menu. 5 f DISPLAY – Displays the current status or disc information. 6 g PLAY É – DISC: starts playback. 7 h STOP Ç 8 – Exits an operation. – DISC: stops playback. 9 – DISC: hold down this button to open and close the disc tray. – TUNER: hold down this button to erase the current preset radio station. 10 i
Summary of the content on the page No. 11
Remote Control (continued) m SUBTITLE – Selects a DVD subtitle language. n ANGLE – Selects a DVD disc camera angle (if available). 13 o DISC MENU 14 – For DVD, enters or exits disc contents menu. 15 – For VCD/SVCD, enters digest menu. 16 p 17 – DISC: selects movement direction in the menu. 18 – TUNER: press left or right to tune the 19 radio frequency. – TUNER: press up or down to start auto 20 search. 21 q OK – Confi rms a selection. 22 r RETURN/TITLE – For DVD, go back to the previous
Summary of the content on the page No. 12
English Remote Control (continued) CAUTION! Using the remote control – Remove batteries if they are exhausted or if the remote control is not to be used for a long time. – Do not mix batteries (old and new or carbon and alkaline, etc.). – Batteries contain chemical substances, so they should be disposed of properly. A Open the battery compartment. B Insert two batteries type R03 or AAA, following the indications (+-) inside the compartment. C Close the cover. D Point the remote control directly
Summary of the content on the page No. 13
Basic Connections Helpful Hints: Step 1: Placing the speakers – The placement diagram shown here is only a guideline that will provide great system The Philips Home Theatre System is performance. You may fi nd other placement simple to install. However, proper choices that are more suitable for your room system placement is critical to ensure an layout and provide the sound experience you optimum sound experience. enjoy. – To avoid magnetic interference, do not position the front speaker
Summary of the content on the page No. 14
English Basic Connections (continued) SUBWOOFER FRONT FRONT LEFT RIGHT CENTER REAR LEFT REAR RIGHT Step 2: Connecting the speakers and subwoofer Connect all the speakers and subwoofer to the speaker sockets at the rear of the DVD system. Make sure that the colours of the plugs and sockets are matched. Helpful Hint: – To prevent unwanted noise, do not place the speakers too close to the DVD system, AC power adapter, TV or any other radiation sources. TIPS: Before making or changing an
Summary of the content on the page No. 15
Basic Connections (continued) Option 2 OR Option 1 Option 2: Connecting to a Step 3: Connecting to TV Progressive Scan TV or component video input This connection enables you to view the playback from this DVD system. You only The progressive scan video quality is only need to choose one of the options available when using Y Pb Pr connection below to make your video connection. and a progressive scan TV is required. It – For a standard TV, follow option 1. provides superior picture qual
Summary of the content on the page No. 16
English Basic Connections (continued) fi x the claw into the slot TV FM antenna 2 MW 1 antenna Step 4: Connecting the FM/ Step 5: Connecting the MW antennas power cord After everything is connected A Connect the supplied MW loop antenna properly, plug the AC power cord to the MW socket. Place the MW loop into the power outlet. antenna on a shelf, or attach it to a stand The Eco Power LED on the DVD system or wall. will light up. Never make or change any connections with the power turn
Summary of the content on the page No. 17
Optional Connections Connecting audio from TV Connecting audio from an analogue audio/video device When connecting the audio output from your TV to this Home Theatre Audio You can connect the audio output from System, you can enjoy the multi-channel an analogue audio/video device (e.g. VCR, surround sound capabilities. Cable/Satellite Box or TV) to this Home Theatre Audio System in order to enjoy Use an audio cable (red/white - not the multi-channel surround sound supplied) to connect
Summary of the content on the page No. 18
English Getting Started Step 1: Turning on the DVD Step 2: Finding the correct system viewing channel A Press STANDBY ON (2). Before you start ... Make sure you have completed all the B Press the SOURCE button on the front necessary connections. panel repeatedly to select : DISC FM MW TV AUX A Press SOURCE button until “DISC” DISC .... appears on the display panel. B Turn on the TV and set it to the correct video-in channel. You should see the blue DVD background screen on
Summary of the content on the page No. 19
Getting Started (continued) Audio, Subtitle and Menu language Step 3: Setting language for DVD playback preferences You can select your preferred language settings for DVD playback. If the The language options are different selected language is recorded on the depending on your country or region. It DVD disc, the DVD system will may not correspond to the illustrations automatically play the disc in that shown on the user manual. language. Otherwise, the disc’s default language will
Summary of the content on the page No. 20
English Getting Started (continued) If the language you want is not Step 4: Setting the TV available in the list, select { Others }. Use the numeric keypad (0-9) on the remote control to enter the 4-digit Selecting the matching colour language code ‘XXXX’ (see page 4) and system press OK to confi rm. The colour system of the DVD system, E Repeat steps C ~ D for other settings. DVD and TV should match. Only then will it be possible to play a DVD on this Helpful Hints: system. Before cha
