Summary of the content on the page No. 1
Introduction Connections Basic Setup Recording Playback Editing Function Setup Others Español
Owner's Manual
H2080MW8
HDD & DVD PLAYER / RECORDER
WITH DIGITAL TUNER
THANK YOU FOR CHOOSING MAGNAVOX.
NEED HELP FAST?
READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE USING
YOUR MAGNAVOX PRODUCT MORE ENJOYABLE.
IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,
YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.FUNAI-CORP.COM
OR CALL 1-800-605-8610 WHILE WITH YOUR PR
Summary of the content on the page No. 2
PRECAUTIONS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS WARNING: APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an CAUTION equilateral triangle, is intended to alert the user to the RISK OF ELECTRIC SHOCK presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude DO NOT OPEN to constitute a risk of electric shock to persons. : CAUTION The exclamation point within an equilateral trian
Summary of the content on the page No. 3
Introduction Introduction Connections Connections Basic Setup Basic Setup Recording Recording Playback Playback Editing Editing Function Setup Function Setup Others Others Español Español PRECAUTIONS Important Safeguards 1. Read Instructions - All the safety and operating instructions information with regard to proper grounding of the mast and should be read before the appliance is operated. supporting structure, grounding of the lead-in wire to an 2. Retain Instructions- The safety and o
Summary of the content on the page No. 4
PRECAUTIONS Installation Location Supplied Accessories For safety and optimum performance of this unit: remote control (NB504UD) with batteries (AAAx2) • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. • Shield it from direct sunlight and keep it away from devices of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not
Summary of the content on the page No. 5
Introduction Introduction Connections Connections Basic Setup Basic Setup Recording Recording Playback Playback Editing Editing Function Setup Function Setup Others Others Español Español PRECAUTIONS Maintenance Servicing IR signal check • Please refer to relevant topics on “TROUBLESHOOTING” If the remote control does not work properly, you can test on pages 105-108 before returning the product. if the remote control sends out the infrared signal with • If this unit becomes inoperative, do not
Summary of the content on the page No. 6
CONTENTS Introduction Recording PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INFORMATION ON RECORDING . . . . . . . . . . . . . . . . . . 37 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 BEFORE RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Symbols Used in this Owner's Manual . . . . . . . . . . . . . . .9 Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . . 39 FUNCTIONA
Summary of the content on the page No. 7
Introduction Introduction Connections Connections Basic Setup Basic Setup Recording Recording Playback Playback Editing Editing Function Setup Function Setup Others Others Español Español CONTENTS Playback Editing INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 58 INFORMATION ON EDITING. . . . . . . . . . . . . . . . . . . . . . 74 Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 8
FEATURES This unit not only plays back the contents on internal HDD, DVD, or CD, but also offers features for you to record on HDD or DVD and edit them after that. The following features are offered with this unit. Recording Playback This unit allows you to record on the HDD, a DVD+RW/- HDD DVD RW (rewritable) and a DVD+R/-R (one-time write). You can Theater surround sound in your home: choose any one for your convenience. Even if you choose When connecting the unit to an amplifier or a dec
Summary of the content on the page No. 9
Introduction Introduction Connections Connections Basic Setup Basic Setup Recording Recording Playback Playback Editing Editing Function Setup Function Setup Others Others Español Español FEATURES Compatibility Symbols Used in this Owner's Manual Available for playing back discs on a regular DVD To specify for which media type each function is, we put player: the following symbols at the beginning of each item to Recorded discs can be played back on regular DVD operate. players, including co
Summary of the content on the page No. 10
FUNCTIONAL OVERVIEW Front Panel 1 2 3* 4 5 6 7 8*910 14 13 12 11 ( ) The unit can also be turned on by pressing these buttons. * 1. STANDBY-ON y y button 10. CHANNEL / buttons Press to turn the unit on and off. Use to connect external device with a RCA audio 2. Disc tray cable. Place a disc when opening the disc tray. 11. AUDIO input jacks (E2) 3. OPEN/CLOSE A button* Use to connect external device with a RCA audio Press to open or close the disc tray. cable. 4. Display 12. VI
Summary of the content on the page No. 11
Introduction Introduction Connections Connections Basic Setup Basic Setup Recording Recording Playback Playback Editing Editing Function Setup Function Setup Others Others Español Español FUNCTIONAL OVERVIEW Rear Panel 1 2 3 4 VIDEO VIDEO Y IN OUT IN PB/CB L L OUT R R IN PR/CR OUT COAXIAL AUDIO IN COMPONENT DIGITAL AUDIO OUTPUT ANTENNA S-VIDEO AUDIO OUT S-VIDEO (E1) VIDEO OUT PCM/BITSTREAM 11 10 9 8 7 6 5 1. ANTENNA IN jack 8. AUDIO OUT jacks Use to connect an antenna. Use to connect a TV mo
Summary of the content on the page No. 12
FUNCTIONAL OVERVIEW Remote Control Installing the Batteries in the Remote Control Using a Remote Control Install the batteries (AAAx2) matching the polarity Keep in mind the following when using the remote control: indicated inside battery compartment of the remote • Make sure that there are no obstacles between the remote control. control and the infrared sensor window on the unit. • Remote operation may become unreliable if strong Open the cover. sunlight or fluorescent light is shining o
Summary of the content on the page No. 13
Introduction Introduction Connections Connections Basic Setup Basic Setup Recording Recording Playback Playback Editing Editing Function Setup Function Setup Others Others Español Español FUNCTIONAL OVERVIEW ( ) The unit can also be turned on by pressing these buttons. * 1. DISPLAY button 20. CLEAR button • Press to display the display menu on or off. • Press to clear the information once entered, to clear 2. DTV/TV button the marker settings, or to cancel the programming • Press to
Summary of the content on the page No. 14
FUNCTIONAL OVERVIEW Front Panel Display 2 3 DTV BS CS DR CD 1 PM VCR 4 DB HDD DVD 5 1. 4. Current status of the unit 5. Displays the following : Appears in the afternoon • Elapsed playback time : Appears when playback is PM with the clock display. paused. • Current title / chapter / track / file number 2. : Appears when playing back • Recording time / remaining time a disc. : Appears when the channel DTV • Clock is in DTV mode. : Appears when the timer • Channel number programming or O
Summary of the content on the page No. 15
Introduction Connections Basic Setup Recording Playback Editing Function Setup Others Español ANTENNA CABLE CONNECTION This section describes how to connect your unit to an antenna, cable box, etc. Disconnect the power cord of your TV from the AC outlet. 1 Disconnect RF coaxial cable from antenna input jack of your TV. 2 rear of your TV VHF / UHF antenna 2 1 1 1 disconnect disconnect or ANT. IN RF coaxial cable cable TV company Connect cables to the unit. 3 Make the basic connection as illus
Summary of the content on the page No. 16
RF MODULATOR CONNECTION If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a commercially available stereo audio/video RF modulator. In this case, follow the instructions below. 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a modulator/ante
Summary of the content on the page No. 17
Introduction Connections Basic Setup Recording Playback Editing Function Setup Others Español CONNECTION TO A CABLE / SATELLITE BOX 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) Plug in the power cords of the devices to the AC outlet. e.g.) satellite rear of your TV dish This connection is for TV loop through only VIDEO IN AUDIO IN R L or ANT. IN cable TV RCA audio company cable RCA video cable rear of this unit RF coaxial cab
Summary of the content on the page No. 18
CONNECTION TO A TV Make one of the following connections, depending on the capabilities of your existing device. Method 1 Method 2 Method 3 analog audio standard picture good picture better picture TV COMPONENT VIDEO S-VIDEO IN VIDEO IN IN AUDIO IN Y R L (Green) PB/CB (Blue) PR/CR (Red) RCA S-video video component and or or cable cable video cable RCA VIDEO audio cable (Green) this unit OUT Y L VIDEO VIDEO Y PB/CB IN OUT IN VIDEO VIDEO (Blue) L L OUT OUT OUT L R R IN AUDIO IN ANTENNA ( ) S-VI
Summary of the content on the page No. 19
Introduction Connections Basic Setup Recording Playback Editing Function Setup Others Español CONNECTION TO AN AUDIO SYSTEM • When you change the connections, all devices should be turned off. • Refer to the manual accompanying external devices for more information. 2 Channel Analog Audio Connection Digital Audio Connection stereo system Dolby Digital decoder, MD deck or DAT deck audio COAXIAL AUDIO IN R L digital audio coaxial input analog audio jack input jacks RCA audio cable digital audio
Summary of the content on the page No. 20
BEFORE YOU START After you have completed all the connections, you must find the viewing channel (external input channel) on your TV. Finding the Viewing Channel on Your TV After you have made all the necessary connections, press ST STANDBY ANDBY-ON -ON 1 [STANDBY-ON y y] to turn on the unit. SOURCE DTV/TV DISPLAY OPEN/CLOSE Turn on your TV. A • If connected to your VCR make sure it is .@/: ABC DEF switched off or in standby mode before 123 2 proceeding. GHI JKL MNO 456 PQRS TUV WXYZ Pres
