Summary of the content on the page No. 1
R
Model DV8300 User Guide
SACD/DVD Player
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
Summary of the content on the page No. 2
CONGRATULATIONS ON YOUR PURCHASE OF THIS CAUTION FINE MARANTZ PRODUCT. • Use of controls or adjustments or performance of MARANTZ is on the leading edge of SACD DVD research for procedures other than those specified herein may result consumer products and this unit incorporates the latest in hazardous radiation exposure. technological developments. • The use of optical instruments with this product will We are sure you will be fully satisfied with the SACD DVD increase eye hazard. player. Thank
Summary of the content on the page No. 3
English Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. • This player is not suitable for commercial use. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the CAUTION presence of uninsulated “dangerous voltage” within the RISK OF ELECTRIC SHOCK product’s enclosure that may be of suffi
Summary of the content on the page No. 4
WARNING: Slot and openings in the cabinet are provided for ventilation and to ensure reliable operation of the prod- uct and to protect it from overheating, to prevent fire haz- THX ard, the openings should never be blocked and covered with items, such as newspapers, table-cloths, curtains, etc. Also do not put the apparatus on the thick carpet, bed, sofa, or fabric having a thick pile. With their experience in movie making and DVD mastering, Lucasfilm engineers researched the capabilities of
Summary of the content on the page No. 5
English Table Of Contents 1 Before You Start 6 Playing MP3s Features .................................................................................... 6 Playing MP3s ........................................................................ 35 What’s in the box ................................................................... 7 Searching for folders and tracks ...................................... 36 Putting the batteries in the remote control .................... 7 Using random play .......
Summary of the content on the page No. 6
1 Before You Start Features 525 line digital progressive-scan High quality 24-bit/192kHz DAC The high specification 24-bit/192kHz DAC component video output delivers dynamic, smooth and expansive analog Compared to standard interlaced video, progres- sound from CDs and DVDs. sive scan effectively doubles the amount of video information fed to your TV or monitor. The result Graphical Setup Navigator is a stable, flicker-free image. (Check your TV/ monitor for compatibility with this feature.) Set
Summary of the content on the page No. 7
English 1 Before You Start Using the remote control What’s in the box Keep in mind the following when using the Thank you for buying this MARANTZ prod- remote control: uct. Please confirm that the following accessories are in the box when you open it. • Make sure that there are no obstacles between the remote and the remote sensor on the unit. • Remote control • Use within the operating range and angle, as • AA/R6P dry cell batteries x2 shown. • Audio/Video cable (yellow/red/white) • System cont
Summary of the content on the page No. 8
1 Before You Start • When playing a DVD-RW disc that was edited Discs compatible with this player on a DVD recorder, you may see scenes from Any disc that displays one of the following just before the edited point. logos should play in this player. Other formats, including DVD-RAM, DVD-ROM, • Up to 20 characters of a title name can be CD-ROM (except those that contain MP3 displayed. files) and Photo CD will not play. Audio CD compatibility: DVD Video compatibility: • Logos: • Logos: • 12c
Summary of the content on the page No. 9
English 1 Before You Start DVD Video regions Caution! • DVD-R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens. • If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for
Summary of the content on the page No. 10
2 Connecting Up Easy Setup Important This easy setup is the minimum set of connec- Before making or changing any rear panel connections, tions you need to start watching DVD video make sure that all components are switched off and discs. Both sound and picture are fed directly to unplugged from the wall outlet. your TV using the supplied audio and video cables. For other possible connections, see pages 11 and 12. Connect to a composite video input 1 on your TV using the supplied Audio/ Video ca
Summary of the content on the page No. 11
English Connecting Up 2 Important Home theater video connections Before making or changing any rear panel connections, This player outputs video in a number of different make sure that all components are switched off and ways. Choose the one most suitable for your unplugged from the wall outlet. system using the guide below. If your TV has a component video input, we recommend using it to 1 connect directly to the COMPONENT VIDEO OUT of this player. Use the standard 3-jack component video ouput
Summary of the content on the page No. 12
COAX OPTICAL 2 Connecting Up Home theater audio connections This player outputs multi-channel audio in both Important analog and digital form. Check the manual for Before making or changing any rear panel connections, your amplifier/receiver to see what equipment it make sure that all components are switched off and is compatible with (especially which digital unplugged from the wall outlet. formats—Dolby Digital, DTS, etc.—it can decode). If your amplifier has 5.1 channel If your amplifier has
Summary of the content on the page No. 13
English Controls & Displays 3 Display 1 2 34 56 7 8 9 0 - = ~ ! @ # $% - V PART 192kHz SURROUND GRP VCD 96kHz LAST COND 5.1CH TITLE D OFF TRK CHP TOTAL REMAIN DOWN MIX ^ & * ( ) _ ¡ ™ £ ¢ + 1 3 – Lights when a disc is playing 17 5.1CH – Lights when the audio ouput is set to 5.1 channel 2 V-PART – Lights during playback of the video part of DVD discs 18 DOWNMIX – Lights when multi-channel DVD-Audio, Dolby Digital, DTS or MPEG 3 Lights during a multi-angle section of a DVD- audio is downmixed, for
Summary of the content on the page No. 14
3 Controls & Displays Remote control 1 VIDEO ON/OFF – press to turn video output off and on (page 51) 1 $ 2 OPEN/CLOSE – Disc tray open/close 2 % 3 Number buttons – pages 21, 22 4 RETURN – Return ^ 5 PROGRAM – pages 27, 38 3 6SETUP – pages 17, 39 4 & 7 Joystick / ENTER button – page 22 5 * 8 7 – Stop 9 4¢ – Skip 6 ( 108 – Pause 7 11 RANDOM – pages 29, 36 12 F.MEMO – Function memory (page 33) 8 ) 13 VIDEO ADJ. – Video adjust (page 49) 9 14 DISPLAY – pages 34, 36 0 15 ANGLE – page 25 - _ 16LAST M
Summary of the content on the page No. 15
English Controls & Displays 3 Front panel 1 2 34 5 SACD/DVD PLAYER DV8300 PAUSE STOP PLAY STANDBY V-PART 192kHz SURROUND GRP VCD 96kHz LAST COND 5.1CH POWER ON/OFF TITLE D OFF TRK CHP TOTAL REMAIN DOWN MIX OPEN/CLOSE FL OFF 6 7 8 9 0 1 POWER ON/OFF 7 FL OFF – Lights when the display is switched off using the FL OFF button and DIMMER 2 Disc tray button on the remote unit. 3 8 – Pause 8 0 – Disc tray open/close 4 7 – Stop 9 4 /1 – Reverse scan/skip 5 3 – Play 10¡ /¢ – Forward scan/skip 6Display –
Summary of the content on the page No. 16
4 Getting Started Using the FL menu (Example) * DISP OFF The FL menu has been designed to set “DISP MODE”, “AUTO P OFF” and DISP ON “REMOT CODE”. The FL menu can not be used if a disc is * Factory setting playing. Press ENTER you want to set. It is recommended to set the FL menu The menu select is set. before loading a DVD. • If you replay a CD or SACD while DISP ON is If a DVD has been loaded, be sure to press selected, FL display and video output shut off STOP 7 twice before proceeding. automa
Summary of the content on the page No. 17
English Getting Started 4 Using the Setup Navigator Before playing any discs, we strongly recommend using the Setup Navigator. This makes all the basic DVD player settings for you. 1 Press POWER button on the front panel to switch on. Also turn on your TV and make sure that it is set to the correct video input. • The POWER button on the remote switches the player between standby and on. • If a disc that’s already loaded starts to play, press 7 to stop it. Note When it is required to remote cont
Summary of the content on the page No. 18
4 Getting Started 4 Choose an OSD menu language. 7 If you selected 5.1 Channel audio connec- tions in step 6, confirm which speakers are Audio1 A2 Video1 V2 Language General Setup Navigator connected to your amplifier. English français Deutsch Language Audio1 A2 Video1 V2 Language General OSD Language Italiano Setup Navigator Español Select the On Screen Language Amp Connection Center Speaker PresentDolby Digital/DTS ENTER SETUP Move Select Exit Not Present Center speaker is connected to an ampl
Summary of the content on the page No. 19
English Getting Started 4 9 Confirm whether your amplifier is compat- ible with 96kHz audio. Audio1 A2 Video1 V2 Language General Setup Navigator Amp Connection No 96kHz PCM Audio Yes Don't Know Digital jack not compatible with 96kHz ENTER SETUP Move Select Exit • You won’t see this screen if you selected Not Connected in step 8. • Selecting Don’t Know has the same effect as selecting No: any 96kHz audio will be downsampled to 48kHz. This is a more compat- ible sampling frequency. See Sampling f
Summary of the content on the page No. 20
4 Getting Started Playing discs The basic playback controls for playing discs are covered here. Further functions are detailed in the next chapter. Note Throughout this manual, the term ‘DVD’ means DVD-Video, DVD- Audio and DVD-R/RW. If a function is specific to a particular kind of DVD disc, it is specified. 1 Switch the player on. If you’re playing a DVD or Video CD, also turn on your TV and make sure that it is set to the correct video input. 2 Press OPEN/CLOSE to open the disc tray. 3 Load
