Summary of the content on the page No. 1
V9970QMH.NA1ULL_ENG_16T
DVD Player &
Video Cassette Recorder
OWNER’S MANUAL
MODEL : LDX-514
Before connecting, operating or adjusting this
product, please read this owner’s manual
carefully and completely.
For service/
support Call:
Toll Free Number
1-800-243-0000
Summary of the content on the page No. 2
REGULATORY INFORMATION: FCC Part 15 CAUTION This epuipment has been tested and found to comply with RISK OF ELECTRIC SHOCK the limits for a Class B digital device, pursuant to Part 15 DO NOT OPEN of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when CAUTION: TO REDUCE THE RISK the product is operated in a residential installation. This OF ELECTRIC SHOCK product generates, uses, and can radiate radio frequency DO NOT REMOVE COVER (OR BACK)
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installa- tion, use, and servicing. This product does not contain any
Summary of the content on the page No. 4
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Contents Still Picture and Frame-by-Frame Playback . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Introduction . . . . . . . . . . . . . . . . . . . . . .5 Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . .23 Moisture Condensation . . . . . . . . . . . . . . . . . .5 CM SKIP (Commercial Skip) . . . . . . . . . . . . .23 Symbol Used in this Manual . . . . . . . . . . . . . .5 VHS Hi-Fi Stereo/MTS Broadcast . .
Summary of the content on the page No. 5
Introduction To ensure proper use of this product, please read this About the Symbol Display owner’s manual carefully and retain for future refer- “ ” may appear on your TV display during opera- ence. tion and indicates that the function is not permitted by this unit or the disc. This manual provides information on the operation and maintenance of your DVD+VCR. Should the unit require service, contact an authorized service loca- tion. Notes on Discs Handling Discs Do not touch the playback side
Summary of the content on the page No. 6
Types of Playable Discs Notes on Copyrights: It is forbidden by law to copy, broadcast, show, DVD broadcast via cable, play in public, or rent copyright- (8 cm / 12 cm disc) ed material without permission. This product features the copy protection function Video CD (VCD) developed by Macrovision. Copy protection signals (8 cm / 12 cm disc) are recorded on some discs. When recording and playing the pictures of these discs picture noise will Audio CD appear. This product incorporates copyright
Summary of the content on the page No. 7
Title (DVD only) Disc-related terms A title is generally a distinct section of a DVD disc. For example the main feature could be title 1, a docu- DVD ±R / DVD ±RW mentary describing how the film was made could be DVD -R and DVD +R are two different standards for title 2, and cast interviews could be title 3. Each title recordable DVD drives and discs. This format allows is assigned a reference number enabling you to information to be recorded onto the DVD disc only locate it easily. once. DVD +
Summary of the content on the page No. 8
Card useable on this unit Using Memory Card Card useable on this unit Using Memory Card • Compact Flash Card (CF) 1. Insert a memory card. • Micro Drive (MD) 2. Press MEMORY on the Front panel in the DVD • Secure Digital Card (SD) mode. • Multi Media Card (MMC) The Memory Card slot choice menu appears on the TV screen. • SmartMedia Card (SMC) • Memory Stick (MS) • Memory Stick Pro (MS-Pro) 1 2 • Compatible with: FAT 12, FAT 16, or FAT 32 • Only use the memory cards recommended above. 3. Use v/V
Summary of the content on the page No. 9
Front Panel abd c e fg DVD VCR REC PM TV hn ijklm opqrstuv a 1 POWER button and indicator DVD+VCR is in timer recording or a timer Switches the DVD+VCR ON and OFF. recording is programmed (VCR part only). Lights green when the DVD+VCR is turned on. A cassette is in the VCR deck. b DVD indicator Indicates the active DVD deck. The VCR deck is selected. VCR c Disc Tray (DVD deck) DVD+VCR is Recording.(VCR part only) REC Insert a disc here. d Z Z OPEN/CLOSE Indicates PM time. (AM is not displayed
Summary of the content on the page No. 10
Remote Control DISC MENU Accesses menu on a DVD disc. DISPLAY Accesses On-Screen Display. CLK/CNT Switches between the clock, tape counter and tape remaining modes on the display. DVD Select the DVD+VCR function mode to DVD. EJECT Ejects the tape in the VCR deck. OPEN/CLOSE Opens and closes the disc tray. ENTER Confirms menu selections. Displays functions on the TV screen. INPUT Selects the VCR deck’s source (Tuner, LINE 1, or LINE 2). LOCK Locks/unlocks front panel buttons. MARKER Mar
Summary of the content on the page No. 11
Rear Panel Caution Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. abcde f gh j k i a ANT.IN g RF. OUT Connect the VHF/UHF/CATV antenna to this terminal. Connect to a TV with RF coaxial inputs. b VCR IN LINE 1 (VIDEO/AUDIO (Left/Right)) h COAXIAL (DIGITAL AUDIO OUT jack) Connect the audio/video output of an external source (DVD OUT) (Audio system, TV/Monitor, VCR, Camcorder). Connect to digital (coaxial) audio equipme
Summary of the content on the page No. 12
To view or record a CATV channel Connecting an Antenna Connecting an Antenna 1. Tune the TV to the DVD+VCR output channel or Cable TV or Cable TV (CH 3 or 4). 2. Set the DVD+VCR channel selector to the cable a a Antenna: output channel. (Example: CH3) Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm 3. Select a channel using the cable converter. coaxial cable connect it directly to the jack marked ANT.IN on your DVD+VCR. If your antenna ca
Summary of the content on the page No. 13
RF coaxial connection Optional TV Connections Optional TV Connections Connect the RF.OUT jack on the DVD+VCR to the These connections support only DVD playback. The antenna in jack on the TV using the supplied 75-ohm tuner and VCR still output through the RF.OUT (R) or Coaxial Cable (R). DVD/VCR OUT (A, V) jacks. How to set the DVD+VCR’s RF output S-Video connection channel Connect the S-VIDEO OUT jack on the DVD+VCR to the S-Video in jack on the TV using the optional 1. When the DVD+VCR is
Summary of the content on the page No. 14
HDMI Connection HDMI Connection HDMI compatible TV HDMI If you have a HDMI TV or monitor, you can connect it to this DVD+VCR using a HDMI cable. 1. Connect the HDMI OUT jack on the DVD+VCR to the HDMI jack on a HDMI compatible TV or H monitor (H). 2. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). 3. In stop mode, select HDMI mode by pressing HDMI on the front panel. “hdmi” will appear on the display window. Rear of DVD+VCR Notes : • No sound will be output from HDMI cable if the [D
Summary of the content on the page No. 15
Connection to an Amplifier Connection to an Amplifier Rear of DVD+VCR You can only listen to DVD playback using OPTICAL (O), COAXIAL (X) and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See page 12.) Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro A1 A2 X Logic Connect the Left and Right AUDIO OUT (or DVD/VCR AUDIO OUT) jacks on the DVD+VCR to the audio left and right in jack
Summary of the content on the page No. 16
• AUTO CLOCK SET Initial Settings - VCR Initial Settings - VCR The Auto Clock Set feature is set to ON at the fac- tory. In the ON setting, the DVD+VCR looks for a By using the VCR Setup menu, you can make channel carrying XDS (Extended Data Services) various adjustments to items such as clock setting, information. XDS updates the clock using the and timer recordings. Coordinated Universal Time. Your DVD+VCR allows remote control adjustment of - Use b/B to choose ON or OFF. several features.
Summary of the content on the page No. 17
TUNING SETUP This DVD+VCR is equipped with a frequency synthe- sized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Auto Channel Programming FUNCTION OSD The on-screen display can be turned on or off. AUDIO MODE The DVD+VCR has two separate audio playback sys- tems, the high quality VHS Hi-Fi system and standard 1. Choose the SOURCE SELECT option, then use NORMAL mono system. The same audio is generally b/B to select
Summary of the content on the page No. 18
LANGUAGE Initial Settings - DVD Initial Settings - DVD By using the DVD Setup menu, you can make vari- ous adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 18 to 21. To display and exit the Menu: Press SETUP to display the menu. A second press of SETUP will take you back to initial screen. To go to the next level: Menu Language Press B on the remote control. Selec
Summary of the content on the page No. 19
DISPLAY AUDIO Each DVD disc has a variety of audio output options. Set this unit’s AUDIO options according to the type of audio system you use. TV Aspect DVD 4:3 : Select when a standard 4:3 TV is connected. Dolby Digital/DTS/MPEG DVD 16:9 : Select when a 16:9 wide TV is connected. Bitstream: Select “Bitstream” if you connect the DVD+VCR’s DIGITAL AUDIO OUT jack to an amplifier or other equipment with a Dolby Digital, Display Mode DVD DTS or MPEG decoder. Display Mode setting works only when th
Summary of the content on the page No. 20
4. Press ENTER to confirm your rating selection, LOCK (Parental Control) then press SETUP to exit the menu. 5. Press OPEN/CLOSE (Z) to activate parental control. Password (Security Code) You can enter or change password. 1. Select “Password” on the LOCK menu then press B. 2. Follow step 2 as shown left column (Rating). Rating DVD To change the password, select the “Change”, Some movies contain scenes that may not be suit- press ENTER and input the new 4-digit code then able for children to
