Summary of the content on the page No. 1
DP170BP_AA2ALL_ENG
Portable DVD Player
Owner’s Manual
Model: DP170
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and
completely.
P/NO : MFL30593001
Summary of the content on the page No. 2
Safety Precautions CAUTION: This product employs a Laser System. CAUTION To ensure proper use of this product, please read this owner’s manual RISK OF ELECTRIC SHOCK carefully and retain it for future reference. Should the unit require mainte- DO NOT OPEN nance, contact an authorized service center. Performing controls, adjustments, or carrying out procedures other than CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK those specified herein may result in hazardous radiation exposure. DO NOT REMOVE
Summary of the content on the page No. 3
Safety Precautions (Continued) CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; The appliance is not intended for use by young children or That is, a single outlet circuit which powers only that appliance infirm persons without supervision. and has no additional outlets or branch circuits. Check the specifi- Young Children should be supervised to ensure that they do cation page of this owner's manual to be certain. not play with appliance.
Summary of the content on the page No. 4
Before Use To ensure proper use of this product, please read this owner’s About the Symbol Display manual carefully and retain for future reference. “ ” may appear on your LCD display during operation and indi- cates that the function explained in this owner’s manual is not This manual provides information on the operation and mainte- available on that specific DVD video disc. nance of your DVD player. Should the unit require service, contact an authorized service location. Notes on Discs Symbol
Summary of the content on the page No. 5
Before Use (Continued) Types of Playable Discs Notes on DVDs DVD Some playback operations of DVDs may be intentionally pro- (8 cm / 12 cm disc) grammed by software manufacturers. This unit plays DVDs according to disc content designed by the software manufacturer, Video CD (VCD) therefore some playback features may not be available or other (8 cm / 12 cm disc) functions may be added. Audio CD Regional Code (8 cm / 12 cm disc) This unit has a regional code printed on the bottom of the unit. In
Summary of the content on the page No. 6
Table of Contents Introduction • Still Picture and Frame-by-Frame Playback . . . . . . . . . . .25 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3 • Marker Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 • Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Symbol used in this Manual . . . . . . . . .
Summary of the content on the page No. 7
PUSH CLOSE CLOSE Identification of Controls 1. LCD screen Main Unit 2. Speaker 3. Power ON/OFF : Switches the player ON and OFF. 4. A/V IN/OUT : Selects the source. 5. • bBvV (left/right/up/down) Selects an item in the menu. • bB : Adjusts the COLOR/BRIGHT. 1 • ENTER : Confirms menu selection. 6. • COLOR/BRIGHT : Selects the mode of LCD adjustment Brightness → Color → OFF • SETUP : Accesses or removes setup menu. • TITLE : Displays title menu, if available. 2 • MENU : Accesses menu on a DVD dis
Summary of the content on the page No. 8
Identification of Controls (Continued) Main Unit abcde fg h a Volume Control f Remote sensor Receive the signal from the Remote Control for operation. b Earphone jack c AUDIO In/Out jack (OPTICAL OUT) g Battery charge indicator Light turns red when the battery is in charging; turns green d VIDEO In/Out jack when the battery is fully charged. h • PLAY ( B/X ): Starts playback/ Pauses playback temporarily. Note • STOP ( x ) : Stops playback. If the VIDEO IN signal is not connected in AV IN mode, t
Summary of the content on the page No. 9
Identification of Controls (Continued) a AUDIO j SUBTITLE Remote Selects an audio language (DVD). Selects a subtitle language. Control b POWER k A-B Switches DVD Player ON and OFF. Repeat sequence. c • Reverse SKIP/SEARCH ( . ) l SLOW ( t/T) Search backward*/ go to beginning Reverse/ Forward slow playback. of current chapter or track or go to m STOP ( x ) j a POWER AUDIO SUBTITLE A-B previous chapter or track. Stops playback. • Forward SKIP/SEARCH ( >) k b n ZOOM SKIP/SEARCH SLOW Search forward
Summary of the content on the page No. 10
Identification of Controls (Continued) Insert the battery (Lithium battery) Button-type battery (Lithium battery) 1. Pinch the battery holder clip together then pull the tab to remove the battery holder. 2. Insert the battery with the + facing in the same direction as the + on the battery holder. 3. Replace the battery holder with battery into the Remote Control unit making sure that it is fully inserted. • Replace Remote Control unit battery with 3V micro lithium cells such as CR. 2025 or its e
Summary of the content on the page No. 11
Power Connection Follow steps 1 to 2 to connect. AC When disconnecting, reverse the order. Adapter Caution AC adapter • Do not connect the power plug to a power outlet other than • This AC adapter operates on 100-240V~ 2.2A 50-60Hz. that indicated on the label, as this can result in a risk of fire • MODEL NO. : DP-AC90 or electric shock. • Manufactured by WANLIDA GROUP Co., Ltd. • Do not connect or disconnect the power plug with wet • Contact an electrical parts distributor for assistance in se
Summary of the content on the page No. 12
Power Connection (Continued) This DVD player and its automotive adapter are designed for use in vehicles that have 12 volt, negative ground Automotive electrical systems. (This is standard for most vehicles.) If your vehicle has a different type of electrical system, the Adapter DC power system cannot be used. Cigarette lighter socket 2 Follow steps 1 to 2 to connect. 1 When disconnecting, reverse the order. Caution • Do not leave your DVD player in a place where the temperature exceeds 70°C (1
Summary of the content on the page No. 13
Power Connection (Continued) Battery Pack Notes • Do not detach the battery pack during playback. • Charge the battery pack before using it for the first time. • Be careful not to drop the battery pack. A Attaching the battery pack (supplied) A Detaching the battery pack 1. Match the hooks of the battery pack into the holes on the 1. Press the RELEASE knob. bottom of the player. 2. Pull the battery pack until the hooks click. 2. Press and slide the battery pack until the hooks click. 2 2 1 Hoo
Summary of the content on the page No. 14
Power Connection (Continued) Charging the battery pack Recharging and play times A A 1. Attach the battery pack to the player. Recharging Play time (DVD-VIDEO) 2. Connect the AC adapter to the player and then plug into an AC outlet. with player LCD On Approx. Approx. Player Battery Pack 2.5 hours 3 hours* * When Brightness control is set to minimum. - using the headphones. AC adapter cord insert - at room temperature (25°C) jack (DC IN 9.5V) Charge indicator Notes When charging starts, the charg
Summary of the content on the page No. 15
Audio/Video Connection The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. If this occurs, position the player away from the TV, VCR, or radio, or turn off the unit after removing the disc. DVD Player Connections Depending on your TV and other equipment there are various ways you can connect the player. Please refer to the manuals of your TV, stereo system or other devices as necessary for additional connection information. Video and Audio Connections to Your
Summary of the content on the page No. 16
Audio/Video Connection Audio Connection to Optional Equipment Amplifier equipped with 2-channel analog stereo or Dolby Pro Connect the DVD player to your optional equipment for audio Logic ll / Pro Logic: Connect the AUDIO OUT jacks on the DVD output. player to the audio left and right IN jacks on your amplifier, receiver, or stereo system, using the audio cables. Amplifier equipped with 2-channel digital stereo (PCM) or audio / video receiver equipped with a multi-channel decoder (Dolby Digi
Summary of the content on the page No. 17
PUSH C CL LO OS SE E P PU US SH H C CL LO OS SE E Rotate the LCD POWER A/V IN/OUT ENTER TITLE MENU DISPLAY LCD MODE OPEN SETUP COLOR/BRIGHT You can rotate LCD clockwise an angle of 180 degrees. After rotating LCD completely, you can fold the LCD However, if you turn it by force, it can cause serious screen as shown above. damage. 17 P PO OW WE ER R A A/V /V IN IN/O /OU UT T ENTER T TIT ITL LE E M ME EN NU U A AN NG GL LE E L LC CD D M MO OD DE E O OP PE EN N S SE ET TU UP P C CO OL LO OR R//B BR
Summary of the content on the page No. 18
Initial Setting By using the Setup menu, you can make various adjustments to LANGUAGE items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 18 LANGUAGE Menu Language English to 23. Original Disc Audio Disc Subtitle Off To display and exit the Menu: Disc Menu Original Press SETUP to display the menu. A second press of SETUP will take you back to initial screen. To go to the next level
Summary of the content on the page No. 19
Initial Setting (Continued) DISPLAY DISPLAY TV Aspect 4:3 Display Mode Letterbox Progressive Scan Off TV Output Select YPbPr Move Select Exit DVD TV Aspect 4:3: Select when a standard 4:3 TV is connected. 16:9: Select when a 16:9 wide TV is connected. DVD Display Mode Display Mode setting works only when the TV Aspect mode is set to “4:3”. LetterBox: Displays a wide picture with bands on the upper and lower portions of the screen. Panscan: Automatically displays the wide picture on the entire s
Summary of the content on the page No. 20
Initial Setting (Continued) AUDIO DVD Sample Freq. (Frequency) Each DVD disc has a variety of audio output options. Set the If your receiver or amplifier is NOT capable of handling 96 KHz player’s AUDIO options according to the type of audio system you signals, select 48 KHz. When this choice is made, this unit use. automatically converts any 96 KHz signals to 48 KHz so your system can decode them. AUDIO If your receiver or amplifier is capable of handling 96 KHz signals, Dolby Digital Bits
