Summary of the content on the page No. 1
DVD/CD RECEIVER
ПРИЕМНИК ДЛЯ ВОСПРОИЗВЕДЕНИЯ ДИСКОВ DVD И КОМПАКТ-ДИСКОВ
ПРИЙМАЧ З ПРОГРАВАЧЕМ DVD/CD-ДИСКІВ
KD-DV5308/KD-DV5307
For canceling the display demonstration, see page 5.
Информацию об отмене демонстрации функций дисплея см. на стр. 5.
Інформацію щодо відміни демонстрації функцій дисплею див. на стор. 5.
For installation and connections, refer to the separate manual.
Указания по установке и выполнению соединений приводятся в отдельной инструкции.
Вказівки по встановленню та виконан
Summary of the content on the page No. 2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical
Summary of the content on the page No. 3
WARNINGS: CONTENTS To prevent accidents and damage • DO NOT install any unit in locations where; INTRODUCTIONS – it may obstruct the steering wheel and gearshift lever operations. Playable disc type .................................... 4 – it may obstruct the operation of safety Preparation ............................................ 5 devices such as air bags. – it may obstruct visibility. OPERATIONS • DO NOT operate the unit while driving. • If you need to operate the unit while Basic
Summary of the content on the page No. 4
Playable disc type Disc type Recording format, file type, etc Playable 1 DVD DVD-Video (Region Code numbers include “5”) * DVD-Audio/DVD-ROM DVD Recordable/Rewritable DVD-Video 2 3 (DVD-R * /-RW, +R/+RW * ) DivX Video MPEG-1/MPEG-2 Video MP3/WMA/WAV JPEG/MPEG4 DVD-VR, +VR DVD-RAM All Dual Disc DVD side Non-DVD side 4 CD/VCD Audio CD (CD-DA)/DTS-CD * VCD (Video CD) CD-Text CD-ROM/CD-I (CD-I Ready) CD Recordable/Rewritable CD-DA (CD-R/-RW) DivX Video, VCD (Video CD) • Compliant to ISO 9660 level 1
Summary of the content on the page No. 5
Preparation Cancel the display demonstration and set the clock • See also page 27. When the power is turned off: Check the current clock time When the power is turned on: Change the display information ~ Turn on the power. Ÿ Enter the PSM settings. ! ] ⁄ Cancel the display demonstrations Select “DEMO,” then “DEMO OFF.” Set the clock Select “CLOCK H” (hour), then adjust the hour. Select “CLOCK M” (minute), then adjust the minute. Select “24H/12H,” then “24H” (hour) or “12H” (hour). @ Finish
Summary of the content on the page No. 6
Basic operations — Control panel • Turn on the power. • Activate/deactivate TA Standby Reception. • Turn off the power [Hold]. • Enter RDS programme search [Hold]. • Attenuate the sound (if the power is on). • DISC: Select title/folder. • IPOD/D.PLAYER: Enter the main menu/ Pause or stop playback/Confirm selection. • DAB: Select service. Volume control [Turn] Display window Change the display information. Eject disc. Loading slot • Adjust the sound mode. • FM/AM/DAB: Select preset station/ Deta
Summary of the content on the page No. 7
Display window Track information Playback mode/item indicators Loudness indicator indicators (Random/Repeat) Playback source Equalizer indicators Tuner reception indicators indicator Source display/Preset No./Track No./Folder Sound mode indicators No./Disc No./Chapter No./Channel No. RDS indicators Track indicator Main display (Time, menu, playback information) Basic operations — Remote controller (RM-RK241) Before using the remote controller: Installing the lithium coin battery • Aim the remo
Summary of the content on the page No. 8
EXTRA MONITOR Warning: 1 Monitor control buttons To prevent accidents and damage • Used for a JVC monitor—KV-MR9010 or • Do not install any battery other than CR2025 or KV-MH6510. its equivalent. • Do not leave the remote controller in a place DVD/RECEIVER (such as dashboards) exposed to direct sunlight 2 • Turns the power on if pressed briefly or for a long time; otherwise, it may explode. attenuates the sound when the power is on. • Store the battery in a place where children • Tur
Summary of the content on the page No. 9
For DAB tuner operations: How to select a number • 5 / ∞ : Changes the preset services. • 4 / ¢ : – Changes the service if pressed briefly. – Searches for ensembles if pressed and held. For Apple iPod/JVC D. player operations: An input screen appears... • ∞ : Pauses/stops or resumes playback. 5 : Enters the main menu. (Now 5/∞/4 / ¢ work as the 3 menu selecting buttons.) * • 4 / ¢ (in menu selecting mode): – Selects an item if pressed briefly. (Then, press ∞ to confirm the se
Summary of the content on the page No. 10
Listening to the radio Change the display information (for non-RDS station) Select preset station. Lights up when receiving an FM stereo ~ Select “FM/AM.” broadcast with sufficient signal strength. Ÿ Select the bands. ! Search for a station to listen—Auto Search. Note: Manual Search: Hold either one of the buttons until “M” FM1 and FM2: 87.5 MHz – 108.0 MHz flashes on the display, then press it repeatedly. FM3: 65.00 MHz – 74.00 MHz When an FM stereo broadcast is 3 hard to receive 1 Loca
Summary of the content on the page No. 11
Searching for FM RDS programme — PTY Search Change the display information ~ Activate PTY Search. Ÿ Select one of the PTY codes (programme types). See the following for details. ! Start searching. If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in. Preset PTY codes in the number buttons (1 to 6): Storing your favorite programme types You can store your favorite PTY codes into the number buttons. PTY codes (available with the
Summary of the content on the page No. 12
Activating/deactivating TA/PTY Standby Reception TA Standby Reception Indicator PTY Standby Reception Indicator See page 27. Press to activate. The unit temporarily will switch to Traffic Lights up The unit temporarily will switch to your Lights up Announcement (TA), if available, from any favorite PTY programme from any source source other than AM and FM3. other than AM and FM3. The volume changes to the preset TA volume level if the current level is lower than the preset level (see page 2
Summary of the content on the page No. 13
Disc operations Before performing any operations... Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other discs by referring to the monitor screen. (See pages 17 – 20.) The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program). If the current disc does not have any disc menu, all tracks will be played repeatedly until you change the source or eject the di
Summary of the content on the page No. 14
Operations using the control panel Pressing (or holding) the following buttons allows you to... Disc type 3 (Number buttons) * Press: Select chapter Select title During stop: Locate title Hold: Reverse/fast-forward During play/pause: Locate 1 chapter * chapter Press: Select track Select folder Locate particular folder directly 2 Hold: Reverse/fast-forward track * Press: Select track Locate particular track directly — 1 Hold: Reverse/fast-forward track * (PBC not in use) Press: Select track S
Summary of the content on the page No. 15
Operations using the remote controller—RM-RK241 : Stop play : Pause (Frame by frame playback if pressed during pause.) : Start play 1 : Reverse/forward chapter search * 2 • Slow motion * during pause. No sound can be heard. : Press: Select chapter (during play or pause) 3 Hold: Reverse/fast-forward chapter search * : Select title : Select audio language : Select subtitle language : Select view angle To search for chapter/title directly Using menu driven features... 1 Select chapt
Summary of the content on the page No. 16
: Stop play : Pause (Frame by frame playback if pressed during pause.) Canceling the PBC playback... : Start play 1 1 : Reverse/forward track search * 2 2 + • Forward slow motion * during pause. No sound can be heard. 3 Enter the desired number. (Reverse slow motion does not + work.) 4 : Press: Select track • To resume PBC, press / . Hold: Reverse/fast-forward track 3 search * : Select audio channel (ST: stereo, L: left, R: Right) : Stop play To search for track (within
Summary of the content on the page No. 17
Enlarging the view—Zoom in (DVD/DivX/MPEG Video/VCD) During moving picture playback... 1 While holding , press repeatedly. 2 Move the enlarged portion. • To cancel zoom, select “ZOOM OFF.” Operations using the on-screen bar (DVD/DivX/MPEG Video/VCD) These operations are possible on the monitor using the remote controller. ~ Show the on-screen bar (see page 18). (twice) Ÿ Select an item. ! Make a selection. If pop-up menu appears... • To cancel pop-up menu, press . • For entering time/numb
Summary of the content on the page No. 18
On-screen bar Ex.: DVD-Video Information Operation 1 Disc type 6 Playback status 2 • DVD-Video/DTS-CD: Audio signal format type Play and channel Forward/reverse search Forward/reverse slow-motion • VCD: PBC 1 3 Playback mode * Pause DVD-Video: T. RPT: Title repeat Stop C. RPT: Chapter repeat 7 Operation icons DivX/MPEG Video: T. RPT: Track repeat Change time indication (see 5) Time Search (Enter the elapsed playing F. RPT: Folder repeat 2 VCD * : T. RPT: Track repeat time of
Summary of the content on the page No. 19
Operations using the control screen (DivX/MPEG Video/MP3/WMA/WAV/CD) These operations are possible on the monitor using the remote controller. ~ Show the control screen. DivX/MPEG Video: Press during play. MP3/WMA/WAV/CD: Automatically appear during play. Ÿ Select “Folder” column or “Track” column (except for CD). ! Select a folder or track. ⁄ Start playback. DivX/MPEG Video: Press . MP3/WMA/WAV/CD: Playback starts automatically. Control screen To select a playback mode 1 While control sc
Summary of the content on the page No. 20
Mode Playback functions F. RPT (folder repeat): Repeat current folder T. RPT (track repeat): Repeat current track F. INT (folder intro): Plays the beginning 15 seconds of first tracks of all folders of the current disc T. INT (track intro): Plays the beginning 15 seconds of all tracks of the current disc D. RND (disc random): Randomly play all tracks F. RND (folder random): Randomly play all tracks of current folder, then tracks of next folders Operations using the list screen (DivX/MPEG Video/M
