Summary of the content on the page No. 1
OWNER’S
MANUAL
DVD PLAYER with VIDEO CASSETTE RECORDER
EWD2202
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
EMERSON AND THE G-CLEF LOGO ARE REGISTERED
TRADEMARKS OF EMERSON RADIO CORP., PARSIPPANY,
NEW JERSEY, U.S.A.
If you need additional assistance for set-up or operating
after reading owner’s manual, please call
TOLL FREE : 1-800-256-2487
Please read before using this equipment.
Summary of the content on the page No. 2
: WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, CAUTION within an equilateral triangle, is intended to RISK OF ELECTRIC SHOCK alert the user to the presence of uninsulated DO NOT OPEN “dangerous voltage” within the product’s : enclosure that may be of sufficient magnitude CAUTION to constitute a risk of electric shock to persons. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK
Summary of the content on the page No. 3
IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instruc- proper grounding of the mast and supporting structure, tions should be read before the appliance is operated. grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-dis- 2. Retain Instructions- The safety and operating instructions charge unit, connection to grounding electrodes, and should be retained for future reference. requirements for the grounding electr
Summary of the content on the page No. 4
A NOTE ABOUT RECYCLING This product’s packaging materials are recyclable and can be reused. Please dispose of all materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. The serial number of this product may be found on the back of the DVD/VCR player. This serial number is unique to your machine. You should record the number and other vital information
Summary of the content on the page No. 5
TABLE OF CONTENTS LASER SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . 3 PLAYING A DVD VIDEO OR AN AUDIO CD . . . . . . . . . . 23 ABOUT COPYRIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 USING THE DVD MENUS . . . . . . . . . . . . . . . . . . . . . . . . . 23 SUPPLIED ACCESSORIES . . . . .
Summary of the content on the page No. 6
FEATURES DVD Mode ¡Dolby Digital sound ¡On-screen display This player can handle Dolby Digital surround sound Information about the current operation can be displayed with 5.1 channels when connected to a Dolby Digital on the TV screen, allowing you to confirm the currently decoder. active functions (such as program playback), on the TV screen using the remote control. ¡Still/fast/slow/step playback Various playback modes are available including still pic- ¡DTS (Digital Theater System) tures,
Summary of the content on the page No. 7
Playback Mode VCR ¡S-VHS Quasi Playback (SQPB) Hardware specifications (Allows you to view a tape recorded in S-VHS format.) ¡Auto Head Cleaner ¡Auto Repeat ¡4 Head HiFi Stereo ¡2 Step Picture Search Operation ¡Bilingual on-screen menu display selectable in ¡Index Search English, French, or Spanish ¡Time Search ¡181 channel capability PLL frequency synthesiz- er tuner with direct station call Recording (A cable converter box may be necessary to view scram- ¡1 Year, 7 events (including Daily an
Summary of the content on the page No. 8
ABOUT THE DISCS PLAYABLE DISCS DISC TYPES [ ] The following discs can be played back on this DVD DVD/VCR. Data on a DVD is divided into sections called "titles", and then into subsections called "chapters", each of which is Maximum Disc Type Logo Contents Disc Size given a title or chapter number. Playback conditions are Playback Time preset on some DVD video discs, and these playback con- Approx. 4 h (single-sided) ditions take priority over user operations on this player. If 12 cm Approx. 8
Summary of the content on the page No. 9
OPERATING CONTROLS AND FUNCTIONS FRONT PANEL 1 2 345 6 798 POWER VIDEO CHANNEL DVD OPERATION VCR OPERATION TIMER L SET AUDIO VCR/TV R CST.IN OPEN/CLOSE STOP SKIP/REV PLAY FWD/SKIP STOP/EJECT REW PLAY F.FWD REC/OTR OUTPUT 25 23 21 19 17 15 13 11 26 24 22 20 18 16 14 12 10 REMOTE CONTROL tape in the DVD/VCR. It flashes when all timer recordings or One-Touch Recordings are finished. 56 27 POWER SPEED AUDIO 7. POWER Button [page 17] 28 Press to turn the power on and off. 8. POWER Light 12 3 55 SKIP
Summary of the content on the page No. 10
example: setting clock or timer program). Press to Button on the front panel first, you need to re- add or delete channel numbers during channel preset. select the corresponding mode by pressing the 19. STOP/EJECT Button (VCR) [page 21] DVD or the VCR button on the remote control. EJECT Button 32. h Button Press to remove the tape from the VCR. DVD mode STOP Button Press to view the DVD picture in fast reverse Press to stop the tape motion. Press to enter digits motion or to reverse play
Summary of the content on the page No. 11
48. ENTER Button 51. VCR Button [page 13] Press to accept a setting. Press to select VCR mode for the remote control. 49. g Button You can switch the OUTPUT mode either by DVD mode pressing the OUTPUT Button on the front panel, or Press to fast forward the Disc. Press the Pause but- by pressing the DVD or the VCR Button on the ton, then press the FWD button to begin slow remote control. However, if you press the OUTPUT motion playback. Press the FWD button repeated- Button on the front pane
Summary of the content on the page No. 12
and to the component Video In jacks of a televi- source (laser disc player, video disc player, etc.) sion. here. 61. COAXIAL Jack 65. CH3/CH4 Switch Connect an optional coaxial digital audio cable Set to channel 3 or 4 to use your TV with your here and to the Coaxial Digital Audio In jack of a DVD/VCR. decoder or audio receiver. 66. ANT-IN (Antenna In) Jack 62. S-VIDEO OUT Jack Connect your antenna, Cable Box, or Direct Connect an optional S-Video cable here and to Broadcast System. the S-Video
Summary of the content on the page No. 13
VCR/DVD SWITCHING Since this product comprises VCR and DVD players, it is necessary to switch one from the other. SWITCHING TO VCR MODE SWITCHING TO DVD MODE Press the VCR button on the remote control. Press the DVD button on the remote control. (Verify that the VCR OUTPUT Light is lit.) (Verify that the DVD OUTPUT Light is lit.) OR OR Press the OUTPUT button on the front panel, and then Press the OUTPUT button on the front panel, and then press the VCR Button on the remote control. press t
Summary of the content on the page No. 14
IN OUT HOOKUPS SETTING THE CH3/CH4 DVD/VCR TO TV CONNECTION SWITCH 1. Disconnect the AC power cord of the TV from the If your TV does not have A/V terminals: AC outlet. When the DVD/VCR is in the VCR Playback mode or 2. Disconnect the antenna or cable from the TV. when the DVD/VCR is in the VCR mode, your TV will 3. Connect the antenna or cable to the ANT-IN jack of receive signals from the DVD/VCR on either channel the DVD/VCR. 3 or channel 4. To use the DVD/VCR with your TV, set 4. Connect th
Summary of the content on the page No. 15
FOR TVs WITH COMPONENT VIDEO IN JACKS Use a component video cable (commercially available) in place of the yellow video cable to enjoy higher qual- ity pictures. The component video connection only supplies video (picture) in the DVD mode of the DVD/VCR. Therefore, in order to use the VCR features or view TV channels at the DVD/VCR, you still need to either connect the RF coax- ial cable between the ANT-OUT jack of the DVD/VCR and the TV’s Antenna In jack, or connect the yellow video cable as d
Summary of the content on the page No. 16
CONNECTING TO A DOLBY DIGITAL DECODER OR DTS DECODER If using this DVD/VCR to play a DVD disc in 5.1 channel Dolby Digital surround, or DTS surround formats, the DVD/VCR outputs a Dolby Digital, or DTS data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the DVD/VCR up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound of a professional standard such as can be heard in movie theaters. Use an audio coaxia
Summary of the content on the page No. 17
SETUP AUTOMATIC CHANNEL SET UP VCR 5 Begin channel preset by pressing the F.FWD The DVD/VCR can automatically program the tuner to button once. The tuner scans and memorizes scan only the channels which are available in your area. all active channels in your CH 01 ¡Channel memory programming is NOT needed area. AUTO SET UP when the DVD/VCR is connected to a cable box or ¡The DVD/VCR distinguishes a satellite box as in "DVD/VCR TO TV CONNEC- between standard TV channels TION" on page 14. In this
Summary of the content on the page No. 18
TO ADD/DELETE CHANNELS CLOCK SET UP When scanning, some channels may be skipped due to VCR a weak signal. In such cases, you can add the channels to the DVD/VCR memory manually. Set the clock accurately for proper automatic timer recording. We suggest that you use a TV or radio sta- 1 Press the MENU button until the main menu tion as your time source. appears. (If you have already set the clock, you only have to press it once. If not you 1 Press the MENU button twice to call up the have to
Summary of the content on the page No. 19
PLAYBACK FUNCTION NORMAL PLAYBACK 2 Select "AUTO REPEAT" by pressing the PLAY or the STOP button. VCR 3 Begin auto repeat playback by pressing the 1 Insert a prerecorded tape. The DVD/VCR will F.FWD button so that [ON] appears next to turn on, and the VCR/TV Light "AUTO REPEAT". and the CST IN Light comes ¡If the on-screen menu still remains, press the on. CLEAR/C.RESET button to exit the menu. ¡If the safety tab has been removed, the DVD/VCR ¡To cancel the Auto repeat mode, press the F.FW
Summary of the content on the page No. 20
