Summary of the content on the page No. 1
H EA D P H O N ES
VOD705
VOD916
DVD PLAYER
WITH
DROP-DOWN
AUTO FM
CHANNEL SOURCE ON OFF AUTO VOLUME SELECT
PROG
AP S
VIDEO
TV/MONITOR
®
ELECTRONICS CORP .
128-6747
128-6747
DATE : 21/05/03
1 of 31
I N P U T
VD I E O AUD I O
IR R
L
Summary of the content on the page No. 2
Important Notice It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a screen that is located in the motor vehicle at any point forward of the back of the driver’s seat, or that is visible, directly or indirectly, to the driver while operating the vehicle. In the interest of safety, the VOD916 should never be installed where it will be visible, directly or indirectly, by the operator of the motor vehicle. Warnings Do not use any solvents or cleaning
Summary of the content on the page No. 3
Features · 9 Inch TFT (Thin Film Transistor) Active Matrix Congratulations on your purchase of the Audiovox VOD916 DVD Player with Drop-Down Video TV/ LCD (Liquid Crystal Display) Monitor Monitor. The VOD916 has been designed to give you · OSD (On Screen Display) for Control of Picture and your family many years of video entertainment in the mobile environment. Please read the directions Quality and Functions that follow to familiarize yourself with the product and to ensure that you obtain th
Summary of the content on the page No. 4
H E A D P H O N E S Controls and Indicators Diagram 1 POWER PLAY 2 4 EJECT STOP 3 5 1 6 7 8 8 9 23 10 AUTO FM ON OFF AUTO PROG CHANNEL SOURCE VOLUME SELECT AP S 21 11 12 19 13 18 14 15 17 16 -4- 128-6747 4 of 31 I N P U T V I DEO IR AUD IO L R
Summary of the content on the page No. 5
Main Function Descriptions 1. DVD Disc insertion slot – For loading Disc. 12. CHANNEL( )Button – Use this button to increase the channel number to the desired number. Note : When TV 2. POWER Button – Bright red when system is on dim when function is selected. off. 13. Auxiliary Audio Right Input. 3. EJECT ( ) Button – For ejecting discs from the disc compartment. 14. Auxiliary Audio Left Input. 4. PLAY ( ) Button – This button is used to enter the play 15. Auxiliary Video Input. mode. 1
Summary of the content on the page No. 6
21. FM Select Button – Each time this button is pressed will switched FMM cycles through (FM OFF – POD AUDIO – SAT AUDIO) and the frequency of the channel of modulator will remain same. 22. VOLUME ( ) Button – Use this button to decrease the volume level of the headphone jacks. It is also used to make picture adjustments in picture select mode. Note:These buttons will not affect the volume of wireless headphones or the wired RF modulator. When using these devices the volume must be adjusted
Summary of the content on the page No. 7
Remote Control Operation POWER EJECT 1 32 SOURCE 2 AUTO 31 MEMORY 3 SKIP/ SEARCH 4 Battery Installation ERASE/ WRITE – VOL + 5 30 6 CH 29 Before attempting to operate your Remote Control, MUTE PIX 7 28 install the batteries as described below. 8 27 1) Turn the Remote Control face down. Using a 9 Enter MENU SETUP fingernail, lift the battery cover off. 10 26 25 2) Install two “AAA” batteries as shown. Make RETURN REPEAT 11 CH 24 sure that proper polarity (+ or -) is observed. 23 21 3) Align th
Summary of the content on the page No. 8
DVD Function Descriptions *Function control is available on the unit and the remote control. 1. POWER Button* Press this button to turn the VOD916 on. Press the button again to turn the VOD916 off. 2. SOURCE Button* Video signals from video equipment connected to the audio / video inputs can be displayed on the monitor by pressing this button. Each time the button is pressed, the audio / video source will change the sources: DVD, TV, AV1 and AUX. 3. AUTO MEMORY Button (AUTO PROGRAM Button)*
Summary of the content on the page No. 9
6. Channel Up ( ) Button* Use this button to increase the channel number to the desired channel and to scroll upward in menu options. 7. MUTE Button Press this button to mute the audio. Pressing the button again restores sound to the previously set level. 8. ENTER Button Used to implement setting selected. 9. LEFT ( ) Button Allows the user to shift left in the menu options. 10. MENU Button Allows the user to access the main menu. 11. RETURN Button Allows the user to return to the menu
Summary of the content on the page No. 10
13. DISPLAY Button Press to display DVD Disc current information. Press DISPLAY button DVD Player Perform Once Display current TITLE & CHAPTER Twice Display current SUBTITLE 3 times Display current AUDIO language & channel 4 times Display current ANGLE 5 times Display A-B current status 6 times Display REPEAT current status 7 times Display is turn off For Title & Chapter, use cursor buttons to do title/chapter selection, then press Enter button to impl
Summary of the content on the page No. 11
17. REV ( ) Button Allows the user to search in a backward direction at 2,4, 6 and 8 times the normal speed. 18. FWD ( ) Button Allows the user to search in a forward direction at 2,4, 6 and 8 times the normal speed. 19. PLAY ( )Button* Press this button to activate the play mode while a disc is loaded into the disc compartment. 20. STOP (n) Button* DVD disc play will be stopped. 21. DVD Mode Select button Switches certain function keys on the remote control for DVD functions. 22. VCP Mo
Summary of the content on the page No. 12
26. SETUP Button Allows the user to select the DVD player’s options (Display, OSD Language, Defaults, Parental Control, Password, Exit Setup). 27. RIGHT ( ) Button Allows the user to shift to the right in the menu options. 28. PIX Button (PICTURE SELECT) Each time this button is pressed, the on screen picture adjustment display the “adjustment bars” for BRIGHTNESS, CONTRAST, COLOR or TINT. Once the desired adjustment bar is displayed, use the VOLUME UP/DOWN buttons to adjust the setting.
Summary of the content on the page No. 13
32. EJECT ( )Button* The disc will be ejected from disc compartment. 33. FM TRANSMITTER ON/OFF Button Turns FM Modulator power on/off. 34. SOURCE SELECT Button* With FM ON, used to selects the POD Audio (DVD and POD audio) or SAT Audio (Second IR input). With FM OFF, used to select SAT Audio or Car Audio. 35. CHANNEL SELECT Button Selects the FM modulator Frequency (Frequency 1, 88.3MHz, Frequency 2, 88.7MHz, Frequency 3, 89.1M
Summary of the content on the page No. 14
HEADPH ONES Turning the VOD916 On or Off 1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The internal friction will hold the screen in position while the system is in use. 2. Pressing the power button on the unit or the remote control will turn the system on or off alternately. When in use the internal backlighting will illuminate the controls. 3. After the unit h
Summary of the content on the page No. 15
HEADPHONE S Remote Sensor Remote Sensor The VOD916 incorporates two Infrared sensors which relay signals Eye from the remote control to allow the unit to be controlled simply by pointing its remote control at the remote sensor eye. The repeater function allows control of auxiliary equipment such as an Audiovox Video Cassette Player. The infrared sensor can relay signals from AUTO FM PROG CHANNEL SOURCE ON OFF AUTO VOLUME SELECT most manufacturer’s remote controls to its respective component
Summary of the content on the page No. 16
Wired Headphones There are two 1/8” headphone jacks on the VOD916 that can be used with any standard wired stereo headphones. These jacks are controlled by the volume up / down buttons on the VOD916 remote control. Wired FM Modulator The VOD916 is equipped with an RF modulator, that allows you to listen to the VOD916 audio signal by tuning your vehicle’s radio to the selected frequency, (88.3, 88.7, 89.1, 89.5, 89.9, 90.3MHz). This feature is accessed by using either the FM transmitter buttons
Summary of the content on the page No. 17
DVD Basics To get the optimum use out of the DVD section, make sure you read this section completely. Regional Coding Both the DVD player and disc are coded by region. These regional codes must match in order for the disc to play. If the codes don’t match, the disc won’t play. This unit’s code is region 1. Other regional codes cannot be played in this unit. The unit will display “WRONG REGION.” Types of Discs your DVD will play • DVD discs – DVD discs which contain video. • Audio discs – Aud
Summary of the content on the page No. 18
Settings and Adjustments This chapter describes how to set and how to adjust using the on-screen SETUP menu. Using the Setup Menu Using the setup display, you can do the initial setup, adjust the picture quality, and set the various outputs. You can also set a language for the on-screen display and the setup display and limit playback by children. 1) Press the SETUP button to display the “setup menu” on the display screen. 2) Select the main item you want using the cursor (ts) buttons, and
Summary of the content on the page No. 19
Settings for Display Press the SETUP button and select Display. The DISPLAY SETUP allows you to adjust screen setting (aspect ratio) Press and then use the (ts)buttons to select the appropriate settings. 4:3 / PS This displays the wide picture on the screen with a portion of the left & right side removed. 4:3 / LB This displays the wide picture with black bands on the upper and lower portions of the screen. 16:9 This displays a picture with black bands on the upper and lower portion of the sc
Summary of the content on the page No. 20
Settings for Parental (Parental Control) This section of the SETUP Menu allows user to control the content of movie playback from G to Adult. The Parental Control function allows you to limit viewing to your preference. 1. Use the ts buttons to select from: G (Children) PG PG 13 R NC-17 ADULT (Adult) Note:The lower the value, the more strict the limitation. Press the Enter button to confirm the selection. 2. Input a password in 4 digits using the numeric buttons then press the Enter button
