Summary of the content on the page No. 1
DVD-P390 DVD-P390
DVD Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your
product at
www.samsung.com/global/register
AK68-01770G
Summary of the content on the page No. 2
getting started Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety p
Summary of the content on the page No. 3
● GETTING STARTED Precautions RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that This symbol indicates that there are dangerous voltage consisting a risk important operating and maintenance of electric shock is present within instructions in the literature this unit. accompanying this unit. Do not install this equipment in a confined space such as a bookcase or similar unit. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTUR
Summary of the content on the page No. 4
getting started CAUTION THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. Note: • This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere. • This DVD player is designed and manufactured to respond to the Region Management Information. If the Regio
Summary of the content on the page No. 5
● GETTING STARTED Before you start Accessories Video/Audio Batteries for Remote Remote Control User’s Manual Cable Control (AAA Size) (AC39-22017Z/AC- (AK59-00103F) (AK68-01770G) (AC43-12002H) 39-42001U) Install Batteries in the Remote control 1 Open the battery cover on the back of the remote control. 2 Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly. 3 Replace the battery cover. If the remote control doesn’t operate properly: - Check th
Summary of the content on the page No. 6
getting started 3 Precaution GETTING STARTED 4 Caution 5 Before You Start 3 7 General Feature 8 Disc Type and Characteristic 9 Descriptions 10 Rear Panel 11 Tour Of Remote Control 12 Choosing Connections CONNECTIONS 12 Connecting to a TV (Progressive) 13 Connecting to a TV (Interlace) 12 14 Connecting to a TV (Video) 15 Connecting to an Audio System (2 Channel Amplifi er) 16 Connecting to an Audio System (Dolby Digital, MPEG2 or DTS Amplifi er) 17 Playing a Disc BASIC FUNCTIONS 19 Using the
Summary of the content on the page No. 7
● GETTING STARTED Note General Features - Discs which cannot be played with this Excellent Sound player. Dolby Digital, a technology developed by Dolby Laboratories, provides crystal clear sound • DVD-ROM • DVD-RAM reproduction. • CD-ROM • CDV Screen • CDI • CVD Both regular and widescreen(16:9) pictures can be • CDGs play audio only, not graphics. viewed. VCD can't be played on this player. Slow Motion - Ability to play back may depend on recording An important scene can be v
Summary of the content on the page No. 8
getting started Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) Recording Types Disc Size Max. Playing Time Characteristics Single-sided 240 min. - DVD contains excellent sound DVD 12 Cm and video due to Dolby Digital Double -sided 480 min. Audio and MPEG-2 system. + - Various screen and audio functions Single-sided 80 min. Video 8 Cm can be easily selected through the Double -s
Summary of the content on the page No. 9
● GETTING STARTED Description Front Panel Controls 5 2 4 1 3 6 4. DISPLAY 1. STANDBY/ON ( ) Operation indicators are displayed here. Turn on/off and the player is turned on/off. 5. OPEN/CLOSE ( ) / STOP ( ■) 2. DISC TRAY Press to open and close the disc tray. And stops Place the disc here. disc play. 3. USB Host 6. PLAY/PAUSE ( ) Connect digital still camera, MP3 player, memory Begin or pause disc play. stick, Card reader, or other removable storage devices. Front Panel Display Di
Summary of the content on the page No. 10
getting started Rear Panel 1 2 3 1. AUDIO OUT JACKS - If P-SCAN (480p) is set to “ON” in Video Output of the Setup Menu, progressive scan Use audio cables to connect to the Audio input mode will work. jacks of your television or audio/video receiver - If I-SCAN (480i) is set to “ON” in Video Output 2. VIDEO OUT JACK of the Setup Menu, interlaced scan mode will - Use a video cable to connect to the Video input work. jack on your television. 4. DIGITAL AUDIO OUT JACKS 3. COMPONENT VIDEO OUT
Summary of the content on the page No. 11
● GETTING STARTED Tour of the Remote Control 1. DVD POWER Button Turns the power on or off. 2. REPEAT Button Allows you to repeat play a title, chapter, track, or 12 1 disc. 2 13 3. DISC MENU Button Brings up the Disc menu. 14 3 15 4. BOOKMARK 4 Quickly find bookmark sections of a DVD. 5 6 16 5. SEARCH Buttons ( ) / Allow you to search forward/backward through a 7 disc. 17 6. STOP Button ( ) 8 18 7. SKIP Buttons ( ) / 9 Use to skip the title, chapter or track 10 8. MENU Butto
Summary of the content on the page No. 12
connections Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Before Connecting the DVD Player - Always turn off the DVD player, TV, and other devices before you connect or disconnect any cables. - Refer to the user’s manual of the additional devices (such as a TV) you are connecting formore information on those particular devices. Connecting to a TV (Progressive) - Connecting to your TV using Component vid
Summary of the content on the page No. 13
● CONNECTIONS Connecting to a TV (Interlace) - Connecting to your TV using Component video cables. - You will enjoy excelllent quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(P ), red(P ) signals to present clear B R and clean images. (Audio signals are delivered through the audio output.) 1 Using Component video cables, connect the COMPONENT VIDEO OUT jacks on the rear of the DVD player to the COMPONENT IN jacks o
Summary of the content on the page No. 14
connections Connecting to a TV (Video) 1 Using Video/Audio cables, connect the VIDEO (yellow)/ AUDIO (red and white) OUT jacks on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN jacks of your TV. WHITE 2 Turn on your DVD player and TV. RED YELLOW Video Audio Cable Cable RED WHITE YELLOW 3 Press the input selector button on your TV remote control until the Video signal from the DVD player appears on the TV screen. Note - Noise may be generated if the audio cable pl
Summary of the content on the page No. 15
● CONNECTIONS Connecting to an Audio System (2 Channel Amplifier) 1 Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD player to the AUDIO (red and white) IN jacks of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO , WHITE COMPONENT jacks on the rear of the DVD player to the VIDEO, COMPONENT jacks of your TV as described on pages 12 to 14. RED 3 Turn on your DVD player, TV, and Amplifier. Audio Cable RED WHITE 4 Press the input s
Summary of the content on the page No. 16
connections Connecting to an Audio System (Dolby Digital, MPEG2 or DTS Amplifier) 1 If using a Coaxial cable, connect the DIGITAL AUDIO OUT (COAXIAL) jack on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) jack of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO, COMPONENT jacks on the rear of the DVD player to the VIDEO, COMPONENT jacks of your TV as described on pages 12 to 14. Coaxial Cable 3 Turn on your DVD player, TV, and Amplifier. 4 Press the input s
Summary of the content on the page No. 17
● BASIC FUNCTIONS ▼ basic functions Playing a Disc Before Play - Turn on your TV and set it to the Video Input your DVD player is connected to with your TV’s remote control. - If you connected the DVD player to an external Audio System, turn on your Audio System and set it to the correct Audio Input. After plugging in the player, the first time you press the DVD POWER button, the screen to the right appears: If you want to select a language, press a π/† button, and then press English ENTER.
Summary of the content on the page No. 18
▼ ▼ ▼ basic functions Note 4 - If the player is left in the stop mode for more Stopping Play than one minute without pressing any buttons, Press the STOP ( ) a screen saver will be activated. Press the button during PLAY/PAUSE ( ) button to resume normal play. play. - If the player is left in the stop mode for more than 30 minutes, the power will automatically turn off. 5 Removing the Disc Press the OPEN/CLOSE ( ) button. Screen stops, no sound. 6 To resume, press the PLAY/PAUSE ( )
Summary of the content on the page No. 19
● BASIC FUNCTIONS ▼ Using the Search and Skip Functions During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection. Searching through a Chapter or Track If you want to search at a faster speed on the DVD or CD, press and hold the button. During play, press the SEARCH ( or ) button on the remote control for DVD 2X, 4X, 64X, 128X more than 1 second. CD 2X, 4X, 8X Note - The speed marked in this function may be different from
Summary of the content on the page No. 20
▼ basic functions Using the Display Function When Playing a DVD/MPEG4 You can select Info in the function menu by pressing the INFO button. 1 During play, press the INFO button on the remote control. DVD 2 Press the π/† buttons to Enter Bookmark select the desired item. Shortcut MPEG4 Enter Shortcut 3 Press the √/® buttons to make the desired setup and then press the ENTER button. 4 To make the screen disappear, press the CANCEL button. 20_ basic functions
