Audiovox AS-RS user manual

Summary of the content on the page No. 1

INSTALLATION MANUAL
FOR
Reverse Scanning System
AS-RS
Printed In USA 128-7073A
The Model AS-RS (Reverse Scanning System) reads ultrasonic signals that are projected from sensors mounted in your vehicle’s
rear bumper. As the signals “Echo” off of objects in the detection field, the control unit’s microprocessor translates them into
audible warning tones, or sounds, inside the vehicle which alert the driver. (An option

Summary of the content on the page No. 2

Summary of the content on the page No. 3

4. Determine where the sensor wires will enter into the trunk area or passenger compartment. Many vehicles have a factory grommet to allow routing of wires from the outside to the inside of the vehicle. If you are drilling a hole through a metal body panel to route your sensor wires into the trunk/cargo area, be sure to coat the holes edges with Zinc Galvanizer. 5. Feed the sensor wires through the factory grommet or other opening into the vehicle for connection to the control module (e.g., in

Summary of the content on the page No. 4

Summary of the content on the page No. 5

Summary of the content on the page No. 6

Summary of the content on the page No. 7

Summary of the content on the page No. 8

© 2005 Audiovox Electronics Corp., Hauppauge, NY 11788 Printed in USA 128-7073A