Summary of the content on the page No. 1
PORTABLE DUST COLLECTOR
MODEL G1163
INSTRUCTION MANUAL
COPYRIGHT © 1994 BY GRIZZLY INDUSTRIAL, INC. REG # TX 4 039 729
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
REVISED FEBRUARY, 1999. PRINTED IN U.S.A.
Summary of the content on the page No. 2
Summary of the content on the page No. 3
TABLE OF CONTENTS PAGE 1. SAFETY · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2 SAFETY INSTRUCTIONS FOR POWER TOOLS · · · · · · · · · · · · · · · · · · · · · · · · · · 2 ADDITIONAL SAFETY INSTRUCTIONS FOR THE DUST COLLECTOR · · · · · · · · 4 2. GENERAL INFORMATION· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5 UNPACKING · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Summary of the content on the page No. 4
Summary of the content on the page No. 5
Safety Instructions For Power Tools 9. USE PROPER EXTENSION CORD. Make 14. MAINTAIN TOOLS WITH CARE. Keep sure your extension cord is in good condi- tools sharp and clean for best and safest tion. When using an extension cord, be performance. Follow instructions for lubri- sure it is rated Hard Service (grade S) or cating and changing accessories. better. Conductor size must be 16 A.W.G. for cords up to 100 feet in length. An under- 15. DISCONNECT TOOLS before servicing sized cord will cause a d
Summary of the content on the page No. 6
Additional Safety Instructions For The Dust Collector 4. Suspended dust particles in conjunction with 1. This dust collector is to be used for wood an ignition source, may cause an explosion. dust collection only. DO NOT use this dust DO NOT operate the dust collector in areas collector to pick up liquids and metal scrap where explosion risks would be high if dust including, but not limited to, nails and filings. were dispersed into the area. Areas of high Metallic debris will contact the spinni
Summary of the content on the page No. 7
SECTION 2: GENERAL INFORMATION Grizzly Industrial, Inc. is proud to introduce the To operate this, or any power tool, safely and effi- Model G1163 Portable Dust Collector. This dust ciently, it is essential to become as familiar with collector is a part of Grizzly’s growing family of its characteristics as possible. Take as much time fine machinery. When used according to the as necessary to become acquainted with the guidelines described in this manual, you can Model G1163. The time you invest
Summary of the content on the page No. 8
Unpacking Piece Inventory The Model G1163 Dust Collector is shipped from With all the parts removed from the container, the manufacturer in a carefully packed carton. If you should have: you discover the machine is damaged after •Collector Body and Fan/Motor Assembly you’ve signed for delivery, please call Customer •Base Service immediately for advice. •Handle Bar •Casters Save the containers and all packing materials for •Collection Bag possible inspection by the carrier or its agent. •Hose Cla
Summary of the content on the page No. 9
Summary of the content on the page No. 10
Summary of the content on the page No. 11
Handle Bar Collector Body/ Motor Assembly Align the handle bar mounting holes on the bar and the base. Tighten with the four (4) flat head screws provided. See Figure 3. Position the motor mounting holes over the holes on the raised platform on the base. Secure the motor with the four (4) bolts provided. See Figure 4. Figure 3. Handle bar attached to the base plate. Figure 4. Motor/collector body mounted on base. G1163 Portable Dust Collector - 9 -
Summary of the content on the page No. 12
Summary of the content on the page No. 13
SECTION 4: OPERATIONS Test Run Set Up Please review the safety rules if you are not sure The G1163 dust collector can be either operated about the risks associated with operating this as a mobile or stationary unit. There are advan- machine. Turn on the power supply at the main tages and disadvantages to both systems. The panel if not already on. Press the ON switch and primary advantage of a mobile system is low expense of ducts and fittings. On the other hand be ready to switch OFF just in cas
Summary of the content on the page No. 14
Mobile Stationary For mobility, the G1163 is mounted on casters The G1163 can be set up as a stationary unit, and can be moved within close proximity to your however keep in mind it can only service one woodworking machines. You will need a flexible machine at a time. The primary advantage of a duct to connect each machine with a collection stationary system is it eliminates the process of hood. If you wish to specifically direct air flow disconnecting and moving the dust collector, while the du
Summary of the content on the page No. 15
We also recommend wrapping the outside of all System Grounding plastic ducts with bare copper wire to ground the outside of the system against static electricity build-up. Wire connections at Y’s and T’s should be made with wire nuts. Since plastic hose is abundant, relatively inex- pensive, easily assembled, and airtight, it is a Attach the bare ground wire to each stationary very popular material for conveying dust from woodworking machine and the dust collector woodworking machines to the dus
Summary of the content on the page No. 16
Summary of the content on the page No. 17
SECTION 6: CLOSURE The following pages contain general machine We recommend you keep a copy of our current data, parts diagram, parts list and Warranty/Return catalog for complete information regarding information for your Model G1163 Dust Collector. Grizzly's warranty and return policy. If you need additional technical information relating to this If you need parts or help in assembling your machine, or if you need general assistance or machine, or if you need operational information, replaceme
Summary of the content on the page No. 18
WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any par- ticular purpose, are hereby limited to th
Summary of the content on the page No. 19
PARTS DIAGRAM AND PARTS LIST 21 18 23 16 22 15 17 12 20 11 14 10 13 4 9 8 3 7 2 24 1 REF PART # DESCRIPTION REF PART # DESCRIPTION 001 P1163001 CASTER 014 P1163014 COLLECTOR BODY 002 P1163002 BASE 015 P1032019 PACKING 003 P1163003 HANDLE 016 P1032018 MOTOR 1 1 1 1 004 PFH16 FLAT HD SCREW /4" - 20 x 1 /4" 017 PFB03 FLANGE BOLT /4" - 20 x /2" 007 PS09M PHLP HD SCREW M5 - 0.8 x 10 018 PSW07 SWITCH 008 P1032006 INLET COVER 020 PWRCRD110L POWER CORD 009 P1028007 LH CAP SCREW M6 - 1.0" x 19 021 G35
Summary of the content on the page No. 20
MACHINE DATA SHEET Customer Service #: (570) 326-3806 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 GRIZZLY MODEL G1163 PORTABLE DUST COLLECTOR Design Type...................................................................................................... Floor Model Overall Dimension & Specifications: Base ................................................................................................................14" x 14" 1 Height ................................................
