Summary of the content on the page No. 1
MODEL G0583Z
DUST COLLECTOR
OWNER'S Ma NUa L
Copyright © April, 2009 By g rizzly industri Al, in C. r evised July, 2010 (JB)
Wa RNiNG: NO pORTiON Of ThiS Ma NUa L May b E REpRODUCED iN a Ny Shap E
OR fORM WiThOUT ThE WRiTTEN app ROva L Of G RiZZLy iNDUSTRia L, iNC.
(For models m Anu FACtured sin Ce 3/09) #JB11718 printed in tA iWAn
Summary of the content on the page No. 2
This manual provides critical safety instructions on the proper setup, operation, maintenance and service of this machine/equipment. Failure to read, understand and follow the instructions given in this manual may result in serious personal injury, including amputation, electrocution or death. The owner of this machine/equipment is solely responsible for its safe use. This responsibility includes but is not limited to proper installation in a safe environment, personnel training and usage
Summary of the content on the page No. 3
Table of Contents iNTRODUCTiON ............................................... 2 SECTiON 5: OpERaTiONS ........................... 20 manual Accuracy ........................................... 2 general ........................................................ 20 Contact info.................................................... 2 SECTiON 6: aCCESSORiES ......................... 21 machine description ...................................... 2 g0583z identification ..................................
Summary of the content on the page No. 4
iNTRODUCTiON Manual a ccuracy Contact info We stand behind our machines. if you have any We are proud to offer this manual with your new service questions, parts requests or general ques- machine! We've made every effort to be exact tions about the machine, please call or write us at with the instructions, specifications, drawings, and the location listed below. photographs of the machine we used when writ- ing this manual. however, sometimes errors do grizzly industrial, inc. happen and w
Summary of the content on the page No. 5
G0583Z identification Filter Cleaning handle Canister Filter motor on/oFF switch Collector inlet port Collection Bag Caster figure 1. model g0583z identification. -3- model g 0583z (mfg. 3/09+)
Summary of the content on the page No. 6
Machine Data Sheet MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL G0583Z 1HP CANISTER DUST COLLECTOR Product Dimensions: Weight........................................................................................................................................................... 65.80 lbs. Length/Width/Height...........................................................................................................15-3/4 x 30
Summary of the content on the page No. 7
Main Specifications: Operation Air Suction Cap.................................................................................................................................... 800 CFM Maximum Static Pressure......................................................................................................................... 3.3 in. Main Inlet Size..............................................................................................................................................4 i
Summary of the content on the page No. 8
SECTION 1: SAFETY For Your Own Safety, Read Instruction Manual Before Operating this Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. Indicat
Summary of the content on the page No. 9
Safety Instructions for Machinery DISCONNECTING POWER SUPPLY. Always APPROVED OPERATION. Untrained operators disconnect machine from power supply before can be seriously hurt by machinery. Only allow servicing, adjusting, or changing cutting tools trained or properly supervised people to use (bits, blades, cutters, etc.). Make sure switch is machine. When machine is not being used, dis- in OFF position before reconnecting to avoid an connect power, remove switch keys, or lock-out unexpect
Summary of the content on the page No. 10
a dditional Safety for Dust Collectors 1. Ma ChiNE USE. t his machine is only 5. avOiDiNG fiRES. do not allow steel to intended to collect wood dust/chips from strike against the impeller—this may pro- woodworking machines. do not use this duce a spark. sparks can smolder in wood dust collector as a vacuum. do not use dust for a long time before fire or flame is this dust collector with machines producing detected. if you accidentally collect metal dust/chips from metal, asbestos products,
Summary of the content on the page No. 11
SECTiON 2: CiRCUiT REQUiREMENTS if you are unsure about the wiring codes in 110/220v Operation your area or you plan to connect your machine to a shared circuit, consult a qualified electri- cian. minimum Circuit size (110v ) .................. 15 Amps minimum Circuit size (220v ) ................. 15 Amps Serious personal injury could occur if you connect the machine to power before com- pleting the setup process. DO NOT connect power Connection Device the machine to the power until instruc
Summary of the content on the page No. 12
SECTiON 3: SETUp Needed for Setup This machine presents serious injury hazards t he following are needed to complete the setup to untrained users. Read process, but are not included with your machine: through this entire manu- al to become familiar with Description Qty the controls and opera- • safety g lasses (for each person) ............... 1 tions before starting the • Wrench or socket 12mm ............................ 1 machine! • phillips h ead s crewdriver #2 ..................... 1
Summary of the content on the page No. 13
box 2: (f igure 4) Qty G0583Z inventory L. Canister Filter ............................................. 1 M. Quick r elease Clamp ................................ 1 N. Foam Adhesive Bag ................................... 1 t he following is a description of the main compo- — Wide Foam strip 5 x 42mm ................... 1 nents shipped with your machine. l ay the compo- — n arrow Foam strip 4 x 20mm ................ 1 nents out to inventory them. O. Canister Cleaning h andle .................
Summary of the content on the page No. 14
hardware Recognition Chart -12- model g 0583z (mfg. 3/09+)
Summary of the content on the page No. 15
Site Considerations G0583Z a ssembly To assemble your dust collector: floor Load r efer to the Machine Data Sheet for the weight 1. install the casters on to the base with (4) and footprint specifications of your machine. 5 ⁄16 18 acorn nuts, as shown in figure 6. the some residential floors may require additional swivel casters can be mounted in the front or reinforcement to support both the machine and rear position, depending on your preference. operator. placement Location Consider ex
Summary of the content on the page No. 16
3. Align the impeller/separator assembly with 8. install the handle onto the top of the canister 5 the supports, and secure it with (6) ⁄16"-18 x and tighten the set screw against the flat of 1 ⁄2" hex bolts (see figure 8). the shaft (figure 10). set screw elbow shaft Flat x 6 figure 10. installing canister handle. 9. place the canister on top of the collector. figure 8. impeller/separator attached to base. 10. position the metal canister clamp around the 4. position the elbow as shown in fig
Summary of the content on the page No. 17
11. secure the wide foam strip around the out- 13. position and tighten the lower bag clamp side bottom rim of the collector and trim the around the wide foam strip to seal and excess (figure 12). secure the lower collection bag (figure 13). Wide Foam strip figure 12. wide foam strip installed and trimmed. 12. slide the clear collection bag around the bottom of the collector so the rim of the bag overlaps onto the foam strip. figure 13. dust collection bag installed. -15- model g 0583z (mfg
Summary of the content on the page No. 18
To test run the machine: Test Run 1. make sure you have read the safety instruc- tions at the beginning of the manual and that the machine is set up properly. Do NOT put hands or 2. make sure all tools and objects used during small objects near inlet setup are cleared away from the machine. openings during opera- tion. Objects sucked into 3. Connect the machine to the power source. the inlet will hit the impel- ler blade. failure to heed 4. turn the machine ON. this warning could result i
Summary of the content on the page No. 19
SECTiON 4: COLLECTiON SySTEM General Material Selection the model g0583z is designed to collect dust you have many choices regarding dust collection from a single woodworking machine. locate the ducting, but flexible hose is the most common. dust collector where it will not interfere with the however, be aware that there is a fire or explo- workpiece being processed, and no more than sion hazard if plastic duct material is used for 10' of ducting is used, otherwise the CFm will dust collect
Summary of the content on the page No. 20
there are also many kinds of pure plastic flex- System Grounding ible hose, such as non-perforated drainage type hose and dryer vent hose. drainage type hose, while being economical, does not quite have the since plastic hose is abundant, relatively inex- flexibility required for dust collection. the inside pensive, easily assembled and air tight, it is a of the duct is also deeply corrugated and can very popular material for conveying dust from increase the static pressure loss by as muc
