Summary of the content on the page No. 1
DISHWASHER
ZSF 6161
ZSF 6161 S
152955 29/0 Instruction Book
UK
Summary of the content on the page No. 2
Contents Safety instructions 3 Installation instructions 19 Fitting under a counter 19 Disposal 3 Levelling 19 Water supply connections 19 Economical and ecological dishwashing 3 Water outlet hose connection 20 Description of the appliance 4 Electrical connection 20 The control panel 5 Hints for test centres 21 Prior to using for the first time 6 The water softener 6 Filling with dishwasher salt 7 Rinse aid 7 In daily use 8 Loading cutlery and dishes 8 The lower basket 8 The cutlery basket 9 The
Summary of the content on the page No. 3
Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. You MUST read it carefu
Summary of the content on the page No. 4
Description of the appliance 1. Upper basket stop 2. Water hardness dial 3. Salt container 4. Detergent dispenser 5. Control panel 6. Rating plate 7. Rinse aid dispenser 8. Filters 9. Lower spray arm 10. Upper spray arm 11. Upper basket 12. Worktop NOTE: this dishwasher has an internal light that turns on and off when the opening and closing of the dishwasher’s door occurs. In case that this light has to be replaced, please contact your local Service Force Centre. IN144 4
Summary of the content on the page No. 5
The control panel Digital display Indicator lights Function buttons On/Off indicator light Door handle On/Off button Programme selection buttons Delay start button Function buttons: in addition to the dishwashing Indicator lights: have the following meanings: programme selected, the following functions can also be set with the help of these buttons: Wash illuminates when the washing and rinsing phases are running. - the setting of the water softener, - the cancelling of a programme in progress.
Summary of the content on the page No. 6
Prior to using for the first time Before using your dishwasher for the first time: b) Setting electronically (The dishwasher must be switched off) 1. Ensure that the electrical and water connections comply with the installation instructions The dishwasher is factory set at level 5. 2. Remove all packaging from inside the appliance 3. Set the water softener 1. Press the On/Off button. The On/Off indicator light 4. Pour 1 litre of water inside the salt container and then fill illuminates (setti
Summary of the content on the page No. 7
Filling with dishwasher salt Rinse aid Only use salt specifically designed for use in Rinse aid is automatically added during the last rinse, ensuring dishwashers. thorough rinsing, and spot and streak free drying. All other types of salt not specifically designed for use in The dispenser, which is positioned inside the door, holds about a dishwasher, especially table salt, will damage the water 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing softener. programmes, depending up
Summary of the content on the page No. 8
In daily use Check if it’s necessary to refill with dishwasher salt or rinse Loading cutlery and dishes aid Sponges, household cloths and any object that can Load cutlery and dishes into the dishwasher. absorb water may not be washed in the dishwasher. Fill with dishwasher detergent . Before loading the dishes, you should: Select a wash programme suitable for the cutlery and - Remove large left-overs. dishes. - Soften remnants of burnt food in pans Start the wash programme. When
Summary of the content on the page No. 9
The cutlery basket The upper basket The upper basket is designed for plates (dessert plates, Long bladed knives stored in an upright position are a saucers, dinner plates of up to 24 cm in diameter), salad potential hazard. bowls, cups and glasses. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Arrange items on and Take care when loading or unloading sharp items such as underneath the cup racks so knives. that water can reach all
Summary of the content on the page No. 10
Adjusting the height of the upper basket Use of detergent If washing very large plates you can load them in the lower Only use detergents specifically designed for use in basket after moving the upper basket to the higher position. dishwashers. We recommend the use of Finish detergents. Maximum height of the dishes in Using no more than the correct amount of detergent upper basket lower basket contributes to reducing pollution. With upper basket raised 20 cm 31 cm Please observe the manufactur
Summary of the content on the page No. 11
Different kinds of detergent Detergent tablets Use of "3 in 1" combi detergents Detergent tablets of different brands dissolve at different General advice speeds. For this reason some detergent tablets cannot These products are detergents with integrated and combined dissolve and develop their full cleaning power during short detergent/rinse-aid and salt functions. programmes. Therefore please use long programmes when using detergent tablets, to ensure the complete removal of 1. Before using the
Summary of the content on the page No. 12
Washing programmes Programme Degree of soil Press the Cycle (4) Consumption values and programme description Energy Water type of load button consumption consumption (in kWh) (in litres) Hot prewash Main wash up to 70°C Heavy soil. Intensive 2 warm rinses Crockery, cutlery, 1,7 - 1,9 23 - 25 Intensive 70° 70° 1 hot rinse pots and pans Drying Cold prewash Normal soil. Main wash up to 65°C or 50°C Auto (1) Automatic Crockery and 1 or 2 cold rinses 1,1 - 1,5 12 - 25 matic 1 hot rinse cutlery Drying
Summary of the content on the page No. 13
Starting a washing programme To interrupt a washing programme in 1. Check that the baskets have been progress loaded correctly and that the spray a) Open the dishwasher door; the programme will stop. arms can rotate freely Close the door; the programme will start from the point at which it was interrupted. b) Press the On/Off button, in this case all the indicator 2. Turn on the water tap lights turn off. Press the On/Off button again; the programme will start from the point at which it
Summary of the content on the page No. 14
Maintenance and cleaning Clean the external surfaces of the machine and control panel Attention! with a damp soft cloth. If necessary use only neutral Under no circumstances may the dishwasher be used without detergents. Never use abrasive products, scouring pads or filters. solvent (acetone, trichloroethylene etc....). Incorrect repositioning and fitting of the filters will produce Ensure that the seals around the door, the detergent and rinse poor washing results. aid dispensers are cleaned r
Summary of the content on the page No. 15
Something not working Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer. Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is in guarantee. ...a flashing fault code appears The dishwasher will not start or stops during operation. The intervention of an alarm
Summary of the content on the page No. 16
...the wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load. The filters in the base of the washing compartment are dirty or incorrectly positioned. Too little or no detergent has been used. Where there are limescale deposits on the di
Summary of the content on the page No. 17
Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk Before calling out an engineer, please ensure you read t
Summary of the content on the page No. 18
Guarantee Conditions Standard Guarantee Conditions European Guarantee We, Zanussi-Electrolux, undertake that if within 12 months of If you should move to another country within Europe then your the date of purchase this ZANUSSI-ELECTROLUX appliance guarantee moves with you to your new home subject to the or any part thereof is proved to be defective by reason only of following qualifications: faulty workmanship or materials, we will, at our option repair or The guarantee starts from the date y
Summary of the content on the page No. 19
570 - 600 600 Installation instructions Any electrical and/or plumbing work required to install Water supply connections this appliance should be carried out by a qualified This dishwasher must be plumbed into a cold water supply. electrician and/or plumber or competent person. For making the connection itself, the coupling nut fitted to the Remove all packaging before positioning the machine. machine’s supply hose is designed to screw onto a 3/4" inch If possible, position the machine next to
Summary of the content on the page No. 20
Water outlet hose connection Electrical connection The end of the drain hose can be connected in the following This appliance must be earthed. ways: The manufacturer declines any responsibility should this safety measure not be observed. 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink If the plug that is fitted to your appliance is not suitable for the running into the machine. socket, it must be cut off and the appropr
