Summary of the content on the page No. 1
DISHWASHER
ZDT 5044
152964 77/0 INSTRUCTION BOOK
UK
Summary of the content on the page No. 2
Contents Safety instructions 3 Installation instructions 20 Building-in 20 Disposal 3 Levelling 20 Fixing to adjacent units 20 Economical and ecological dishwashing 3 Water supply connections 20 Description of the appliance 4 Water outlet hose connection 21 Electrical connection 21 The control panel 4 Hints for test centres 22 Prior to using for the first time 6 Setting the water softener 6 Filling with salt 7 Rinse aid 8 In daily use 9 Loading cutlery and dishes 9 The lower basket 9 The cutlery
Summary of the content on the page No. 3
Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. You MUST read it carefu
Summary of the content on the page No. 4
Description of the appliance 1. Upper basket stop 2. Water hardness switch 3. Salt container 4. Detergent dispenser 5. Control panel 6. Rating plate 7. Rinse aid dispenser 8. Filters 9. Lower spray arm 10. Upper spray arm 11. Upper basket IN155 The control panel Function push buttons Programme selection On/Off Indicator lights push buttons push button Function push buttons: in addition to the dishwashing Indicator lights: have the following meanings: programme selected, the following functions
Summary of the content on the page No. 5
Audible signals Audible signals have been introduced to help indicate which operations the dishwasher is performing: - Setting of the water softener - End of programme - Something not working with the machine Deactivation/activation of the audible signals (The dishwasher must be switched off) Factory setting: audible signals activated 1. Press the On/Off push button. All programme selection push buttons indicator lights will illuminate (setting mode). If only one programme selection push button
Summary of the content on the page No. 6
Prior to using for the first time Before using your dishwasher for the first time: b) Setting electronically (The dishwasher must be switched off) 1. Ensure that the electrical and water connections comply The dishwasher is factory set at level 5. with the installation instructions 2. Remove all packaging from inside the appliance 1. Press the On/Off push button. All programme selection push buttons indicator lights will illuminate (setting mode). 3. Set the water softener If only one programm
Summary of the content on the page No. 7
Filling with salt Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion. To fill: 1. Open the door, remove the lo
Summary of the content on the page No. 8
If you are using dishwasher detergent that already contains Rinse aid rinse aid, the detergent including the rinse aid must be Rinse aid is automatically added during the last rinse, ensuring placed in the detergent compartment. thorough rinsing, and spot and streak free drying. In this case the rinse aid dosage must be deactivated in The dispenser, which is positioned inside the door, holds about orderto avoid a double dosage. 110 ml of rinse aid, which is sufficient for 16 - 40 dishwash
Summary of the content on the page No. 9
In daily use Check if it’s necessary to refill with dishwasher salt or rinse Loading cutlery and dishes aid Sponges, household cloths and any object that can Load cutlery and dishes into the dishwasher. absorb water may not be washed in the dishwasher. Fill with dishwasher detergent . Before loading the dishes, you should: Select a wash programme suitable for the cutlery and - Remove large left-overs. dishes. - Soften remnants of burnt food in pans Start the wash programme. When
Summary of the content on the page No. 10
The cutlery basket Adjusting the height of the upper basket Long bladed knives stored in an upright position are a If washing very large plates you can load them in the lower potential hazard. basket after moving the upper basket to the higher position. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Maximum height of the dishes in Take care when loading or unloading sharp items such as upper basket lower basket knives. With upper
Summary of the content on the page No. 11
Use of detergent Only use detergents specifically designed for use in dishwashers. We recommend the use of Finish detergents. Using no more then the correct amount of detergent contributes to reducing pollution. Please observe the manufacturer’s dosing and storage recommendations as stated on the detergent packaging. Fill with detergent 1. If the lid is closed: press release button (1). The lid springs open. 2. Fill the detergent dispenser (2) with detergent. The marking indicates the dosing
Summary of the content on the page No. 12
Different kinds of detergent Detergent tablets Use of "3 in 1" combi detergents Detergent tablets of different brands dissolve at different General advice speeds. For this reason some detergent tablets cannot These products are detergents with integrated and combined dissolve and develop their full cleaning power during short detergent/rinse-aid and salt functions. programmes. Therefore please use long programmes when using detergent tablets, to ensure the complete removal of 1. Before using the
Summary of the content on the page No. 13
Washing programmes Programme Degree of soil Press the Cycle (3) Consumption values and programme description Programme Energy Water duration type of load push button consumption consumption (in minutes) (in kWh) (in litres) Hot prewash Main wash up to 70°C Heavy soil. Intensive INTENSIVE 2 warm rinses 70 - 80 1,5 - 1,7 18 - 20 Crockery, cutlery, pots and 70°C 70°c 1 hot rinse pans Drying Cold prewash Main wash up to 65°C Normal soil. Normal NORMAL 1 cold rinse Crockery, cutlery, pots and 85 - 9
Summary of the content on the page No. 14
Starting a washing programme In this fully integrated appliance the controls are located on the 7. Unloading the dishwasher top of the door. When selecting a programme, the door needs Hot dishes are sensitive to knocks. The dishes should to be open. therefore be allowed to cool down before removing from the appliance. 1. Check that the baskets have been Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the loaded correctly and tha
Summary of the content on the page No. 15
Maintenance and cleaning Clean the external surfaces of the machine and control panel 9. Put the filter combination in place and lock by turning the with a damp soft cloth. If necessary use only neutral handle clockwise to the stop. During this process ensure detergents. Never use abrasive products, scouring pads or that the flat filter does not protrude above the base of the solvent (acetone, trichloroethylene etc....). washing compartment. Ensure that the seals around the door, the detergen
Summary of the content on the page No. 16
What to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer. ...a flashing fault code appears The dishwasher will not start or stops during operation. The intervention of an alarm is indicated by a combination of flashing indicator lights and intermittent audible signals (see following chart). Open the dishwasher door and carry out the following suggested corrective
Summary of the content on the page No. 17
...the wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load. The filters in the base of the washing compartment are dirty or incorrectly positioned. Too little or no detergent has been used. Where there are limescales deposits on the d
Summary of the content on the page No. 18
Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the Service Force centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk Before calling out an engineer, please ensure you read t
Summary of the content on the page No. 19
Guarantee Conditions Standard guarantee conditions European Guarantee We, Zanussi, undertake that if within 24 months of the date of If you should move to another country within Europe then your purchase this Zanussi appliance or any part thereof is proved guarantee moves with you to your new home subject to the to be defective by reason only of faulty workmanship or following qualifications: materials, we will, at our option repair or replace the same The guarantee starts from the date you fi
Summary of the content on the page No. 20
Installation instructions Any electrical and/or plumbing work required to install Water supply connections this appliance should be carried out by a qualified This dishwasher must be plumbed into a cold water supply. electrician and/or plumber or competent person. For making the connection itself, the coupling nut fitted to the Remove all packaging before positioning the machine. machine’s supply hose is designed to screw onto either a 3/4" If possible, position the machine next to a water tap
