Summary of the content on the page No. 1
DISHWASHER
DE 6954
152969 93/0 Instruction Book
UK
Summary of the content on the page No. 2
Contents Safety instructions 3 Installation instructions 20 Fitting under a counter 20 Disposal 3 Levelling 20 Water supply connections 20 Economical and ecological dishwashing 3 Water outlet hose connection 21 Description of the appliance 4 Electrical connection 21 The control panel 4 Hints for test centres 22 Prior to using for the first time 5 Setting the water softener 5 Filling with salt 6 Rinse aid 6 In daily use 8 Loading cutlery and dishes 8 The lower basket 8 The cutlery basket 9 The up
Summary of the content on the page No. 3
Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. You MUST read it carefu
Summary of the content on the page No. 4
Description of the appliance 1. Upper basket stop 2. Water hardness switch 3. Salt container 4. Detergent dispenser (type A / type B) 5. Control panel 6. Rating plate 7. Rinse aid dispenser (type A / type B) 8. Filters 9. Lower spray arm 10. Upper spray arm 11. Upper basket 12. Worktop IN148 The control panel 1 23 The salt and rinse aid indicator lights are never illuminated Function push buttons: in addition to the dishwashing while a washing programme is running even if filling with salt progr
Summary of the content on the page No. 5
Prior to using for the first time Before using your dishwasher for the first time: b) Setting electronically (The dishwasher must be switched off) 1. Ensure that the electrical and water connections comply with the installation instructions. The dishwasher is factory set at level 5. 2. Remove all packaging from inside the appliance. 1. Press the On/Off push button. 3. Set the water softener. 4. Pour 1 litre of water inside the salt container and then fill 2. Press simultaneously function push
Summary of the content on the page No. 6
Filling with salt Rinse aid Rinse aid is automatically added during the last rinse, ensuring Only use salt specifically designed for use in thorough rinsing, and spot and streak free drying. dishwashers. The dispenser, which is positioned inside the door, holds about All other types of salt not specifically designed for use in 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing a dishwasher, especially table salt, will damage the water programmes, depending upon the dosage setting
Summary of the content on the page No. 7
Top up with rinse aid when the rinse aid indicator light on the Filling with rinse aid control panel illuminates. (Rinse aid dispenser type B) If you are using dishwasher detergent that includes the 1. Open the container by turning the lid (A) anticlockwise. rinse aid function, it is necessary to deactivate the inflow of 2. Add the rinse aid until the container is completely full. The rinse aid, in order to avoid a double dosage. maximum level for filling is indicated by "max". Deactivat
Summary of the content on the page No. 8
In daily use Check if it’s necessary to refill with special salt or rinse aid Loading cutlery and dishes Load cutlery and dishes into the dishwasher. Sponges, household cloths and any object that can Fill with dishwasher detergent . absorb water may not be washed in the dishwasher. Select a wash programme suitable for the cutlery and Before loading the dishes, you should: dishes. - Remove large left-overs. Start the wash programme. - Soften remnants of burnt food in pans When load
Summary of the content on the page No. 9
In case that plates are loaded in the upper The cutlery basket basket: Long bladed knives stored in an upright position are a load them starting from the potential hazard. rear positions of the basket; Long and/or sharp items of cutlery such as carving knives tilting them slightly forwards must be positioned horizontally in the upper basket. and avoiding the front Take care when loading or unloading sharp items such as positions near the door. knives. Removable knife basket Long and/or sharp ite
Summary of the content on the page No. 10
For all programmes with prewash, an additional detergent Use of detergent dose (5/10 g) must be placed into the WRD detergent Only use detergents specifically designed for use in dispenser, located in the centre of the upper basket. dishwashers. This detergent will take effect during the prewash phase Using no more then the correct amount of detergent contributes to reducing pollution. Prior to the start of a wash programme (not for the "Rinse and Hold" programme, that does not require the use
Summary of the content on the page No. 11
Different kinds of detergent Detergent tablets Use of "3 in 1" combi detergents Detergent tablets of different brands dissolve at different General advice speeds. For this reason some detergent tablets cannot These products are detergents with integrated and combined dissolve and develop their full cleaning power during short detergent/rinse-aid and salt functions. programmes. Therefore please use long programmes when using detergent tablets, to ensure the complete removal of 1. Before using the
Summary of the content on the page No. 12
Washing programmes Programme Degree of soil Press the Cycle (3) Consumption values and programme description Programme duration Energy Water type of load button (in minutes) consumption consumption (in kWh) (in litres) Hot prewash 70° Main wash up to 70°C Heavy soil. Intensive 70° 2 warm rinses INTENSIVE Crockery, cutlery, 85 - 95 1,85 - 1,95 21 - 23 WRD 1 hot rinse WRD pots and pans Drying Cold prewash Normal soil. Main wash up to 65°/50°C Auto 65° - 50° Crockery and 1 cold rinse 90 - 110 1,1
Summary of the content on the page No. 13
Starting a washing programme To cancel a washing programme in 1. Check that the baskets have been progress loaded correctly and that the spray To cancel a washing programme you have to reset the arms can rotate freely dishwasher; press simultaneously the function push buttons 2 and 3 for about 2 seconds, the indicator light of the running programme starts flashing for about 2 seconds. After about 2 seconds all the indicator lights 2. Turn on the water tap will turn off (except for th
Summary of the content on the page No. 14
8. End of the washing programme The dishwasher will automatically stop. The end of programme (END)indicator light is illuminated. In the digital display appears 0 (remaining programme time), only in this case the programme has ended. If he door is not immediately opened at the end of the programme, air will circulate inside the dishwasher to prevent residual steam recondensing on the dishes as water droplets. This device operates intermittently for about 20 minutes, as long as the dishwash
Summary of the content on the page No. 15
Maintenance and cleaning Clean the external surfaces of the machine and control panel Under no circumstances may the dishwasher be used with a damp soft cloth. If necessary use only neutral without filters. detergents. Never use abrasive products, scouring pads or Incorrect repositioning and fitting of the filters will solvent (acetone, trichloroethylene etc....). produce poor washing results. Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly wit
Summary of the content on the page No. 16
What to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer. ...a flashing fault code appears The intervention of an alarm is indicated by a combination of flashing indicator lights (see following chart) and a fault code visible in the digital display. Carry out the following suggested corrective actions. Important: If you call out an engineer to a fault listed belo
Summary of the content on the page No. 17
...the wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load. The filters in the base of the washing compartment are dirty or incorrectly positioned. Too little or no detergent has been used. Where there are limescales deposits on the d
Summary of the content on the page No. 18
Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk Before calling out an engineer, please ensure you read t
Summary of the content on the page No. 19
Guarantee Conditions Standard Guarantee Conditions European Guarantee We, Zanussi Electrolux, undertake that if within 12 months of If you should move to another country within Europe then your the date of purchase this ZANUSSI ELECTROLUX appliance guarantee moves with you to your new home subject to the or any part thereof is proved to be defective by reason only of following qualifications: faulty workmanship or materials, we will, at our option repair or The guarantee starts from the date y
Summary of the content on the page No. 20
570 - 600 600 Installation instructions Any electrical and/or plumbing work required to install Water supply connections this appliance should be carried out by a qualified This dishwasher must be plumbed into a cold water supply. electrician and/or plumber or competent person. For making the connection itself, the coupling nut fitted to the Remove all packaging before positioning the machine. machine’s supply hose is designed to screw onto either a 3/4" If possible, position the machine next t
