Summary of the content on the page No. 1
Dishwasher — Technical Information
ADB/CDB1500AW*, ADB2500AW*, CDU650AW*, DDB1501AW*,
PDBL390AW*, MDBH945AW*, MDBH955AW*, MDBH965AW*, MDBM601AW*,
MDBS561AW*, MDBTT50AW*, MDBTT60AW*, MDBTT70AW*, MDB4651AW*,
MDB5601AW*, MDB6601AW*, MDB7601AW*
• Due to possibility of personal injury or property damage, always contact an authorized technician for servicing or
repair of this unit.
• Refer to Service Manual 16021814 for detailed installation, operating, testing, troubleshooting, and disassembl
Summary of the content on the page No. 2
Component Specifications WARNING ! To avoid risk of electrical shock, personal injury, or death, disconnect power to dishwasher before servicing. Benefits MDBS561AW* MDBTT60AW* MDB4651AW MDB7601AW* * Wash cycles 4 5 4 5 Heavy Wash X X X X Normal Wash X X X X Quick Wash Light Wash X X X Insta Wash X Rinse Only X X X X Features Sound package QuietSeries™ QuietSeries™ QuietSeries™ QuietSeries™ 300 300 200 400 High Temp X X X X Wash Electronic X X X X Controls *San
Summary of the content on the page No. 3
Component Specifications WARNING ! To avoid risk of electrical shock, personal injury, or death, disconnect power to dishwasher before servicing. Illustration Component Test Procedure Results Dishwasher Motor Measure resistance from ST5 (Motor Common – blue) to ST8 CCW rotation only (Motor Main - yellow).......................... 3 to 4 Ω viewed from shaft See Component Specifications/Motor end. Connections for details. 1/3HP 120V/60hz, 3.2 amps, 3250 RPM Main
Summary of the content on the page No. 4
Component Specifications WARNING ! To avoid risk of electrical shock, personal injury, or death, disconnect power to dishwasher before servicing. Illustration Component Test Procedure Results Limit Thermostat Close on Temperature drop @ 149°F ± 7°F (Temp) ....................................... 0 Ω = Closed Open on Temperature drop @ 164°F ± 4°F (Temp) ....................................... Infinite Ω = Open Sensor/Thermistor 10KΩ ± 3% at 77°F and 2.4 k Ω ±
Summary of the content on the page No. 5
Component Readings/Testing WARNING ! To avoid risk of electrical shock, personal injury, or death, disconnect power to dishwasher before servicing. Manual Function Test Field Service Test A Manual Function Test may be started by pressing the Heated Dry key A Field Service Test may be started by pressing the Heated Dry key 6 times 5 times followed by the Start key within 8 seconds. followed by the Start key within 8 seconds. This test must be performed with clean water to insure proper
Summary of the content on the page No. 6
Resistance Check Points and Values Disp. WM (2K**) Water Valve Thermistor (thru harness only with (1.1K**) connector unplugged)*** o (float switch *Vent WM Drain Motor 10K* +/- 3% @ 77 F must be closed) o (1.2K**) (25**) 2.4K* +/- 6.5% @ 140 F Pin# 1 234 5 6 78 Pin# 12 3 4 StakeLug 11 10 9 8 7 6 5 4 321 WH WH OR RD RD AQ PU BK PU TN AQ YL GY BU BK BK RD BK J5 J6 Circuit Board Use the "Manual Function Test" as described on the electrical schematic sheet to 1 check components before opening the do
Summary of the content on the page No. 7
Control Definition WARNING ! To avoid risk of electrical shock, personal injury, or death, disconnect power to dishwasher before servicing. Designed to provide a longer cycle for Designed to auto washing items with select the number heavy food soils. of fills and length Water usage is 8 of wash times gallons. based on soil level of dish Designed to wash load. Water loads containing usage ranges dishes with normal from 3 to 8 amounts of food
Summary of the content on the page No. 8
Control Definition WARNING ! To avoid risk of electrical shock, personal injury, or death, disconnect power to dishwasher before servicing. Options Cycles Options Cycles 16026393 8 July 2005 ©2005 Maytag Services
Summary of the content on the page No. 9
Motor Connectivity WARNING ! To avoid risk of electrical shock, personal injury, or death, disconnect power to dishwasher before servicing. Wire harness (Start) Connection plug Green (Ground) Yellow (Main) Blue (Common) 1/3HP 120V/60hz, 3.2 amps, 3250 RPM July 2005 9 16026393 ©2005 Maytag Services
Summary of the content on the page No. 10
FILL DRY CYCLE (Front Only Display Models) RINSE ONLY CYCLE RINSE DRAIN FILL 1:36 min HEATER HEATER HEATER HEATER HEATER HEATER HEATER HEATER HEATER HEATER HEATER HEATER HEATER HEATER HEATER HEATER 5:00 2:00 0:02 9 Minutes 1:46 max ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF 3:00 1:30 1:00 1:30 1:00 1:30 1:00 1:30 1:00 1:30 1:00 1:30 1:00 1:30 1:00 9:30 Available Options: No options are available with the Rinse Only cycle. Note:If i Heated Drysnotselected,theheaterwillnotbeactivatedd
Summary of the content on the page No. 11
COLOR CODE AQ AQUA BK BLACK BU BLUE BR BROWN GY GRAY GN GREEN OR ORANGE PK PINK PU PURPLE RD RED TN TAN WH WHITE YL YELLOW Wiring Diagram WARNING ! To avoid risk of electrical shock, personal injury, or death, disconnect power to dishwasher before servicing. July 2005 11 16026393 ©2005 Maytag Services
