Summary of the content on the page No. 1
% .#
" *
Positioning and levelling
Connecting the water and electricity supplies
Technical data
Electrical Connection
Overall view
Control panel
Display
!" # $
Lower rack
Cutlery basket
Upper rack
% ! %
Starting the dishwasher
Loading the detergent
Washing options
& '
Wash cycle table
! ! ! (
Loading the rinse aid
Loading the refine
Summary of the content on the page No. 2
Keep this instruction manual in a safe place for
" 0 / future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the • To a suitable cold water connection point: before machine, so that the new owner may benefit from the attaching the hose, run the water until it is advice contained within it. perfectly clear so that any impurities that may be present in the water do not clog the appliance; Please read this
Summary of the content on the page No. 3
" 0 % !, " !" 0 & / Connect the outlet hose (without bending it) to a After the appliance has been installed, immediately drain duct with a minimum diameter of 4 cm. before running the first wash cycle, completely fill Alternatively, rest it over a sink or tub; the free end the salt dispenser with water and add approximately of the hose should not remain immersed in water. 2 kg of salt (see Rinse aid and refined salt). The water may overflow:
Summary of the content on the page No. 4
Electrical Connection As the colours of the wires in the mains lead may not / If your appliance is supplied with a 13 amp. fused correspond with the coloured markings identifying the plug it can be plugged into a 13 amp socket for terminal in your plug, proceed as follows: immediate use. Before using the appliance please connect Green & Yellow wire to terminal market “E E E” E E or read the instruction below. coloured Green or Green & Yellow. Connect Brown wire to terminal
Summary of the content on the page No. 5
8, ,0 / *6 Upper rack 6 Upper sprayer arm 6 Tip-up compartments 6 Rack height adjuster 6 Lower rack 1 $6 Lower sprayer arm 3 4 6 Cutlery basket 2 '6 Washing filter (6 Salt dispenser * 6 Detergent and rinse aid dispensers **6 Data plate 5 6 7 9 8 10 11 8/877
+ 9 button --;-
9
9 -- <- 9/1 button
- button* button* Knob 7 8 button* & 8 / + indicator light* 8
Summary of the content on the page No. 6
!" # Before loading the rack, remove all food residue from the If the rack is equipped with the click / crockery, leave saucepans and frying pans with burnt-on clack handles* (see figure), pull residue to soak in water only and empty all remaining liquid them upwards or downwards to from cups and glasses. After loading the appliance, check adjust the height. that the sprayer arms can rotate freely. 0 # Arrange the more difficult items to wash using the Loading examples as a
Summary of the content on the page No. 7
% ! % " ! 0 compartment A compartment A compartment A compartment A compartment A: Washing D / A detergent B 1. Turn the water tap on. compartment B compartment B c compartment B compartment B ompartment B: Pre-wash 2. Press the ON/OFF button: the display will light up. detergent 3. Measure out the detergent (see below). 1. Open cover C by pressing 4. Load the racks (see Loading the racks) and shut the door. button D. 5. Select the programme by turning the WASH CYCL
Summary of the content on the page No. 8
& & . / INDESIT dishwashers are equipped with an automatic filter cleaning system so that they do not become clogged with food residues. This function may extend the duration of the wash cycles. If there is a high level of dirt contained in the filters, the dishwasher will stop operating (see Troubleshooting - Blocked filter alarm). If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of det
Summary of the content on the page No. 9
! ! ! Only use products that have been specifically designed 1. Remove the lower rack and / for dishwashers. unscrew the cap of the dispenser (in Do not use table salt or industrial salt. an anti-clockwise direction). 2. For the first wash cycle only: fill the If using a multi-functional product, it is not necessary to add dispenser up to the edges with water. rinse aid; however, we recommend that you add salt, 3. Position the funnel provided especially if you live in an
Summary of the content on the page No. 10
! ) %" 0 ! &
" / % The filters remove food residue from the water used Turn off the water tap after every wash cycle to in the wash cycle: to obtain the best results from avoid leaks. each wash, they should be cleaned. Remove the plug from the socket when cleaning Clean the filters regularly. the machine and when carrying out maintenance work. After cleaning check that the filter assembly has been replaced correctly.
Summary of the content on the page No. 11
+ % ! !, The appliance was designed and manufactured Consumers should contact their local authority or / in compliance with current international safety retailer for information concerning the correct standards. The following information has been disposal of their old appliance. provided for safety reasons and should therefore be read carefully. ," "& ! " 1 & , ) The appliance was designed for domestic use ," 0 ! "& inside
Summary of the content on the page No. 12
- %. "
Whenever the appliance fails to work, check for a solution from the following list before calling for Technical / Assistance Centre. Some problems are indicated by specific codes that flash on the display: make a note of any codes displayed before calling Assistance.
