Summary of the content on the page No. 1
Dishwasher
DW12-PFE2-U
DW12-PFE2ME-U
Instructions for Use
en
0120505655
Summary of the content on the page No. 2
Index Safety information 2 Installation 4 6 Getting to know your dishwasher 7 How to fill the salt 9 How to fill rinse aid 9 How to fill the detergent dispenser 10 Not suitable for the dishwasher 11 Arranging crockery, glasses, etc. in the dishwasher 13 Programme overview 15 Washing dishes 18 How to keep your dishwasher in shape 19 Care and maintenance 21 Fault finding 25 Technical data 25 Important information 1
Summary of the content on the page No. 3
Safety information At time of delivery Check packaging and dishwasher immediately for signs of transport damage. If the appliance is damaged, do not put it into use but contact your supplier or customer service without delay. Please dispose of packaging materials properly. During installation Site the dishwasher and connect it up in accordance with the installation instructions. The dishwasher must not be connected to the electricity supply while installation is being carried out. Ensure that th
Summary of the content on the page No. 4
If your family includes children The appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance. Keep detergents out of the reach of children, who must also be kept away from the dishwasher when it is open. If a fault occurs If the appliance malfunctions, turn off water supply to the appliance and disconnect the plug from the wall socket. Then, consult the section entitled, "Fau
Summary of the content on the page No. 5
Installation Positioning the appliance Positioning the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation. Levelling the appliance Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the dishwasher, making it level. In any case, the appli
Summary of the content on the page No. 6
Electrical Connection After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical system is correct for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly (the earthing of the appliance is a safety requirement mandated by law). If the electrical socket to which the appliance must be connected
Summary of the content on the page No. 7
Getting to know your dishwasher Close-up view (control panel) C E H J A BD F G I Time-remaining Indicator A ON-OFF Button F Low Salt Indicator B "Speedup Wash" Button G Low Rinse Aid Indicator C H "Speedup Wash" Indicator Programme Button D I Delayed Start Button Programme Indicator J E Delayed Start Indicator Dishwasher interior a i c j e f k b d g h a g Upper Rack Washing Filter b h Lower Rack Detergent and Rinse Aid Dispenser c i Top Spray Arm Water Inlet Hose d j Silverware Basket Drain Hose
Summary of the content on the page No. 8
How to fill the salt Salt The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils. The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water. Loading the salt into the container Always use salt intended for use with dishwashers. The salt container is located beneath the lower rack and should be filled as follows: When the low salt indic
Summary of the content on the page No. 9
Adjusting salt consumption The dishwasher is designed to allow for adjusting the amount of salt consumed based on the hardness of the water used. This is intended to optimize and customize the level of salt consumption so that it remains at a minimum. To adjust salt consumption, proceed as follows: Unscrew the cap from the salt container; There is a ring on the container with an arrow on it (see figure to the side), If necessary, rotate the ring in an anticlockwise direction from the "-" setting
Summary of the content on the page No. 10
How to fill rinse aid How to fill rinse aid How to fill rinse aid How to fill rinse aid How to fill rinse aid Rinse aid Rinse aid Rinse aid Rinse aid Rinse aid This product makes dishes sparkle and helps them to dry without spotting. The dispenser is located on the inside panel of the door . When the low rinse aid indicator “H H” lights, you must load rinse aid . H H H H Loading the rinse aid Loading the rinse aid Loading the rinse aid Loading the rinse aid Loading the rinse aid Regardless of th
Summary of the content on the page No. 11
Not suitable for the dishwasher What you should not put into the dishwasher Cutlery and tableware manufactured in whole or part from wood.They become faded and unsightly in appearance.Furthermore,the adhesives that are used are not suitable for the temperature that occur inside the dishwasher.Delicate decorative glassware and vases,special antique or irreplaceable china. The decorative patterns on such items will not be dishwasher-proof. Plastic objects that are not resistant to hot water, coppe
Summary of the content on the page No. 12
Arranging crockery, glasses, etc. in the dishwasher Before placing the dishes in the dishwasher, remove larger food particles to prevent the filter from be- coming clogged, which results in reduced performance. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they are soaked before washed. This will eliminate the need for extra wash cycles. Pull out the rack to load the dishwasher. Normal daily load How to use the lower rack We recommend that you place
Summary of the content on the page No. 13
How to use the upper rack The upper rack is designed to hold more delicate and lighter dishware, such as glasses, cups and saucers, plates, small bowls and shallow pans (as long as they are not too dirty). Position the dishes and cookware so that they do not get moved by the spray of water. The upper rack can be adjusted for height by using the knobs fig.E located on both sides of the rack itself (see fig.E). Adjust the upper basket to the higher level and you have more space to accommodate thos
Summary of the content on the page No. 14
Programme overview Type of Condi- Type of Amount of crokery e.g. Wash tion of china, pots/ Speedup food food Description of cycle pan s, food programme Wash cutiery, remains remains remains glasses, etc Pre-wash with hot water. Extended wash at 70°C. Soups, Non- Rinses with cold water. casseroles, Intensive delicate Rinse with hot water. stuck sauces, a lot Wash Drying. on hard potatoes, Pre-wash use cold water. pasts, rice, Extended wash at 55°C. eggs, roast or Rinse with cold water. fried food
Summary of the content on the page No. 15
Detergent Delayed Energy Water Duration in Rinse Aid Start consump- consump- Extended minutes Prewash tion in kWh tion in litres Wash 5g 25g 112 18 1.62 5g 15g 94 16 1.48 5g 25g 102 15 1.24 5g 15g 90 14 1.15 (*) 5g 25g 162 14 1.05 5g 20g 142 13 1.00 92 12 1.12 15g 82 10 1.10 10g 31 9 0.40 15g 29 8 0.30 10g 12 3 0.02 12 3 0.02 * EN50242 test with rinse aid setting 5 14 Laboratory measured valve in accordance with European Standard EN50242
Summary of the content on the page No. 16
Washing dishes Programme selection The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as well as the amount and condition of food remains, with the details contained in the wash cycle table.The corresponding programme sequence, duration and consumption details are shown in the right half of the overview. For example: Use the« normal» programme for dishes and utensils which have plenty of food remains stuck on hard. Earn savings If only a smal
Summary of the content on the page No. 17
End of programme Six beeps will indicate that the wash cycle has finished and all the programme indicators light. Switching the dishwasher OFF Several minutes after the programme has ended: Set main switch “A” to OFF. Open the door . Turn the water tap off. Remove dishes, etc. when they have cooled down. Interrupping the programme Open the door. Caution! There is a risk of water squirting out from inside the appliance. Do not open the door fully until spray arm has stopped rotating. When you op
Summary of the content on the page No. 18
If the the door is closed, after 5 seconds the delayed start indicator “ E ” lights , the time-remaining indicator “ F ” will blink and decrease , the programme will start until the delayed start indicator “ F ” goes out . Cancelling or modifying a cycle A cycle that is underway can be modified if it has only been running for a short time. Otherwise, the detergent may have already been used, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser
Summary of the content on the page No. 19
How to keep your dishwasher in shape After Every Wash After every wash, turn off the water supply the appliance and leave the door slightly ajar so that moisture and odors are not trapped inside. Remove the plug Before cleaning or performing maintenance, always remove the plug from the socket. Do not run risks. No solvents or Abrasive Cleaning Products To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Rather, use only a cloth and warm so
Summary of the content on the page No. 20
Care and maintenance Regular inspection and maintenance of your appliance helps to prevent problems from occurring.This saves time and aggravation.You should therefore carefully inspect the inside of your dishwasher from time to time. Overall condition of appliance Check that no grease or scale has accumulated on the inside of the dishwasher. If you discover any deposits: Clean the interior of the dishwasher thorughly with a detergent solution. H Dishwasher salt Check the LOW SALT indicator “ G
