Summary of the content on the page No. 1
CMA 5000 - UTA SPECIFICATIONS
Universal Transport Analysis Module / SDH/SONET Application
Content
· The perfect tool for testing SDH & SONET core networks up to 10 Gbps
· Testing APS switch time reaction of the network with 125 μs resolution
· Auto-discovery of the signal structure
· Field exchangeable XFP and SFP
· Fast and professional reports
The perfect tool for testing SDH & SONET core networks up to 10 Gbps
SDH and SONET technologies are firmly established in the
Summary of the content on the page No. 2
Key Features Key Applications · · SDH/SONET interfaces up to 10 Gbps · · Installation, commissioning and troubleshooting tests · · · · · · · · Pluggable XFP & SFP – 1310 nm / 1550 nm · · · · Check the switch time reaction of the network after failure – should not exceed 50 ms · · · · Generates and analyzes SONET/SDH frames down to the tributary level (DS1/E1) · · · · Verify QoS with objective performance tests in compliance with ITU-T and Telcordia standards · · · · Aut
Summary of the content on the page No. 3
Testing APS switch time reaction of the network with 125 μs resolution Due to the large amount of information being transferred over Synchronous Optical Network (SONET/SDH), it is extremely important to ensure that the transport services are as readily available as possible. APS -Automatic Protection Switching- is the protection mechanism that has been implemented in SDH/SONET networks in order to guarantee the availability of the network in case of problems. The protection process invol
Summary of the content on the page No. 4
Auto-discovery of the signal structure When performing tests in the field, it is sometimes difficult to configure the test equipment as the signal to be analyzed is not always known: is the signal concatenated, what the frame mapping structure is, are the containers of the frame all equipped or partially equipped? In such a situation, configuring the test equipment can be very painful and time consuming. The “Structure Scan” function of the UTA application brings a smart solution to th
Summary of the content on the page No. 5
Fast and professional reports Creating professional report has never been so easy with the UTA application. After stopping a measurement, the report is just one click away: produce, save, print reports directly from the application. Select the set of results you want to produce, fill in the header information associated with the measurement and the UTA application will generate professionally presented reports in PDF format. Fig.4: Generate automatic test report in PDF format wi
Summary of the content on the page No. 6
Specifications Interfaces and Signal Specifications Signal Port/Connector Format 1 STM-64 / OC-192 One XFP port - SDH: as per ITU-T G.707 - SONET: as per Telcordia GR-253-Core 1 STM-1 / STM-4 / STM-16 (option) One SFP port - SDH: as per ITU-T G.707 OC-3 / OC-12 / OC-48 (option) - SONET: as per Telcordia GR-253-Core Bantam 100 Ohms E1 (2.048 Mb/s) / DS1 (1.544Mb/s) Clock Input BNC 75 Ohms 2.048MHz/1.544MHz/10MHz BNC 75 Ohms 2.048MHz/1.544MHz Clock Output SMA 50 Ohms 622.08
Summary of the content on the page No. 7
DCC Signals The UTA-SDH/SONET application supports the drop and insert of DCC channels from SONET/SDH · D1-D3: 192 Kb/s · D4-D12: 576 Kb/s SONET Mappings ISO 9001:2000 certified. ICMA5KUTASTM64-SPEC05-0806-A4. ©2008 Anritsu. All Rights Reserved. Page 7 of 14
Summary of the content on the page No. 8
SDH Mappings Test Pattern 9 11 15 20 23 29 31 PRBS Patterns · PRBS: 2 -1, 2 -1, 2 -1, 2 -1, QRSS, 2 -1, 2 -1, 2 -1 inverted and non-inverted Word Patterns · All “1” pattern, all “0” pattern, alternative “01” pattern, “1000” pattern, “1010” pattern, user- defined 2 bytes word pattern, 1 in 8, 2 in 8, 3 in 24, T1 Daly ISO 9001:2000 certified. ICMA5KUTASTM64-SPEC05-0806-A4. ©2008 Anritsu. All Rights Reserved. Page 8 of 14
Summary of the content on the page No. 9
SONET/SDH Overhead Editors SONET TOH Editor · All bytes of TOH (STS-1/STS-3) are programmable except B1/B2, H1/H2/H3 and Z0 · J0 (Trace Identifier): o programmable 62 bytes ASCII sequence, CRLF added or o programmable 15 bytes ASCII sequence, CRC (E.164) added or o programmable byte POH Editor (STS) · C2, G1, F2, H4, Z3, Z4, N1 · J1 (Trace Identifier): o programmable 62 bytes ASCII sequence, CRLF added or o programmable 15 bytes ASCII sequence, CRC (E.164) added or o programm
Summary of the content on the page No. 10
Alarm Addition SONET/DSn · LOS, LOF, SEF, TIM-S, AIS-L, RDI-L, AIS-P, LOP-P, TIM-P, PLM-P, UNEQ-P, RDI-P, LOM-V, AIS-V, LOP-V, PLM-V, UNEQ-V, RDI-V, TIM-V, RFI-V, LOMF, LSF, OOF, RAI, IDLE, LSS, LPS, AIS SDH/PDH · LOS, LOF, OOF, RS-TIM, MS-AIS, MS-RDI, AU-AIS, AU-LOP, HP-PLM, HP-TIM, HP-UNEQ, HP-RDI, TU-LOM, TU-AIS, TU-LOP, LP-PLM, LP-UNEQ, LP-TIM, LP-RDI, LP-RFI, AIS, RDI, LOMF, LSS, LPS Alarm Control · On steady-state or programmable number of frames Voice Add/Drop (Option) S
Summary of the content on the page No. 11
Path Analysis Signal Qualification · Power meter · Frequency meter · SONET/DSn Errors Analysis A1/A2, B1, B2, REI-L, B3, REI-P, V5, REI-V, FAW (FAS), SFAW, FPS, MAW, Parity P, Parity CP, F-bit, M-bit, FEBE, CRC-6, PRBS, Word, ERR · SDH/PDH A1/A2, B1, B2, MS-REI, B3, LP-B3, HP-REI, V5, LP-REI, FAW (FAS), CRC-4, REI (E-bit or REBE), PRBS, Word, ERR · SONET/DSn Alarms Analysis LOS, LOF, SEF, TIM-S, AIS-L, RDI-L, AIS-P, LOP-P, TIM-P, PLM-P, UNEQ-P, RDI-P, LOM-V, AIS-V, LOP-V, PL
Summary of the content on the page No. 12
Performance Analysis · Direct graphical presentation of performance and availability conformance test result · Automatic calculation of acceptance thresholds according to ITU-T recommandations, such as M.2100, M.2101.1 and M.2101 · Automatic calculation of Performance Objectives according to ITU-T recommendations such as G.826, G.828 Structure Scan · Complete signal mapping auto discovery (including Mix Payload) Trouble Scan · Continuous VC-4/SPEs scanning for alarms and err
Summary of the content on the page No. 13
Ordering Information Ordering Information 5610-000-UTA UTA base module *Applications must be ordered separately 5610-201-UTA 10 Gig SONET/SDH application (XFP not included) Options 5610-211-UTA Concatenation option for 10 Gig SONET/SDH application 5610-212-UTA Voice add/drop option for 10 Gig SONET/SDH application (only available for SONET) 5610-213-UTA Tandem Connection Monitoring option for 10 Gig SONET/SDH application 5610-214-UTA ATM option 10 Gig SONET/SDH applicat
Summary of the content on the page No. 14
Anritsu Corporation · Italy · Singapore 5-1-1 Onna, Atsugi-shi, Kanagawa, 243-8555 Anritsu S.p.A. Anritsu Pte Ltd. Japan Via Elio Vittorini, 129, 00144 Roma, Italy 60 Alexandra Terrace, #02-08, The Comtech Phone: +81-46-223-1111 Phone: +39-6-509-9711 (Lobby A), Singapore 118502 Fax: +81-46-296-1264 Fax: +39-6-502-2425 Phone: +65-6282-2400 · U.S.A. Fax: +65-6282-2533 · Sweden Anritsu Company Anritsu AB · India 1155 East Collins Blvd., Richardson, TX 75081, Anritsu Pte.
